bing tracking image
  1. Weight Distribution Hitch
  2. CURT
  3. 1100 lbs
  4. 1200 lbs
  5. 1300 lbs
  6. 1400 lbs
Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K GTW, 1.5K TW

Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K GTW, 1.5K TW

Item # C17422
Retail:$681.95
Our Price: $442.82
You Save: $239.13
Weight Distribution Hitch
Shipping Weight: 109 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
The best technical support and full weight distribution hitch installation instructions. Great price Quicksilver TT Toy Hauler weight distribution hitch and expert service. Livin Lite Quicksilver TT Toy Hauler, 2018 weight distribution hitch by CURT are available from etrailer.com. For expert service call 1-800-940-8924 to order your Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K GTW, 1.5K TW part number C17422, or order online at etrailer.com.
  • All Info
  • Reviews (96)
  • Q & A (0)
  • Photos

CURT Weight Distribution Hitch - C17422

  • 1100 lbs
  • 1200 lbs
  • 1300 lbs
  • 1400 lbs
  • Fits 2 Inch Hitch
  • WD With Sway Control
  • Does Not Allow Backing Up
  • CURT
  • Electric Brake Compatible
  • No Sway

This weight-distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Shank and pre-attached, pre-torqued 2-5/16" ball included.


Features:

  • Evenly distributes weight over axles of tow vehicle and trailer for stability and control
    • Creates a more level ride for both tow vehicle and trailer
  • Friction sway control reduces sway caused by winds, curving roads and sudden maneuvers
    • Adjustable tension lets you create the perfect degree of control and resistance
    • Integrated handle engages and disengages the system
    • Removable - just release 2 spring locking pins
  • Trunnion spring bars are constructed of solid, forged steel for strength and durability
    • Bars are shorter than those in standard systems to accommodate your short-tongue trailer
  • Adjustable spring-bar tension - just switch links in lift chains to fine-tune
  • Desired tilt is achieved with traditional washer design
    • Add or remove washers from spacer rivet to tilt head up or down
  • Powder coated steel resists corrosion
  • Snap-up lever eases installation by reducing lifting required by trailer jack
  • System includes head assembly, adjustable shank, 2-5/16" hitch ball with 1-1/4" diameter shank, sway control bar, spring bars, lift brackets and chains, snap-up handle, pin and clip, and all necessary hardware


Specs:

  • Tongue weight: 1,000 -1,500 lbs
  • Gross towing weight: 10,000 - 15,000 lbs
  • Application: 2" x 2" trailer hitch receivers rated for use with weight-distribution systems
  • Shank length: 12"
  • Maximum drop: 1/2"
  • Maximum rise: 7-1/2"
  • Spring-bar length: 28-3/8"
  • 1-Year limited warranty


Note: Will only work with overslung couplers.


Included w/ C17422Optional Add-Ons
  • Adjustable Shank
  • System Head
  • Lift Brackets
  • Spring Bars
  • Bar-Style Friction Sway Control
  • 2-5/16" Hitch Ball w/ 1-1/4" Diameter Shank
  • 2" Hitch Ball w/ 1-1/4" Diameter Shank

Weight Distributing Hitch

Create a stable ride for your tow vehicle and trailer with a weight-distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.


Selecting a Weight-Distribution System

The tongue weight rating is the most important factor in determining which size weight-distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.


To determine the proper weight rating for a weight-distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight-distribution system.



17422 Curt Weight Distribution Hitch - Trunnion

Installation Details C17422 Installation instructions

Customer Satisfaction Score:


Customer Reviews

Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K GTW, 1.5K TW - C17422

Average Customer Rating:  4.7 out of 5 stars   (96 Customer Reviews)

This weight-distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Shank and pre-attached, pre-torqued 2-5/16" ball included.

by:

Well, where do I start? First of all etrailer did not place the correct address on my shipment. They left out two very important lines. Secondly I had to call to get a copy of my invoice. They didn’t send it at the time of my order. Good thing I took a picture of the order number.
Next? Changing or adding to an address with UPS while the package is being shipped? Impossible! So I took the tracking number to the loading facility of my location 75 miles away and the super cool driver supervisor at UPS took my information and made sure I received my shipment.

Now… yes it arrived but like I’ve seen in many reviews the box was a mess! It has at least a roll or two of packing tape all over it to keep it together. I don’t know yet if I’m missing any parts. I won’t have time to look till next week. I can not imagine UPS would accept a box in this condition so I’m pretty certain the damage happened in transit. Bottom line IMHO Curt manufacturing needs to be held to account for this. If you’re boxing up something that weighs 120 pounds make sure your packaging is up to the task.

Would I order from etrailer again? That remains to be seen. Am I happy with my purchase? Don’t know yet, I need to install it. In this case I’m broke down in the middle of nowhere with a broken hitch that was supplied with my trailer that is very possibly too light for the trailer.

The saga continues! If all goes well with the install and the operation of the hitch then I’ll be happy. Just a BTW… I’ve seen reports that this hitch works fine till it breaks. Finding a bumper pull hitch for a 15,000 pound trailer is not as easy as one might think.

Etrailer Expert

Jenny N.

7/1/2023

I am very sorry that the weight distribution system arrived this way. I will have our Customer Service team reach out to you.



by:

This how the box showed up with just a couple of pieces left in it. Then they act like they are doing you a favor to replace it. Package it right before you ship it.

Etrailer Expert

Sierra K.

12/1/2021

I apologize for the inconvenience. Customer Service will be helping you with this issue.



by:

I’m using this hitch on a two axle 20 ft car hauler that has a bit too much tongue weight when carrying a full size pickup. It works perfectly for this & is quick & east to remove & install.

Ewen A.

4/27/2020

Very well



by:

Installed on horse trailer for stability with cab over while towing horse trailer.



by:

I had a fastway e2 trunnion 12k pound hitch and hated it. It was great if you didnt need much pressure on the bars and always hooked up while on flat even ground. Most times I had to use a 3 foot prybar to get the weight transfer bars off the trailer and a 3 foot cheater bar to get the bars on!!! This 15k pound hitch from curt is great!!!! The welds could be better (pretty picky I'm a fabricator by trade) but nothing beats this style hitch. It may take an extra step if you want the friction brake but it is worth it. I run 2 friction brakes as I have a 38ft travel trailer and is pretty much a giant sail. The trunnion hitch couldn't handle that camper in the wind and there wasnt a way to adjust the bars for a windy day. but this hitch with 2 brakes works great. Dont always need 2 brakes but I like the option for when its windy out and we have a 2 hour drive on the expressway!!!



by:

One year later, working great. Good quality. I didn't use the lift brackets because I have a race trailer that had them already welded on. Glad this system worked with the existing welded-on setup of my trailer. E-Trailer was great helping me figure that out among all the different styles available.



by:

This weight distribution system and sway bar made a world of difference hauling heavy loads in my Big Tex 7'x14' dump trailer. We have hauled many heavy loads long distances through the curvy Mountain roads of central Oregon. Definitely levels my F250 4x4 pickup/Big Tex-7'x14' dump trailer combination and prevents the scary sway that we experienced on our first trip. We found that even the occasional high winds we experienced on two trips did not create a problem. The peace of mind and safety for us was/is worth every penny of the very reasonable purchase price. I was unable to use the standard chain hangers that came with the distribution system because of the battery and pump box location. The optional bolt on chain hangers worked great for me.



by:

The delivery was bad.

Etrailer Expert

Jenny N.

4/27/2022

I will have our Customer Service team reach out to you.



by:

I received my knew curt distribution hitch the other day. The shipping time was fast, in fact faster than expected. I put the few parts together on the truck and was pleased with the quality. I bought a new trailer and my old system was a little under rated. The curt hitch should work fine.



by:

This is an outstanding weight distribution system. I am fully pleased with it. I use it for towing my 2016 Grand Design 327RLTS. The tongue weight is rated at 1150lbs. I am certain it's closer to 1450lbs, but for this system it's no problem at all. I have no complaints and for the price it was the best buy on the web. Thanks.



by:

Ridiculously fast shipping and a perfect price! Arrived in good condition. Installation instruction were simple to follow. The actual product information from CURT as to the specific dimension as an overall unit (i.e. mechanical drawing) would be helpful to determine if the product works correctly for your trailer. Enough was provided that I took a chance but we did have to raise my AC unit on the front of my trailer 2.5" and move one of it's support bars back in order to install the weight distribution system. Not at all any fault or any concern of Etrailer, but just wanted to share this note in case other have a propane rack or something else on their tongue.



by:

Ordered a weight distribution hitch with sway control. Hitch arrived on time and in good condition. Installation went well, and the hitch works perfectly. Very pleased.



by:

Great weight distribution hitch and sway control bar. Drove from Texas to Alaska with ease and no issue. Love this hitch



by:

I have done business with etrailer before and always have had excellent service. This particular time I had an issue with ordering and Troy was very helpful in resolving the problem and my Weight distribution hitch arrived two days later. I also had some questions which the experts at etrailer answered quickly.
I have installed the hitch but have not traveled with a loaded trailer but do not expect any issues.



by:

I purchased this to pull a small trailer with our 2014 Ford Explorer. I cannot express what an improvement this made in the handling characteristics.

I would never not use one again.



by:

Item was delivered had a minor issue with item Melissa from costumer service was the best at taking care of the problem. Very satisfied I have ordered from here in the past and will be using ETRAILER again Thank you Melissa for all your help .



by:

Your equipment is the best easy to install and looks good. Took all the movement out of the car trailer. I haul a 18 foot car trailer loaded to the max.



by:

Gr8 work and follow through. I had to cancel a order from JC whitley after being jerked around and I cancelled with them and and called you. U guys helped me out and got it done, thanks



by:

This item was easy to install took less than a hour. Made a huge difference pulling 33ft travel trailer. Leveled out truck and can pull at 70mph with little sway.



by:

Product is exactly as advertised. Complete and very easy to install by following the included instructions, and of course this all backed the impeccable customer service provided by etrailer and their customer service team !

Will continue to use etrailer for any and all towing needs.



by:

So far so good.. the instructions could be a little more thorough. Etrailer.com had awesome customer service..very quick delivery!



by:

This order was delivery today, thanks for your prompt delivery I will write back to you after we try the product so far is still in the box......as soon we work on it I would sent pictures and finish my review.....Thank you again



by:

Product arrived intact with all parts. No complaints with item, though have not used yet. Excellent support through etrailer.com.



by:

Product arrived sooner than I expected! Appears to be a well made product. I'll be installing it soon on my 24 Ft. Boles Aero trailer and testing it out.



by:

Received full product as described. Box arrived in rough shape but product is fine and complete. I am very happy.

Art L.

2/26/2019

Great


25
96
Show More Reviews

See what our Experts say about this CURT Weight Distribution Hitch

  • Where on Trailer's Frame do the Brackets of the Curt Short-Arm Weight Distribution System Install
    The spring bars of the Curt Short Arm Weight Distribution # C17422 are 28-3/8 inches long. So the brackets will be approximately that far from the hitch ball on your trailer's frame. You also want to find the exact tongue weight of your trailer when it's loaded. Then add that to any weight you've put behind the rear axle of your 2016 Ram 2500. You want that number to fall within the range the system is rated for. The Curt system is rated between 1,000 to 1,500 pounds of tongue weight....
    view full answer...
  • Can You Back Up with a Curt Weight Distribution System Installed
    With weight distribution systems like the Curt part # C17422 you can backup as long as you mainly are going straight back. If you find yourself in any jackknife situations you would need to disconnect the bars and the sway control unit. A good rule of thumb is that as long as you aren't ending up in a tighter turning situation that you could get yourself into going forward then you will be fine in reverse.
    view full answer...
  • How Are the Curt Short-Arm Weight Distribution System Spring Bars Measured
    The spring bars included with the Curt Short-Arm Weight Distribution System with Sway Control part # C17422 are actually 28-3/8" long. This measurement is taken from the end of each bar with the knuckle removed. The distance from the end of the bar to the center of the pin on the knuckle is going to be 28 5/8" which you can see in the attached photo. I called Curt to confirm this for you.
    view full answer...
    Image 1 for
  • Can You Reverse with the Curt Short-Arm 15K Weight Distribution System with Sway Control
    You can reverse with the Curt Short-Arm Weight Distribution System part # C17422 but you need to be sure you are not backing up at an angle. The system works using friction to stop the trailer from swaying so trying to reverse at an angle puts too much stress on this system and can cause damage. If you need to reverse at an angle simply unhook the spring bars and sway bar from the trailer. This will be the case for most weight distribution systems.
    view full answer...
  • Weight Distribution Hitch with Cargo Trailer That Weighs 10,000 lb When Fully Loaded
    Weight distribution has to be set up for each specific tongue weight the trailer will see. Best option for you might be to go with a system ideal for your loaded trailer tongue weight and then when unloaded just disconnect the bars. Otherwise you are going to spend a lot of time setting things back up. Actually it might even be in your best interest to do air bags on your tow vehicle instead since you'll be able to vary the air pressure as needed. For a system that would work well with...
    view full answer...
  • Can the Curt Weight Distribution System with Sway Control be Set Up to Allow Backing Up
    To be able to backup your trailer while the Curt Weight Distribution System with Sway Control, Trunnion Bar # C17422 is installed on the Yukon XL and the trailer, you will want to disengage the friction sway control bar. The sway control bar is the aspect of the system that requires the warning to not back up while the system in installed because it could be damaged in the process of backing up if the trailer were to turn too sharply. If you will need to execute a sharp turn while backing...
    view full answer...
  • 14K Replacement for Quality 750 Lb Weight Distribution System
    I do have an option for you but most weight distribution system spring bar capacities are not doubled as you put. Therefore, I recommend using the Curt Short-Arm Weight Distribution System with Sway Control part # C17422 which is rated up to 1,500 lbs of tongue weight. This system also has integrated sway control. Unfortunately, we have no replacement parts for the system you have now nor am I familiar with the manufacturer.
    view full answer...
  • Recommended Weight Distribution System for V-Nose Trailer
    The issue with adding a weight distribution system to your trailer is that there isn't a lot of room for installation due to the V-nose. But I may have a solution for you. To choose the properly rated system you need to find your total tongue weight. That is the tongue weight of the loaded and ready to tow trailer added to the weight stored behind your van's rear axle. Once you have that figure you'll also need to measure your trailer's tongue to find out how much space you have for...
    view full answer...
  • Why Can't You Back Up with Curt Weight Distribution System Installed
    You can back up a trailer with a weight distribution system installed on as long as you don't end up in too tight of a turn. This is especially true with the Curt Weight Distribution System part # C17422 as it has a friction sway control system as well. If you are backing up basically in a straight line you would be fine, but if you think you are going to get into a tight turn you would need to disconnect the spring bars and the friction sway control system. If you kept the unit installed...
    view full answer...
  • Should Weight Distribution Spring Bars be Engaged Before or After Loading the Trailer
    On a weight distribution system you will engage the spring bars after the trailer is loaded. It is not likely that you would damage the weight distribution system as you unload the trailer. The tension on the spring bars could change though which is why it is best to disengage them prior to unloading.
    view full answer...
  • Weight Distribution Recommendation for Car Trailer Towing Race Car
    The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. If your loaded tongue weight ends...
    view full answer...
  • Can You Back Up With Curt Weight Distribution C17422 if Friction Sway Bar is
    Yes, so long as you remove the friction sway control bar, you can back up with the Curt weight distribution system you asked about: - Curt Short-Arm Weight Distribution System with Sway Control # C17422 The rest of the system including the bars can still be engaged, and you can pretty easily remove the friction bar via the two spring clips at either end. The # C17422 short-arm system is the perfect option for V-nose trailers in particular due to its shorter arms, and is rated for total...
    view full answer...
  • Length of Curt Short-Arm Weight Distribution Bars Compared to Other Standard System Bar Length
    The Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K GTW, 1.5K TW # C17422 has bars that are 28-3/8 inches long. Other standard weight distribution systems have bars between 32-33 inches long.
    view full answer...
  • Should Chains on Curt Short-Arm Weight Distribution System Hang Straight Down to Spring Bars
    The trailer frame mounted brackets for the Curt Short-Arm Weight Distribution System # C17422 should be positioned on the trailer so that the chain hangs directly down to the spring bar. The picture you mentioned is simply the studio photo we took after assembling the system so it's not adjusted exactly how it should be when actually putting it on a trailer for use. The brackets itself will not prevent proper orientation of the chain. I have attached the complete written installation...
    view full answer...
  • Can Weight Distribution be Used with a 2014 Ford F-150 FX2
    Weight distribution is not vehicle specific so you can use it on your 2014 Ford F-150 FX2. The trailer hitch and the vehicle will have to be rated for weight distribution which they will be with your particular truck so no worries there. To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the...
    view full answer...
  • Tongue Weight Range of the Curt Weight Distribution System part # C17422
    The tongue weight range of the Curt Weight Distribution system part # C17422 that you referenced is 1,000-1,500 lbs. The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow, this figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached an FAQ on determining tongue weight for you to check out as well. If your loaded tongue weight falls in that range of 1k...
    view full answer...
  • Will the Curt 15K Short-Arm Weight Distribution System Work With Brackets Welded 31" From Coupler
    In regards to the Curt Short-Arm Weight Distribution System part # C17422, the lift hanger brackets will be installed around 28" back from the center of the coupler. The Curt MV Weight Distribution System part # C17063 will be much more suitable for lift brackets welded 31" back from the center of the coupler.
    view full answer...
  • Short Trunnion Bar For A Weight Distribution System
    The shortest bar I was able to find, is the Replacement Trunnion Bar Kit for Curt Weight Distribution System # C17337, which measures 28-3/8" long. These spring bars are a replacement for the Curt Short-Arm Weight Distribution System with Sway Control # C17422.
    view full answer...
  • Replacement Spring Bars for Curt Weight Distribution System C17422 Rated for More Trailer Weight
    Yes, you can substitute different weight distribution spring bars for the times your trailer is unloaded versus loaded up with your ATVs. The Curt Short-Arm Weight Distribution System # C17422 comes with bars rated to handle from 1000-lbs up to 1500-lbs of trailer tongue weight (TW). You can substitute the 800-lb rated spring bars part # C17308 for towing the empty trailer with 600-lb TW..
    view full answer...
  • Recommended Drop Shank for Weight Distribution Systems
    Thanks for the pictures! The only thing I would recommend changing on your set up is to add a shank with a deeper drop. I recommend the Curt Weight Distribution Shank 13" Long item # C17124 which has a 9" drop. This would move the bars below your trailer's frame. It would also allow you to mount the sway ball bracket correctly on your item # C17422 system. You have it mounted vertically instead of horizontally on your frame.
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for Image 5 for
  • What Size Trailer Frame is Compatible with Lift Brackets in Curt Weight Distribution Systems
    The lift brackets included with Curt weight distribution system # C17422 are designed to fit frames up to 2-3/4 inches wide. For frame wider than 2-3/4 inches you could add separately chain hangers # C17005 which bolt to the sides of the trailer frame.
    view full answer...
  • How to Use Curt Weight Distribution System on Trailer with Propane Tank Frame Interference
    Since you have a propane tank that would interfere with where the frame brackets of the Curt Short Arm Kit part # C17422 would install on the frame I have a different solution that would work well for you, but this kit as-is would not work for you. Instead you'll want to use frame brackets like the # C17005 with the system as these bolt to the side of the trailer frame to give you a way to hang the chains and not have the propane tanks interfere.
    view full answer...
  • Recommended Short Arm Weight Distribution Hitch for Trailer with 1400-lbs of Tongue Weight
    I have a solution for you, but the Curt MV # C17057 that you've currently got won't accept the new components you're wanting to turn your system into a short arm weight distribution hitch. For this reason, you'll need to get a completely new weight distribution hitch. The shortest weight distribution system we have is the Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K GTW, 1.5K TW # C17422, which has 28" long arms and is similarly rated to your # C17057....
    view full answer...
  • Can Curt Short Arm Weight Distribution be Used on Trailer With 28 Inch Tongue
    Appreciate the photo, and yes you can, but you'll need to use bolt-on chain hangers if there is interference that won't allow the brackets to mount to the top of the tongue 28" back. So you'd need to bolt on the chain hangers to the side of the frame (or the side of the trailer frame just behind the tongue if that is where you are measuring 28 inches) in order to use the system. Here is what you'd need: - Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K...
    view full answer...
    Image 1 for


< Previous
12



Do you have a question about this Weight Distribution Hitch?


Info for this part was:

Employee Lindsey S
Updated by:
Lindsey S
Employee Adele M
Updated by:
Adele M
Employee Kathleen M
Updated by:
Kathleen M
Employee Chelsea B
Updated by:
Chelsea B
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Mike S
Updated by:
Mike S
Employee Isabelle B
Updated by:
Isabelle B
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Laura H
Written by:
Laura H
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.