Hey Ron, congratulations on the new trailer! I have a Jay Feather myself and love it. You're definitely off to a great start with a weight distribution hitch, it will make a world of difference towing that trailer with your F-150. The Weigh Safe…
...I’m trying to determine the correct snap pad to use on this scissors Jack. They are on a 2024 Grand Design Momentum 22MAV. There are no brand names on the Jack. I have attached pictures of the only...
Hello Kate F, I too am a Kate F =) Yes, the Valterra #SS01 Sewer Solution can definitely work off-grid, but there are a few things to keep in mind to make sure it works well in your setup. The great thing about this system is that it doesn’t need…
Hey Darla, the correct MORryde X-factor for trailers that have a MORryde CRE3000 kit installed is the standard kit part #MR33WR. Running three of these would give you the most stable setup so that would be what I would recommend.
Gerald, the 12-ton Tallboy #PM94FR weighs about 37 lbs all-in, including the base plate, extensions, and carry bag. It’s a little heavy, but that’s the tradeoff for stability and steel construction - the 9-1/2 inch base plate and solid risers are…
Hey Mitchell, yes the Valterra StayPut Tandem Trailer Tire Changing Ramp #VAL68MB that you referenced will work with the Curt independent suspension you have and will still lift the trailer wheels up high enough to allow you to change it. How do you…
...Hey Nelson, since your jack feet are 7-3/4 inch in diameter the correct size SnapPad would be the part # SP34FR which is the 8 inch size. The 1/4 inch difference wouldn't cause any issues...
Good thinking, Andy good name btw. The Watchdog Surge Protector / Voltage Booster 50A #HU74ZR is a hefty unit, but it does sit outside at the pedestal, so security matters. It has a metal loop built in for a padlock or cable lock, which you can run…
Brian, you’ll each want the version that matches your RV’s service. The #HU84ZR is built for 30A rigs like your friend’s Cougar, while the #HU74ZR is made for 50A rigs like your Cedar Creek. They both do the same job - voltage boosting, surge…
Hey Colton, thanks for reaching out! The correct replacement bearing kit for your 5,200 lb axle is the Bearing Kit #BK3-300. I was able to have my contact at Dexter Axle cross-reference these parts to make sure that's what came with your axle.…
Hey Jeffrey! the overall height of the Roadmaster Dual Hitch Receiver Adapter #RM68BQ is 11-1/4". The distance from the hitch pin hole to the top receiver hitch pin hole is 8-1/4". I attached a picture the full dimensions below. What are…
Hey Ron, congratulations on the new trailer! I have a Jay Feather myself and love it. You're definitely off to a great start with a weight distribution hitch, it will make a world of difference towing that trailer with your F-150. The Weigh Safe…
...I’m trying to determine the correct snap pad to use on this scissors Jack. They are on a 2024 Grand Design Momentum 22MAV. There are no brand names on the Jack. I have attached pictures of the only...
Hello Kate F, I too am a Kate F =) Yes, the Valterra #SS01 Sewer Solution can definitely work off-grid, but there are a few things to keep in mind to make sure it works well in your setup. The great thing about this system is that it doesn’t need…
Hey Darla, the correct MORryde X-factor for trailers that have a MORryde CRE3000 kit installed is the standard kit part #MR33WR. Running three of these would give you the most stable setup so that would be what I would recommend.
Gerald, the 12-ton Tallboy #PM94FR weighs about 37 lbs all-in, including the base plate, extensions, and carry bag. It’s a little heavy, but that’s the tradeoff for stability and steel construction - the 9-1/2 inch base plate and solid risers are…
Hey Mitchell, yes the Valterra StayPut Tandem Trailer Tire Changing Ramp #VAL68MB that you referenced will work with the Curt independent suspension you have and will still lift the trailer wheels up high enough to allow you to change it. How do you…
...Hey Nelson, since your jack feet are 7-3/4 inch in diameter the correct size SnapPad would be the part # SP34FR which is the 8 inch size. The 1/4 inch difference wouldn't cause any issues...
Good thinking, Andy good name btw. The Watchdog Surge Protector / Voltage Booster 50A #HU74ZR is a hefty unit, but it does sit outside at the pedestal, so security matters. It has a metal loop built in for a padlock or cable lock, which you can run…
Brian, you’ll each want the version that matches your RV’s service. The #HU84ZR is built for 30A rigs like your friend’s Cougar, while the #HU74ZR is made for 50A rigs like your Cedar Creek. They both do the same job - voltage boosting, surge…
Hey Colton, thanks for reaching out! The correct replacement bearing kit for your 5,200 lb axle is the Bearing Kit #BK3-300. I was able to have my contact at Dexter Axle cross-reference these parts to make sure that's what came with your axle.…
Hey Jeffrey! the overall height of the Roadmaster Dual Hitch Receiver Adapter #RM68BQ is 11-1/4". The distance from the hitch pin hole to the top receiver hitch pin hole is 8-1/4". I attached a picture the full dimensions below. What are…
WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!
SnapPad's 1 Jack Pad offers a reliable solution for RV enthusiasts seeking stability and convenience. Designed for permanent attachment, these pads enhance weight distribution and provide a larger footprint, making them ideal for various terrains. Perfect for those who value ease of use and durability.
SnapPad's 1 Jack Pad increases the contact area with the ground, providing better weight distribution and reducing movement when setting up or tearing down camp. This larger footprint is especially beneficial on uneven or soft surfaces, ensuring your RV remains stable.
To install SnapPad's 1 Jack Pad, apply a bit of dish soap to the pad's edge for easier fitting. While it might not snap on immediately, a little patience and pressure will secure it in place. Once installed, it stays put, saving you from frequent adjustments.
Yes, SnapPad's 1 Jack Pad is versatile, performing well on gravel, dirt, and even soft surfaces. It prevents the metal jack plate from sinking or slipping, offering a more secure base. For sloped grounds, consider additional support like wood blocks for extra stability.
SnapPad's 1 Jack Pad reduces ground clearance by about an inch, which might cause dragging on steep curbs. To mitigate this, some recommend shaving the rear pads slightly. Despite this, the benefits of stability and ease of use often outweigh the clearance reduction.
Absolutely! SnapPad's 1 Jack Pad is designed for durability and permanent attachment, eliminating the need for frequent replacements. Its robust construction withstands various conditions, making it a reliable choice for long-term RV use.
Filters
