What SnapPads Will Work For 2026 Lance 1172 Truck Bed Camper?

Updated 01/20/2026 | Published 12/17/2025

Products Featured in This Question

SnapPad SnapJack QD RV Stabilizer Jack Pads - Qty 4

(74)

$249.95

SnapPad Mini Jack Pads for Truck Campers and Travel Trailers w/ 5-1/2" Round Jack Feet - Qty 4

(382)

$119.95

Question:

Does the snappads mini will fit on the Happy jack of a 2026 Lance 1172 truck-camper? And if so will they still fit if I need the jack lift extender since I have a 2026 F550 chassis cab flatbed Thanks

asked by: Luc M

Expert Reply:

Hello Luc, thanks for reaching out. The SnapPad # SN44VR kit will not fit the HappiJac jacks used on a Lance 1172 truck camper. The # SN44VR is designed for Lippert PSX style trailer stabilizer jacks with 5-1/2 inch square feet, not the round corner jack feet found on Lance campers. HappiJac feet use a different mounting style altogether, so the # SN44VR pads will not attach correctly regardless of configuration.

For Lance truck campers with HappiJac jacks, the correct option is typically the SnapPad Mini 5-1/2" pads part # SN27FR which are made for the 5 1/2 inch round jack feet used on most Lance models. These pads snap onto the existing jack foot, and since the foot size does not change when adding HappiJac lift extenders, the pads will still fit even if you later install the extenders for your 2026 F550 chassis cab flatbed setup. If you can confirm your Lance camper uses the 5-1/2" round feet, you can be sure the # SN27FR will work for you.

expert reply by: Jesse M

Jesse M.

1/19/2026

Hi Luc, did the SnapPad Mini pads end up fitting your Lance 1172 with the HappiJac jacks and lift extenders? Knowing how they worked with your F550 flatbed setup could help others trying the same combo.

Luc M.

1/19/2026

@JesseM Hi Jesse Didn't order yet because I will receive my truck and camper in March. But I still have an interrogation because on the rvsnappad web site they say that the 5,5 don't fit if the "feet" are concave or convex. The video on your web site of the Lippert leg extender says that the feet are either concave or convex. So I'm not sure if they will fit or not. What do you think

Jesse M.

1/20/2026

@LucM Hey Luc. I think I was not clear on which lift extender you were referring to originally but to answer your question, the Lift Extenders for HappiJac Truck Camper Jack Systems # LC182495 would not work with the # SN27FR SnapPads I mentioned. They will fit the 5-1/2" round feet but not the extenders.

Luc M.

1/20/2026

@JesseM So if I understand, if I use the leg extender on my 2026 Lance 1172 I won't be able to use snappads. Is there any alternative solution? Thanks Luc