Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces 1 pad for your SnapPad XTRA Square 5 jack pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits jacks with a 5-1/2" to 5-5/8" square foot.
Features:
Specs:
SnapPads install quickly and easily, and never need to be removed. Install each pad one at a time. Begin by placing the pad beneath your jack, ensuring that the pad and foot are properly aligned.
Lower the jack until the lip of the pad fully engages around its foot and locks into place. You'll hear a snapping sound once the pad is securely installed. Repeat this process for the remaining pads. Installation is permanent, so once you have the SnapPads secured, you'll never have to worry about crawling under your RV to place pads again.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody. This is Jeff at etrailer.com Today we take a look at this replacement pad for the SnapPad XTRA Square 5 jack pad system. This is for a quantity of one pad. Now this part will replace one pad on the SnapPad XTRA Square 5 jack pad system. This is a heavy duty rubber pad it's designed to snap onto your trailer's Level Up leveling jack foot pad to make leveling lock faster and easier. It also eliminates the need to have to crawl under your trailer to position any plastic pads or wood blocks to level your trailer.
This is designed to fit jacks that have a 5 to 5 inch square foot pad. Now with this pad installed the increased surface area of your leveling jack's foot pad provides additional support for your trailer. The diameter on this from one side to the other is about 8 inches. So once this is installed and goes into the ground it helps prevent sinking your foot from sinking into the soft ground unlike smaller metal feet. It is a durable heavy duty rubber, it's made from recycled tires.
And what's nice about it, it'll grip uneven terrain preventing the metal feet from rusting or bending. That'll also serve as a cushion, so the metal feet won't crack or chip your driveway. Plus it'll help to dampen vibration from inside the motor home that could cause shifting. Do you notice in the very middle has this built-in large hole here, it's a drain hole, and that'll help release moisture between the metal foot and the rubber pad to prevent your jack feet from corroding. It is a very simple one time installation.
All you need to do is line your pad up here beneath the jack foot, lower that foot until the pad goes in here and the lips on all four sides, engage and lock the pad into place. What's nice about this is once it's installed there's no need to remove and replace your pads every time or carry other jack pads or blocks around with you. These will just stay attached to the jack foot pad. This part is made in the USA. Again, this is for a quantity of one pad.
Weight on this pad is only about two pounds. And again, the application it's for travel trailers that have the Lippert Level Up leveling jacks. And again, with either the 5 inch to 5 inch square foot pad. But that should do it for the review on the replacement pad for the SnapPad XTRA Square 5 jack pad system..
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
Ratings & Reviews
Nick S.
11/17/2025
I am glad they are working well for you once you were able to get them figured out! What kind of 5th wheel did you end up getting? New trailers are always exciting.
Angie
10/6/2025
Still love our snap pads. They add stability. Have not had an issue with them coming off at all. Highly recommend!
Thomas
7/28/2026
No issues, the SnapPads are holding up well and doing exactly what I bought them for. I recommend them for RVs. Happy with the purchase.
Kate F.
7/28/2026
James
7/2/2026
The pads are working great. A couple of tips: 1 If we are parked on a paved surface concrete and asphalt, before setting the leveling system in motion, I use a DeWalt battery blower to blow any loose rocks off the surfaces that the jacks will rest on. If were parked on dirt or grass, or on crushed rock or gravel, I use the hard plastic stackable blocks under the pads, like I used to use before installing the snap pads. Putting weight on the snap pads on surfaces with loose rock will imbed rocks in the underside of the pads. Since our TT is stored inside a garage with a concrete floor, I did not want rocks scarring up the concrete. Yes, I am picky, but after a while, the undersides of the pads would truly be mostly imbedded rocks if the pads were set down on ground or gravel.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Christopher H.
8/25/2026
Thanks for sharing Ickes and really appreciate the photo!