SnapPad for 2006 Fleetwood Excursion 39S

Question

Question:

I have a 2006 Fleetwood Excrsion 39S and pruchased the 10 Pads through etrailer but cant seem get them to attach to my pads

asked by: Robert I

0

Expert Reply:

Hey Robert!

The SnapPad HiWay 10 Jack Pads for HWH and Atwood Leveling Systems w/ 10" Round Jack Feet - Qty 4 # SN58FR are made specifically for HWH and Atwood 10" diameter foot pads, so I'd like to make sure that the leveling system that you have is either HWH or Atwood. If you have a different brand or diameter, the pads won't fit for your setup. It's important not to try to force the fit because that could damage the feet.

For your Fleetwood Excursion 39S, I'm showing the factory leveling system was a PowerGear so you would instead use SnapPad Prime Jack Pads for Power Gear Leveling Systems w/ 10" Round Concave Jack Feet - Qty 4 # SP84FR4. If you aren't the original owner (or if you'd just like extra confirmation), you can just check for branding on the leveling system to confirm that your coach still has a PowerGear jack. From there, you'll be 100% good to move forward with the # SP84FR4 and you can contact our customer service department to return the # SN58FR.

Are you replacing current the pads on your leveling system or just looking to extend the life of the feet with the pads? Do you usually camp on gravel, paved parks, or grassy areas?

expert reply by: Jerry B

0

Robert I.

7/22/2026

Hey Jerry I'm the second owner of my Fleetwood Excursion 39S, I can confirm with Fleetwood by providing my vin # if the factory equipment installed was the PowerGear then we will move forward with exchanging them for the correct Pads. Currently I am camped at a grassy/gravel site for a project and I'm working and I'm looking for the stablity the correct SnapPad would provide for my rig. I will check today and provide you with an update, if I confirm the unit has the Power Gear Leveling Systems w/ 10" Round Concave Jack Feet should I contact customer service firse befor ordering the 4 # SP84FR4? Thanking you in advance. Robert

Jerry B.

7/22/2026

@RobertI Yes, customer service can get you taken care of I've actually already sent a message to the associate you were emailing previously so that she can get you taken care of so if you just shoot a reply in that thread, she'll get you squared away! The SnapPads are great for both grass and gravel to keep you level and protect the feet, so you won't be disappointed once you have the correct pads on your camper.

Answer 1

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 2

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 3

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 4

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 5

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 6

Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…

view full answer...

Answer 7

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 8

Hi JD; the Furrion Chill Cube #FR49TD air distribution box has a vent on it you can open and close. See the picture attached below. When it is closed it forces more of the air through the ducted system. Assuming you have a ducted system you will need…

view full answer...

Answer 9

Hey Matt, Furrion typically has 4 wires running to their thermostats and the Chill Cube Thermostat #LC74DX is no exception. The harness you see with the thermostat would plug into the Chill Cube's controller and has 4 wires to extra wire to to…

view full answer...

Answer 10

Hey Robert! The SnapPad HiWay 10 Jack Pads for HWH and Atwood Leveling Systems w/ 10" Round Jack Feet - Qty 4 #SN58FR are made specifically for HWH and Atwood 10" diameter foot pads, so I'd like to make sure that the leveling system…

view full answer...

Answer 11

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 12

Hey Ken, yes the Replacement Pad for SnapPad Jack Stand Pad System #SP74FR that you referenced is made by Snappad. This is for sure not a knock off! What camper do you have?

view full answer...

SnapPad for 2006 Fleetwood Excursion 39S

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching