Replacement Mounting Brackets For HappiJac Electric Truck Camper Jack System

Updated 07/10/2025 | Published 11/04/2023

Products Featured in This Question

HappiJac Electric Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs

(17)

$3920.85

Replacement L-Bracket for HappiJac Truck Camper Jacks - 16" Tall - Qty 1

(10)

$30.53

Replacement Flat Bracket for HappiJac Truck Camper Jacks - 16" Tall - Qty 1

(12)

$33.08

Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems - Qty 2

(143)

$320.02

Question:

I have the jacks in LC736514-ELKIT and the bracket that attaches the jack to the camper is bent, causing the jack to lean outwards. I would like to replace the bracket the jack is fine - do you sell the brackets separately?

asked by: David N

Expert Reply:

If you're looking for just the L-bracket for your HappiJac Electric Truck Camper Jack System # LC736514-ELKIT then you'll need part # LC182492. The flat bracket can be swapped out with part # LC182494 and the swing brackets can be replaced with part # LC182496.

expert reply by: Kevin C

HappiJac Electric Truck Camper Jack System Mounting Brackets
(click to enlarge)

Ryan D.

7/3/2025

Hey! I have an Adventurer import camper that i bought for my 2021 Ranger. Turns out its not ideal for it and i want to use my camper on a 99 Silverado. Problem is my Happijacs on the front of my camper are not wide enough for the Chev to fit under. I looked at the extension brackets but my jack brackets are set up North/South instead of the east/west on my camper. Im confused as to what ill need with the parts listed on the site. Ive seen the L brackets but im assuming they are replacements for the original brackets, not an extention. Help! Lol

Jon G.

7/3/2025

@RyanD Hey! I'm definitely going to help you out with this, but I'm a little confused on what you mean by the brackets being set up for North/South instead of East/West. If you could elaborate, I'll see if we have a solution for you!

Ryan D.

7/3/2025

@JonG Hi so when you look at my jacks on the front of the camper the jack brackets are in two pieces. Ones flat and one is the L shape bracket. ——- they go this way and with jack bolted on the jack sits just to the right of the right bracket and left of the left jack. Its 77 inches inbetween jacks. My Chev is 80 in but i would need at least ( in my opinion) 5 inches on each side. I need the extension to go I I I I v This way. I cant seem to send a pic so thats the only way i can send it. I bought some plates from another company locally but adding them only makes them go out farther this way ———————>

Jon G.

7/9/2025

@RyanD I had sent you an email asking for some photos, but after looking at the question a bit, I get what you mean (I believe, anyways). It sounds like you're needing the 6" Lift Extenders # LC182495 for your HappiJac system, as opposed to the ones mentioned above that extend out wider. Hopefully this takes care of your problem!