Availability of Longer 2-1/2" Shank for ReCurve R3 Weight Distribution Hitch  

Hey Rob, I’d be wondering the same thing if I came across a ball mount made out of aluminum like the #BPH77MR while researching. Totally fair question. That said, I haven’t seen any noticeable difference in slop or wear compared to their steel…

I would be happy to recommend the correct weight distribution shank for your Reese weight distribution hitch, but with out knowing the exact system you have there are two different shank styles, so you will want to pick the one that matches your…

Hello Tony, thanks for reaching out. We do have the parts you need for your Fastway e2 Weight Distribution Hitch #FA92-00-1000. It sounds like you are needing a new head unit and hardware, or possibly a new shank. I will list the parts for you below:…

The Replacement Head for Fastway e2 Weight Distribution Systems item #FA92-02-1255 is an original Fastway part that comes off the same line as the head's sold in the full weight distribution system. This is the same with all of Fastway's…

Hello Rebecca, Thanks for writing in! I’m sorry to hear your pump gave out on your trip, I hope you were still able to enjoy your time. I don’t have a database that shows exactly what components are installed on each specific trailer, but based on my…

Good news, I can help. Your year and model of Ford truck was made with two styles of connectors when they were being wired in at the factory. This means you will need to look at your factory 7-way under you vehicle and see if the back of the 7-way…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…