Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Features:
Specs:
Air Lift's LoadLifter 5000 was designed with an exact purpose: to provide full-time, first-class support to your 3/4- or 1-ton pickup, motor home, or commercial truck. With this kit, you get a safer ride and simultaneously protect your vehicle from the strain that comes with hauling massive loads.
Carrying heavy cargo in your truck bed or trailer puts tremendous stress on your vehicle. Your brakes erode faster, your tires wear unevenly, and handling suffers severely. When towing, you might also experience excessive sway, bottoming out, and even improper and unsafe headlight aim. Fortunately, there is a solution to these problems. By pairing your existing suspension with the LoadLifter 5000, you can seriously beef up your suspension, ensure equal load distribution, and give your vehicle the support it desperately needs. Air Lift's LoadLifter 5000 provides up to 5,000 pounds of load-leveling capacity and distributes the weight of your payload to all four wheels. As a result, the stress on your OEM suspension is significantly reduced.
LoadLifter's air bags are adjustable from 5 to 100 psi for precise support, and they can be inflated independently of one another for front-to-rear and side-to-side leveling. They are made of high-quality, two-ply, fabric-reinforced rubber. Most air bags lose air at the ends, where the bag is enclosed with a steel cap, because the steel can rust and corrode over time, creating small holes. The endcaps on Air Lift air bags are fashioned from corrosion-proof Zytel nylon, a material that is both stronger and lighter than steel, ensuring that the air bags won't lose air. Also, LoadLifter 5000 comes with Air Lift's exclusive roll plates, which both protect your air springs and beef up the load capacity of the springs.
This system installs with the included brackets and hardware. Just mount the springs, inflate them, and ride. To inflate the LoadLifter springs, you just have to pump air in through the inflation valves. A line kit is included with the springs so that you can install the valves (one for each spring) in an easily accessible area - typically they are installed on the bumper. If you want to make the springs even easier to use, you can get a compressor and gauge system (sold separately).
Air Lift kits are designed to keep your vehicle at normal ride height. You can find the normal ride height of your vehicle by unloading it and measuring the distance between the bottom edge of your wheel well and the center of the hub. After you find and record this distance, you can regulate the amount of air that you put into your air springs to maintain normal ride height - even when you are hauling a heavy load. You will need to adjust the air pressure in your air bags according to the size of your load.
Along with a lifetime warranty that has no mileage restrictions, Air Lift offers a 60-day satisfaction guarantee. Just install and use LoadLifter 5000 springs for 60 days, and if you are not satisfied at the end of this time, you can remove them from your vehicle and return them for a full product refund. Now that's confidence.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (1178 Customer Reviews)
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.Installation was easy (I didn’t install a compressor). Might be obvious to most, but remove the rear tires and it’ll be much easier.
Just a couple of pulses from my compressor (I use a portable that stays inside my van for emergency) and the van lifts right up. I was able to perfectly level my van and my trailer. I only used a lower pressure and that tells me there is a lot of lift left.
The ride empty is noticeable, but not harsh. More just on a little firmer side using about 5 psi as recommended minimum. The ride loaded is great, as there is less wander in the front. Note that my van and trailer were close to level and I got the airbags just to finish off the ride (I wasn’t having major problems).
Sara was the best too. She understood my questions and gave very informed answers. Very much appreciated.
Good product at a great price drop shipped to my door in a few days, Had it installed on my 2500 chevy van in less than 3 hours. Was just what the doctor ordered to level the van out when towing a 26' enclosed car hauler. no need for the special load equalizer hitch setup either!!
Install was super easy. Everything hooked right up. Only complaint would be the u bracket bolts are not very good grade. Other than that seems dood to go
Purchased for my 2019 Silverado 3500HD. I've not had long-term use of it yet, but based on other reviews I anticipate everything will function well for many miles to come.
One thing I wish was included in the package from the manufacturer was the Air Lift Union Tee #21838 which I ended up purchasing separatly. The included air line is fitted with an air valve at each end, requiring you to fill the springs individually. For my use, I wanted a single shared line so the springs remain equal, especially in the event of a leak. I recommend the Air Line brand fitting as I first tried a knockoff version since it was more quickly available, but the entire 5-pack leaked around the o-rings so I had even more downtime (do it right the first time...).
I also have a B&W gooseneck wheel hitch and the instructions call for drilling into the frame and using the self-tapping screws to mount the top plate. I was able to use the U-bolts over my hitch bracket at the rear of the plate, but still had to drill into the frame for the front due to the hitch brackets being higher than the frame rail. It's an awkward angle without having lift access, but still very doable - just a tight fit drilling next to the fuel tank.
Overall, a great solution to improving towing.
I am not happy with trailer. The box arrived and was all taped up and abused. When I opened the box there was an important part missed. I called and talked to Joanne and she asked me to send pics of the box and I did and have not heard from anyone about the missing part.i hope you will be able to help me get this part issue solved.
Work the air bags Monday thru Friday every week since install.They complement upgraded leaf springs very well! Had no maintenance or problems of any kind.
Excellent material and the installation instructions were very clear and to the point with the best pictures that coincided with the written material. Only took me 2.5 hours from the start of assembling the air bags with the hardware on the workbench to putting away my tools! This is on my '04 dodge 3500 dually that will be handling my new Host Mammoth Slide in Camper that will set at apprx. 5000 lbs.! Beautiful to maintain level truck and to know that the springs are not collapsed and wearing them down prematurely as well as providing a safe handling truck when on the road.
The air springs solved my driveway clearance issues. Set compressor to 100 lbs for an extra 2” of ground clearance and lowered them to 30 lbs after exiting driveway for cruising. Hardest part of installation was drilling 1/2” holes for the upper mounts. Left the rear duals on for the install. Love the rise at 30 lbs. much smoother and more stable on the road. (2014 Winnebago Vista 31KE) Kelly L. was a great help when ordering!
Installation of the Loadlifter 5000 kit went smoothly, no issues at all. One of the best advantages of having this system on my F-150 is the stabilization it provides when towing our camper. I tow a 6,000 lb camper with an 800 lb hitch weight. I use a weight distribution hitch so the truck and camper ride level, as they should. The difference with the Loadlifter system is that it controls the bounce, providing a much more stable and controlled ride. I highly recommend this air spring kit in conjunction with a weight distribution hitch. When you don't need to added support of the air springs, ie no load, just drop the air pressure down to 5 lbs and you don't know they are there.
Installation was straightforward and retained the original suspension while adding the bags. Inflation to level the rig, a 2018 Ram 1500 and a 3 1/2 ton travel trailer, was surprisingly quick. The ride from Southern California to Central Oklahoma was uneventful. The bags handled the load and the road without sway or dip. Very happy with the product.
I hope I never loose an airbag because it’s very difficult to remove the 4 upper & lower retainer bolts.
The bags should be studded like big rig bags.
Order after order I have been completely satisfied with E-Trailer. They are always available for questions, and best of all they have the answers. The products they sell are first rate.
My last order was the Air lift load lifter 5000 item # AL 57288. After confirming the fit for my truck with there team, I ordered it. It arrived on time, and in great condition.
The team at E-Trailer know there stuff and are ready to help you.
Good product, quick service. Took a couple hrs to install and very happy with the results
Great product but instructions could be better. Simple things like identifying parts better to make it quicker to find the right part. Like in step3 installing M10 bolts, they were the only black bolts, if they said that it would have been really quick to identify them in the parts bin.
Better identifying info on pictures to orientate you as to what your looking at.
A zoomed out view every once in a while of where things are in relation to the truck.
In step 10 be more specific about the part your cutting, they talk about taking brake line mount X off and then talks about cutting a brake line mount but its a different one.
Installing Nylon Air lines - SO right off it tells you to cut the line in half ie one for each side, but you should first look at how the line for the right side where the muffler is as I could not route it along that frame rail as it would be WAY to close to the muffler going to the air bag. so I was not able to route it cleaner the long way on the left frame rail and over axle.
Last it NEVER says how to attach the air line to the 90 deg fitting on the air bag. Had to go to youtube to see its a simple press on but without saying that....
I have had rear suspension airbags on the last 5 trucks I have owned. There is no better system to control weight roll of a load in the bed or sway control pulling trailers.Be sure to order the air line "T" which does not come with the kit so that "T" can be connected to use only 1 air fill location to balance your load.
No more need for sway control bars to struggle when pulling your camper with this set up.
This is not a review of the product but a review of the site. This is sold for a 2006 dodge ram. So I purchased it 4 months ago. Well I finally opened the product to install and it is for a 2006 dodge ram 1500. I own a 2500. So this product doesnt have the proper brackets to fit my truck. No where in the descriptions does it mention what model dodge ram it is for. It also doesn't display anything on the box to show you have the wrong product until it is opened and you review the install manual. So do your extra homework to make sure you purchase what actually fits
Game changer, is all I can say. I’m 67 years old and have towed everything from motorcycle trailers, snowmobile trailers, toy haulers, boats and travel trailers. I currently tow a 26’ Keystone Cougar travel trailer that weighs approximately 6800lbs. My tow vehicle is a 2021 Ford F150 powered by a V8.
Once the camper is loaded I install the sway bars and inflate the loadLifter to between 70 - 80 psi depending on payload weight. Once inflated to proper psi the LoadLifter returns the vehicle and suspension to the non-loaded height, this allows the breaking system and steering to function properly. It also helps stiffen the suspension and drastically reduces trailer sway to a minimum.
I’ll never have another tow vehicle without LoadLifters!!!
I purchased the system for my 2013 Ram 1500 to provide lift and added support for the 34'toyhauler (6,000 lbs.) we were purchasing for our move from ME to NC. The system easily allowed the truck and trailer to remain in a level position no matter how we loaded it. Very pleased with it. Money well spent.
I have a 2011 GMC 2500 HD. Installation was fairly easy; must have patience. Instructions indicated could not use U bolts with fifth wheel hitch. In my case, I found with a little finesse I was able to install the U bolts just fine without having to drill holes in the frame. I have a Reese fifth wheel hitch. So far after pulling my trailer one time it works great.
Do you have a question about this Vehicle Suspension?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.