Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Torx flathead screws make securing a wood floor to your trailer quick, easy and economical with a 1/4" diameter and type F points for heavy-gauge sheet metal, aluminum, cast iron and zinc. Forty per package.
Features:
Specs:
TF01-250, Screw, Floor Torx Head 1/4" x 2 1/2", 40/pkg
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Michael: Hi there. I'm Michael with etrailer.com. Today, we're going to take a quick look at the two and a half inch long Torx floor screws. These floor screws are going to allow you to re deck your trailer. These are almost identical to a lot of the screws that are used from trailer manufacturers, so it's a good chance that you might not even need to drill a new pilot hole for these when you're putting your new decking on. It might attach to the frame just as they are, so a great option for you there.
These screws do have a tapered head so that they will sit flush with the surface. The end of the screw is an F point and it's a blunt end to help to cut through multiple kinds of surface, including heavy gauge sheet metal, aluminum, and cast iron as well as zinc. So depending on what type of material you have, it should do a good job for you. These are right at two and a half inches of total length, you can see they're only about one quarter inch diameter. You are going to have 21 threads per inch, and it is going to require a 7/32 inch pilot hole.These are going to be a great option for you if you're redoing your deck.
If you don't already have one, I would recommend picking up a Torx head screwdriver bit. You can find that here at etrailer.com using the part number you see on the screen there, just to make sure that it's easy for you to drill these in place. You are going to get 40 of these screws with each package, so depending on how large your trailer is, how many boards you're putting down would determine how many screws that you'll need. But overall, I think these are going to do a great job allowing you to put those new boards down so that your trailer seems fresh and ready to go, ready to haul more material for a long time to come. So that's going to complete our look for today.
Again, I'm Michael with etrailer.com. Thanks for watching..
These are perfect for securely attaching wood/decking to angle iron. With a 1/4" predrilled hole, they easily self tap. Counter sink the hole for a clean, flush finish.
Great Product + Great Advice + Fast Delivery = Excellent Project Experience.
I bought Deck Screws, Tail Lights and wiring harness.
My only issue was I needed more wire to wire the marker lights and the brakes.
I spoke with Naomi and she helped me immensely. I sort of knew what I wanted and she helped me fill in the voids in my information and had the product I needed. She followed up with an extremely helpful page about specifics on the product. Great job Naomi!
Gwendolyn Y.
4/27/2025
Hey Luis! I'm glad that Naomi helped fill the gaps for ya. What kind of project are you working on?
I decided to completely put a new wood floor in my 22 foot slant-load gooseneck horse trailer. The old wood was rotten in many places and I had to remove or cutoff the old screws (they were self-tapping screws). I needed to put down 2x8 treated wood onto the frame and then fasten with new screws. I searched for replacements and came across these. Just the right length to go through the wood and angle iron frame. Just pre-drill the holes using the correct size drill bit and then use the correct size torx bit to fasten them down with a drill. You can probably find the drill bit to use on the description on etrailer and/or with the package of screws. Be sure to use the correct size for the hole. These are much better than self-tapping. I included a picture of the trailer and a picture of the wood floor so you have an idea.
The item shows shipped same day BUT ONLY shipping label via USPS created. Item did not ship for 2 days later. Plan on 7 days when ordering.
I purchased these deck screws to replace the worn out deck on my utility trailer. They are the exact replacement screws for what was used when the trailer was built. After removing the old deck and fighting the old screws out, some I hade to drill out. I ended up using all of the original holes with no new holes needed. They are 100% quality and worked great. Helped me put new life in my 11 year old trailer. Time to go back to work for another 11 years!
Review of Redline 2-1/2 Torx Trailer Floor Screws - TF01250
I have installed 73 of these screws into the flange of 3" C channel.
75 screws, none have twisted off or not tap the pre-drilled holes.
Driving the screws with a Milwaukee 2757-20 Impact Driver.
I must be putting in more screws in than the original installation of the deck, I will be ordering more to finish this job.
As long as etrailer uses this vendor, these screws will not disappoint!!
Working as designed
Very bad experience. Placed an order on 5-24-23 for an item that showed to be in stock on the website. Receive an email stating that is back ordered and due to ship 6-5-23, several emails later still no wiring harness. Finally 7-10-23 I receive an empty envelope, well not completely empty it has a letter from USPS stating that the enclosed was found loose in the mail. A box would have been more appropriate to ship this item, as I have been in shipping for two different companies for 38 years now. I am unable to upload pictures of the envelope, I will send them via email.
etrailer is my go-to supplier for anything I need for our 7 equipment trailers. Recently I decided to re-floor our 20 ft flatbed gooseneck trailer and etrailer had the special fasteners I needed for the KDAT material I wanted to use. Ordered 2 bags of these screws and 3 days later they were delivered. Great selection of products, great customer service, super prices, and quick delivery. What more could you ask for?
Product works great, and secures the wooden deck to the frame of the trailer without having to pre-bore holes.
Tom A. 
10/13/2017
Outstanding, the screws have really worked out well. They went down easily and have held well over the year.
I get all of my trailer needs from etrailer.com. I don't bother searching for the things I need because eTrailer.com always has it and at a good price with quick shipping.
Recently replaced the floor on my 20 foot flat bed trailer and needed the special screws that work with pressure treated lumber. etrailer.com had exactly what I needed plus help in selecting the right screw for KDAT material.
Order came in promptly and will post a review as soon as I use them
I put a new deck on my trailer! The frame is aluminum and these screws worked perfectly once you drill the pilot hole. I put in 120 screws and they pulled the boards down tight and not one of them stripped out on me. Well worth the cost !
Worked well securing deck to trailer.
Tj
3/21/2023
Great
Very pleased with purchase and easy use of website. And the added information for wiring harnesses.
Good quality product. I had questions on the installation of the trailer floor screws and received excellent help from them. All my questions were answered and the installation went great.
Product was Exactly as described plus came in a timely manner also as stated. Not my first order with etrailer every time was pleased with transaction.
We used these trailer screws to redeck our boat slip. Worked by well. We are return customers to etrailer and will continue to place orders with them.
i order'd torx screw's for one of my heavy trailers and exactly what i needed and wanted showed up a few day's later. Thank You.
matching exactly with what I have on my trailer. Website was clear and product came when they said it would. No complaints. Will shop here again
These are exactly what I ordered unfortunately the package came open inside the shipping box and a few of the screws where lost but overall a good product and a good company
perfect replacement for the rusted old ones
The perfect screw for trailer...used 2x8 neat professional look
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Jayb240
11/4/2014
Trailer rebuild has been working fine.My only issue is the center marker lights are a plasticHousing that broke. I have seen trucker lite bars thatAppear to be the solution.