Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 8" square jack foot.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this SnapPad replacement pad. This is going to replace one of the pads for your SnapPad EQ Stable jack pads for your Equalizer leveling systems with the eight inch square jack feet. So, if one of your pads has become lost or damaged, you needing to replace it so that everything is gonna be level again, this is gonna be an exact replacement for that original set, so it's gonna have all the same features, dimensions, and everything as the original. It is going to be for your eight inch jack feet.
So, you can see there, overall diameter is right about 11 1/2 inches. And same very sturdy rubber finish, so it's gonna help protect the concrete or anything that your feet are put on. It's gonna help protect your feet from rocks and that sort of thing. It's also going to help increase the surface area, so that your feet aren't going to sink into soft ground and that sort of thing. So, all the same features as the original.
So, if you are missing one for your set, this is gonna be exactly what you need. This is made here in the USA, so you can trust it's made to the high quality standards that we've come to know and trust for products that are made here in the US. So, if you are needing to complete your set, this is gonna be exactly what you need. That's gonna complete our look for today. Again, I'm Michael with etrailer.com.
Thanks for watching..
Customer Satisfaction Score:
86% were satisfied with this product
14% of customers were not satisfied
Ratings & Reviews
The scale that I ordered it with has a 6” base plate. The snap pad was for 5-1/2” base plate. I just put the snap pad on my stock foot on my trailer which is 5-1/2”
The SnapPad works as advertised, they stay securely to the jack foot if properly attached. I used dish soap to help secure the pad to the jack foot.
Single snap pad; matches the other three and fit as expected. I like Snap Pads so I didn’t hesitate when I lost one on the road to get another. I also like ordering from etrailer as the product arrives in a timely manner and with good communication. Prior to my recent trip I purchased a new Blue Ox replacement tow bar from etrailer and it too arrived quickly and performed well.
Product arrived well packaged - just took a little longer for delivery than expected (a week) but I had also selected the free shipping option. I do love being able to track the package along it's route and also see which team member was responsible for which process. I can always trust e-Trailer.
I already installed a set of Snap Pads on my trailer, they are awesome, just needed to put one on the tongue jack and now I'm all set. They are a "Snap" to install, pun intended.
Perfect for my electric ack on my trailer. Heavy duty and snapped right on. Every experience I have had with Etrailer has been a great experience. I love buying from them.
Great addition to my jacks. No sinking into hot asphalt or soft ground. No bending the jack bases on rocks. No scraping surfaces under the jacks. No concerns about sliding. Relatively inexpensive and appear as though they'll last forever....
We use this as a base for the nose wheel on our 18' trailer, to keep it from digging in on soft surfaces. And also to help the wheel chocks on downward facing sites: the wheel sits in the hole in the middle, and won't move.
Saw these advertised on YouTube and purchased one for the tongue jack on our travel trailer. Works great to increase the footprint and provide a more sure grip on the ground. Very easy install with a bit of dish soap as instructed.
Definite addition to the upgrade that I made increasing from 9” landing jack feet to 12” landing jack feet on our diesel pusher motorhome. These 12” snap pads will allow me to distribute load better over soft ground and not punch holes in the gravel or soft sites. Plus if I need to add blocks under feet, there will be no worrying about movement of jack feet off of the blocks.
The Snap Pad Jack Pad fits the round foot plate on our FIC electric tongue jack perfectly. It provides additional friction where the foot plate sits to reduce any movement of the trailer tongue.
Snap Jack pads went on smoothly with a little help from a soapy solution I sprayed on before applying the weight of our new Dutchstar MH. All fit perfectly.
Good quality construction with thick dense durable rubber. I bought this item for the foot of my RV tongue jack because I noticed the metal jack foot slipping on the jack support as I was lowering my RV. I have yet to test this product but the concept isn’t rocket science so I’m sure I’ll be pleased.
Good sturdy product that in my opinion is worth the money.
I ordered a replacement snap pad for my 2025 thor Hurricane which has a lippert leveling system. I installed the pad and made sure it was secure. I raised the jacks and drove 2 miles to my storage site. When I went to move my camper I noticed the newly installed pad was gone. I like the pads but due to cost and reliability I won't be purchasing snap pads again
A great product. Saves a lot of time, not having to set up and position wooden or plastic blocks. I also have the square snap on pads for my stabilizer feet on my RV. However, because these are so good and expensive, for extra security I strapped all of them on with long 36” black cable ties, threading them through the “drain slots” on the pads. Works great and I’m not worried about them coming off as I’m driving down the road! Maybe not necessary, but being extra careful! : )ETRAILER has been great to work with.
My wife and I purchased our first RV over 50 years ago before we were even married. We have purchased many after market items for the eight RV's we've owned. These Snap Pads are the single best $ we have ever spent! Period. What a magic delight to pull up to a spot (we are almost 100% boondockers) push the button on my left to auto level our coach and not have to get out to check the surface and then slide in boards for the leveling jacks to go down on. The Snap Pads give me total confidence that all is good without getting out of the driver's seat. Best investment I've ever made in an after market product!!! The video that etrailer has for the product where people are so positive about Snap Pads is RIGHT ON!
Item arrived super fast. Couldn’t wait to install, the weather outside is not really great for it but went for it anyway. Just as the directions saw, apply a little dish soap, and it didn’t snap on right away but after a few minutes it slide into place! Fit is perfect and I think it’s going to do exactly what I want it to do! I would definitely recommend this item.
After aligning with leveling plates I had no problem with them snapping into place. Because my 9 inch plates were 4 years old and one was bent badly I replaced the plates with new ones first. These snap pads are so precise I didn't want to take a chance of them not snapping into place with a dished or bent plate. They worked out great and will help prevent damage to the new plates. I love them.
PERFECT
Had to modify my 8” jack Ft to utilize the pads; 12” was perfect!!
Great company to work with and very efficient in getting my parts to me very quick!
Have not installed but They arrived right on time as expected.
Do you have a question about this RV Jack Pad?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.