bing tracking image

Redline Trailer Suspension - Leaf Spring Suspension - E4139 Review

content loading

Customers compare E4139 to these similar products




Products Featured in this Video



Review of Redline Trailer Suspension E4139


Today, we're going to be taking a look at the front, center, or rear hanger, for double-eye springs. This hanger can be used as a front hanger on single axle applications, and it can be used as a front, center, or rear hanger, on tandem or triple axle applications. It's going to fit 1 3/4" wide double-eye springs with 9/16" diameter eyes. It does work with a 9/16" diameter bolt, hardware sold separately. The unit's made from a sturdy steel construction. It measures around 3/16" thick.

It is a weld-on application, so this will weld directly to the trailer frame. The height measurement for a hanger is taken from the center of the mount hold to the top of the hanger. The height for this particular one is going to give us a measurement of about 4 1/4". The overall length, looking at about 3". External width is about 2 5/6" to 2 3/8".

Internal width, it's going to measure about 1 7/8 to 1 15/16", and then the overall height of the unit, that's going to measure about 4 7/8" tall. Then the holes on the unit, again, have that diameter of 9/16". That's going to do it for today's look at the front, center, or rear hanger, for double-eye springs.


Info for this part was:

Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.