This low-profile LED tail light uses 8 diodes—6 for the tail light and 2 for the license plate—to deliver bright, even illumination with minimal power draw. At 12V, it only pulls 0.117 amps for stop/turn and 0.053 amps for tail, so it’s easy on your electrical system while giving you strong visibility. The LEDs last up to 50 times longer than old-style incandescent bulbs, meaning you won’t be dealing with broken filaments or dim lights anytime soon.
Water damage can ruin a light quickly, but this one is built to handle it. The lens and housing are sonically sealed into a single waterproof unit that’s fully submersible. That means no moisture sneaking in to corrode the circuit board or short the LEDs. Whether it’s rain, spray, or full submersion, this light stays protected and ready to go.
No need for extra reflectors or cluttered setups. This light includes an integrated reflex reflector that meets visibility needs without adding separate parts. The design keeps things simple while maintaining safety and compliance, so your setup looks tidy and professional.
Mounting this light is simple thanks to its surface-mount bracket design—just hardwire the 3-wire pigtail connection for power, turn, and ground. Measuring 7-1/2" long x 5" tall x 1-5/16" deep, it fits neatly on most surfaces without sticking out awkwardly. The durable plastic housing with an acrylic lens adds strength without extra bulk, and hardware can be chosen to match your exact preference.
This driver-side light combines all the key rear lighting functions—stop, tail, turn, and license plate illumination—into one compact unit. Its red and clear lens over white LEDs delivers bright signals that other drivers can see clearly from every angle, helping keep you visible and safe on the road or at the ramp.
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
Ratings & Reviews
Great LED light
Exactly what I needed. Direct replaceme nt
While I struggled a bit to find the exact product I needed on the website, my experience with Etrailer was truly 5 stars. I called. Austin quickly found the correct part. I purchased it. It was sent and arrived quickly. And I was able to install within minutes.
Good but concern with the plastic license plate mounts
it was not exact fit for the trailer but it works.
do you do repairs on rv's? this one roof is full of holes (Hail damage)
and all the plastic covers are broken, and the bed is totally missing.
like to get an estimate of repairs.
Regards
Works great
Fast delivery and exactly as advertised. Looks great.
Works great! Would buy again
Great light, and not expensive, easy in stall.
A significant upgrade over the 20+ year old original lights. Much brighter, especially during the day. Easy to install as well.
I am not impressed for the all plastic license plate mount. I would not mount my license plate on it. It should be metal. The LED light is nice.
Led rv trailer lights came in quick and will be replacing factory bulb type
They were as ordered. I did price lights locally and could not even come close to beating the price on these.
Hello eTrailer,
> Good LED tail-light for the price.
> Will be a replacement for RV Trailer.
> Good low current draw with long lasting use.
> Plastic base could be a little better quality for UV exposure.
Thanks for the fast delivery and follow-up feedback !
Regards
LG Moore
These are the perfect smaller size and kept my mid- 80's vintage motorcycle camper trailer legal on the road. Thank you etrailer!! I made my annual camping trip:). I searched and searched and nothing else was compatible
I just got back from my beach camping trip, 225 miles each way. These are great little camper trailer lights. They are a modern design. You just need to mount them to a flat surface and use a little bit of silicone or clear all weathertape around the lenses so they don't pop off if you hit a bad spot in the road. I also put a couple extra screws to reinforce the license plate into the camper as the license plate mounting bracket is thin plastic.Still great after one year!!
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.