Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF11X35W (Pair)

Ask the Experts about this Redline Accessories and Parts
Do you have a question about this Accessories and Part?

• Dimension of Mounting Hole on Redline Trailer Fender # PF11X35W
  
• I was able to go out to the warehouse and measure the mounting brackets holes for the PF11X35W and found that it was 5-5/16 inches or 5.3125 inches. If these aren't an exact match, new holes can usually be drilled into the brackets to make them compatible. The recommended bracket for this fender is the # PF1135-BKT, this bracket works well for mounting fenders to a boat or other open sided trailer. The brackets use u-bolts to attach to the trailer frame and then the fenders mount to...
  view full answer...


• Availability of Mounting Brackets for Fulton # F008595-2 Fenders
  
• We do indeed have brackets that would work for the Fulton # F008595-2 fenders, part # PF1135-BKT-2. Each set includes two brackets. I've provided a photo showing how the brackets work.
  view full answer...


• Recommended Plastic Fender for 14 Inch Wheel and Tail Lights
  
• We have white plastic fenders that will fit your 14 inch wheel. I recommend the Plastic, Single-Axle Trailer Fender w/ Top and Side Steps # PF11X35W. If you want matching fenders, then you want # PF11X35W-2. If you need the mounting brackets, I recommend the Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender # PF1135-BKT-2. These don't have the integrated lights, but trailer lights are an easy addition. I recommend the Miro-Flex LED Trailer Tail Lights...
  view full answer...


• Availability of Mounting Brackets for Fulton Trailer Fender # F008572
  
• Although not an exact match, the part # PF1135-BKT-2 brackets would work well for mounting the fenders onto a boat or other open sided trailer. The brackets use U-bolts that attach to the trailer frame, the fenders then mount to the brackets as shown in the photo I provided. The holes in the bracket do not match up with the mounting holes in the fender, but new holes could easily be added to the bracket. The brackets are sold two to a set. For two fenders, you would need two sets.
  view full answer...


• Mounting Fenders for 1997 Shorelander Boat Trailer
  
• The fender you mentioned, part # F008564 does not have a specific mounting bracket. The bracket needed will depend on your trailer frame and where the fender would sit on the trailer. You might even be able to re use your existing brackets. To see all of our fender mounting brackets, click on the provided link. We do have fender designed for a 14 inch wheel with mounting system that works very well. Take a look at part # F008594-2 and bracket # PF1135-BKT-2 (two brackets needed per...
  view full answer...


• Brackets for Attaching the Fulton Plastic Fender with Top Step # F008549
  
• Attachment of the fenders to your trailer will depend on your trailer construction. We have several styles of galvanized brackets that you can use to attach fenders to a trailer frame. We have L brackets like the Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender, item # PF775-BKT-2, and we have galvanized U-brackets like the Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender, item # PF1135-BKT-2. One of these styles should work for...
  view full answer...


• Best Type of Trailer Fender for Boat Trailer with 15 Inch Diameter Wheels
  
• I have attached a list of our trailer fenders that will work with 15" diameter wheels for you below. However, as you have a boat trailer that will frequently be subjected to water I recommend going with a plastic fender like the Fulton Single Axle Trailer Fenders part # F008595-2 for silver, part # F008585-2 for black, or part # F008575-2 for white. A plastic trailer fender will not run the risk of rusting out like a steel fender will. If you do not already have mounting brackets then...
  view full answer...


• Hardware for Redline Bolt-On Trailer Fender Brackets
  
• We don't offer bolts that fit the bracket perfectly that will fit around your rather tall trailer frame. If it's not a boat trailer, you might be able to use the # 382385UB U-bolts. The bolts are 5-1/4 inches long, so they'd be tall enough to fit around your trailer frame, but they span 2-3/8 inches, so you'd need to drill a hole in the bracket to accommodate the U-bolt. If it's a boat trailer, or you'd rather not drill holes in the bracket, you'd probably want to use a galvanized U-bolt...
  view full answer...


• Will the Fulton Single Axle Trailer Fender # F008572 fit a Karavan Trailer for PWC
  
• If you have 12 inch wheels on your Karavan PWC trailer then yes, the Fulton Single Axle Trailer Fender # F008572 would work for you. The distance between the mounting brackets will need to be 22.7 inches to match up to this fender. You might also be interested in purchasing the Galvanized Steel, U-Shaped, Bolt-On Brackets # PF1135-BKT-2 to make the installation easier.
  view full answer...


• Do the Fulton Plastic Trailer Fenders Come with Mounting Brackets
  
• For the Fulton trailer fenders like # F008574 you would need to use your own mounting brackets/hardware because there is no one set way to mount the fenders. You may be able to just modify your existing brackets. These fenders have a cutout in the back, see picture, on each side to allow for brackets. Or you may be able to use mounting brackets # PF1135-BKT-2.
  view full answer...


• Does the Fulton Single Axle Trailer Fender # F008583 Fit Both Sides of Trailer
  
• The Fulton Single Axle Trailer Fender # F008583 that you referenced can fit either the left or the right side. It's actually totally symmetrical meaning it would not favor one side of the trailer over the other at all. For brackets you could use the # PF1135-BKT-2 for mounting them.
  view full answer...


• Looking for Replacement Fenders for 1999 Spartan Boat Trailer
  
• I don't have a fender that exactly matches the dimensions you provided, but the Fulton fender, # F008583 for black, # F008573 for white and # F008593 for silver come pretty close. The fender is 9 inches wide, 12 inches tall and 40 inches long, as you can see in the provided diagram. Each fender would attach to the trailer using the # PF1135-BKT-2 brackets, which includes two brackets. For two fenders, you'd need two sets of brackets.
  view full answer...


• Fit & Compatibility of Redline 15 Inch Trailer Fenders for Load Rite Boat Trailer w/15 Inch Tires
  
• The Redline Trailer Fenders # PF11X35W-2 you were looking at, are designed to fit 15 inch tires. However they are not specifically designed for particular trailers. The best thing for you to do is to compare the dimensions and mounting dimensions to the ones on your Load Rite boat trailer initially. The distance between the mounting slots is 35 inches measured from the inside and 41-1/2 inches measured from the outside of the slot. I have linked the above mentioned product to...
  view full answer...


• Dimensions of the Mounting Slots of the Single Axle Trailer Fenders # PF11X35W-2
  
• I went and pulled a Single Axle Trailer Fender # PF11X35W-2 from our warehouse and found that the distance between the mounting slots is 35 inches measured from the inside and 41-1/2 inches measured from the outside of the slot. For brackets you may be interested in the Galvanized Steel, U-Shaped, Bolt-On Brackets # PF1135-BKT-2.
  view full answer...


• Fender Bracket Recommendation for Use with the Fulton Fender part # F008573
  
• Fulton does not provide mounting bracket kits for the fenders. You can use your fenders original mounting brackets or use L brackets to mount the fender to your trailers frame. Although not an exact match, the part # PF1135-BKT-2 brackets would work well for mounting the fenders. The brackets use U-bolts that attach to the trailer frame, the fenders then mount to the brackets as shown in the photo I provided. The holes in the bracket do not match up with the mounting holes in the fender,...
  view full answer...


• Can the Fulton Plastic Fender with Top and Side Steps be Stood On and Support 220 lbs.
  
• The Fulton Plastic Fender with Top and Side Steps, # F008582, have molded in steps on each end and the top of the fender and are designed to be stepped on as long as the mounting hardware used is capable of supporting the weight that will be required. This fender can be mounted with your existing hardware, if compatible, or with custom brackets that are designed specifically for the trailer frame on which they are to be installed. We have a couple of fender mounting brackets that...
  view full answer...


• Availability of 13 Inch SIngle Axle Trailer Fender
  
• Yes, take a look at Fulton Single Axle Trailer Fender with Top and Side Steps # F008593. The fender is 9 inches wide, 12 inches tall and 40 inches long. Each fender would attach to the trailer using the # PF1135-BKT-2 brackets, which includes two brackets. For two fenders, you'd need two sets of brackets. I have included a video review of this fender for you to check out.
  view full answer...


• Will Fulton Single Axle Trailer Fender Work With Larger 13-Inch Tires On 1994 Shorelander Trailer
  
• The Fulton Single Axle Trailer Fender, part # F008573 is designed to work with 13-inch wheels so it will work with St175/80D13 tires like part # AM10210 or part # AM1ST77. To install these fenders you may be able to modify and use the hardware you have on your trailer. Since there is not one specific way to install trailer fenders you can choose the best option and hardware that works for you. We have see fenders mounted with L-brackets like part # CE26098G-2, or Galvanized U-Shaped...
  view full answer...

Do you have a question about this Accessories and Part?