Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs
(348 reviews)
Price: $74.54
In Stock
Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs
Item # TJA-5000S-B
Our Price: $74.54
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (348)
- Q & A (0)
- Photos
etrailer Trailer Jack - TJA-5000S-B
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Sidewind Jack
- Bolt-On
- Weld-On
- A-Frame Jack
- Leveling Jacks
- Tongue Jacks
- 16 Inch Lift
- No Wheel or Foot
- etrailer
Black powder coated A-frame jack has a retracted height of 8-3/8" and an extended height of 24". The external gearbox is easily accessible, and the zinc-finished sidewind handle arm provides a sleek look.
Features:
- Utility jack lets you raise and lower your A-frame trailer
- Sidewind handle has zinc finish for attractive look and rust resistance
- Black powder coat finish resists corrosion
- External gearbox is easily accessible
- Effortless greasing with built-in grease zerk
- Footplate or caster sold separately
Specs:
- Bracket height (from bottom of inner tube to bottom of bracket):
- 8-3/8" Retracted
- 24" Extended
- Travel: 15-5/8"
- Clearance: 15" from bottom of bracket to top of jack
- Outer tube diameter: 2-1/4"
- Inner tube diameter: 2"
- Handle radius: 8"
- Lift capacity: 3,000 lbs
- Support capacity: 5,000 lbs
- 1-Year warranty
TJA-5000S-B Ram Round A-Frame Trailer Jack - Side Wind - 15-5/8" Travel - 5,000 lbs
Compare to Bulldog BD1700100317
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Package not accepted
- Product did not meet expectations
Customer Reviews
Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs - TJA-5000S-B
Average Customer Rating: 4.8 out of 5 stars (348 Customer Reviews)
Black powder coated A-frame jack has a retracted height of 8-3/8" and an extended height of 24". The external gearbox is easily accessible, and the zinc-finished sidewind handle arm provides a sleek look.by: Nick 05/16/2024
It bolted right on trailer and works/cranks easily. Nice it's greaseable as my trailer lives outside.
by: Ronald 03/08/2024
Great Jack. Works flawlessly. They shipped my order very rapidly the Jack was spot on in the decryption.
by: Roger S.08/12/2017
I modified spare tire location (needed more tongue weight), so replaced top mount crank jack with side wind version. Shipping speed was upgraded sans asking and received item just before my next trip. Installed in 5 minutes and jack is much more ergonomic than original. Whenever I need anything trailer or pick up truck related, I don't even bother shopping around, for etrailer pretty much has everything! Customer service is outstanding even with returns or replacements. Completely satisfied with product and service.
Thanks for everything Etrailer
by: Kent03/07/2024
Simple, strong, and reliable
by: Mark 01/31/2024
Work perfectly for the application we intended, as risers for a 30’ belt!
by: Ryan S.05/22/2024
Item arrived one day after expected date, but that was due to UPS. etrailer has it processed and out to UPS same day I ordered it, which was a Sunday too. Item arrived great. Was exactly what was described. I could not find this same jack at other stores. etrailer had exactly what I needed and it was cheaper, with a higher rating too. Will order from etrailer again.
by: Isaac 11/12/2023
Existing job site trailer jack broke Thursday. Menards, Home Depot, Northern tool, Mill didn't have the needed style in stock. Ordered it up and got here on Saturday. Perfect fit and higher weight rating than previous jack. Cranks smooth.
by: Sharon 02/08/2024
Jack was good product
by: Happy Camper III05/08/2024
This is a sturdy and easy to use manual jack. It is replacing a failed electric jack, and I am glad to have a manual jack of this high quality. It is the perfect size for my 3500 lb Rockwood Travel Trailer.
by: Billy 02/27/2024
Installed easy and has been working flawlessly. Had next day delivery.
by: Oscar06/14/2020
The TJA-5000S-B jack I ordered was exactly what I needed. It was easy to install. The photos show the old jack and the new jack that I needed so that I could mount 2 bikes on front of my Forrest River A-frame camping trailer.
by: William03/17/2018
I've had this installed on my utility trailer for about a year now. It works great. I've had some pretty big loads in it and have had no issues raising and lowering it with this jack.
by: Aaron07/05/2018
Package came very quick. Went right on to my trailer. The foot that "matched" the jack I bought did not work. Had to run to a local store and get one that would.
by: Jeremy04/08/2024
Great product
by: Eric F.07/03/2017
Product came on time, as advertised. Had a hard time believing the low price!! My old jack was so damaged I had to persuade it off with hammer and chisel, but then this jack went on in minutes. Functions smoothly. Couldn't be happier. etrailer has all my future trailer business. Five Stars.
by: Lucas 06/01/2023
The replacement tongue jack fit perfectly (hole alignment) and the movement is back to the way the original jack worked when brand new. Haven't used it in its full range yet, but so far looks promising. Just a little concerned about the top cover of the jack which appears that it would let rain water into the gear box. I applied a quart size zip lock bag which should keep the rain out.
by: Dennis09/16/2022
Works as advertised. Definitely a great price on this jack.. I use it daily on a 20ft trailer.. lets see how long it last me..
by: Jess02/18/2022
Works as intended. I have it on a small 20ft camper that weighs about 4k Lbs. I recommend adding grease and an adjustable bottom with a quick release pin.
Jess
3/10/2023
1 year later still working. No problems.
by: Steve03/22/2023
A long search for an American made jack led me to etrailer.com. Turns out the jack was made in China. Disappointed!!
Jenny N.
3/23/2023
We love to offer parts that are made in the USA. We do not offer a similar jack that is USA made however on any part that is, it will be listed on the product page as Made in USA.
by: Andrew 03/07/2024
Excellent service nothing but good thin gs
by: William09/08/2023
Jack works fine, but arrived with several dings and chips in paint. I realize it will probably get that way eventually anyway, but would expect it to arrive looking new.
Jenny N.
9/12/2023
These jacks arrive to us in large pallets which unfortunately does mean they are not in the best shape. I am happy to have Customer Service contact you.
by: RT02/16/2024
Worked perfectly. Easy to weld up and strong as ever!
by: David08/31/2023
Easy installation! Just three bolts and back in action...
by: Jeff 02/19/2024
VERY PROMPT SERVICE
by: CHAD C03/04/2017
I bought this for a basketball goal replacement and it worked out GREAT!! It raises the backboard with ease, and my 8 year old daughter loves it. It shipped out faster than I was expecting, and it arrived in just a few days. Awesome job towards Etrailer!!!!!!
I will definitely recommend Etrailer to anyone !!
25
348
Show More Reviews
See what our Experts say about this etrailer Trailer Jack
- Replacement Sidewind Jack for 23 Foot Boat Trailer with Shelby A-Frame JackTrailer jacks only have to lift the tongue weight of a trailer. So, your trailer weighing about 4,000 lbs would only have about 400 lbs of tongue weight which the etrailer jack part # TJA-5000S-B that you referenced would easily take care of. This matches the style of jack you need and fits the standard a-frame bracket your trailer has so it will fit and work really well. The 5,000 lb capacity is more than enough and will ensure easy use and little wear on the jack. To add a wheel to...
view full answer...
- Replacement Jack for Atwood 81911 Trailer CouplerThe tongue weight capacity of your trailer coupler is not really needed when choosing a replacement tongue jack. The replacement tongue jack just needs to be rated for the tongue weight of the trailer which is around 10-15% of the total weight. That said, I see it says the max weight capacity that can be used for a trailer jack is 5,000 lbs so if you wanted to be covered without worrying about how much your trailer weighs exactly you can just go with the etrailer Round, A-Frame Jack part...
view full answer...
- A-Frame Trailer Jack with 4 Inches Bracket to Bottom of Jack Clearance when RetractedThe mounting bracket on etrailer jack # TJA-5000S-B is welded to the outer jack tube so it cannot be moved. It measures 8-3/8 inches when retracted. If 2,000 pounds capacity is enough, then Pro Series jack # PS1401000303 measures just 5-1/2 inches retracted.
view full answer... - How Long is the Handle on the 5k Pro Series Round, A-Frame Trailer JackWhat I suggest is a sidewinding handle pointed away from the obstruction like # TJA-5000S-B. But to answer your question the handle measures 6-1/2 inches from the center of the jack to the end of the handle. It is just 1 inch too long so I would go with a sidewind jack. I have also linked powered A-frame jacks for you as another option.
view full answer... - Which Is Easier to Crank, a Side Wind Jack or a Top Wind JackAll A-Frame mounted jacks like the Pro Series Jack part # PS1400600303 use the same 3-inch mounting hole bolt pattern. In other words, the mounting holes are a universal size and pattern so that any A-Frame jack will fit into any A-Frame jack mount. As long as your trailer has an A-Frame jack mount, this jack will fit. Topwind jacks and sidewind jacks will both require the same amount of force to operate. Personally I prefer sidewinds as the cranking movement feels less awkward and more...
view full answer... - Recommended A-Frame Trailer Tongue Jack for the Demco Trailer Coupler Part # DM15337-97I do have an a-frame trailer tongue jack that will work with the Demco 50-Degree A-Frame Trailer Coupler part # DM15337-97 but the Square A-Frame Jack part # TJDA-5000S will not due to its square shaped design. Instead, I recommend using the Round A-Frame Trailer Jack part # TJA-5000S-B which has specifications that are very similar to the above jack. I have attached a review video of both the trailer jack and trailer coupler for you as well.
view full answer... - Will a Different Brand A-Frame Trailer Jack Fit In Place of a Shelby JackA-Frame jacks all use the same bolt pattern. Most have slotted holes that allow for a little wiggle room. Some even have more than one set of mounting holes just in case there is a non-standard pattern on the trailer. If you can tell me the capacity you need and if you need a wheel or foot I can make some recommendations. I have included a link to all of the A-frame jacks we carry.
view full answer... - Determining If Weight Distribution Hitch Will Fit Coachmen Clipper Classic 1270ST W/ Side Mount JackIt may be possible to use a weight distribution hitch with the side mounted jack on your Coachmen Clipper Classic 1270ST Pop Up Camper, but it will depend where it is located. Based on the pictures of trailers similar to yours that I was able to find it appears your trailer has an A-Frame. If that is the case then installing an A-Frame jack like the # TJA-5000S-B if it has the center jack mounting hole. If your side mount jack is just bolted on and can be moved then moving it as far back...
view full answer... - Availability of Square Tube Bulldog A-Frame JackWe do carry square tube Bulldog A-frame jacks. You would want the Bulldog Square, A-Frame Jack # BD195321 if you can use a top wind jack, currently there are no sidewind square Bulldog jacks. This jack should do very well for you, and yes, the square tube jacks do have superior side-load strength. From your picture it looks like you would need a sidewind jack. Barker only makes powered jacks so the dimensions would be much different. If you need a specific difference email me back and...
view full answer...
- Recommended Trailer Jack Options For 1993 Jayco Eagle CamperFor your 1993 Jayco Eagle camper weighing 6800 lbs, I am not sure if you need an A-frame tongue jack for a travel trailer, replacement landing gear for a 5th wheel, or stabilizer jacks. The side jack makes me think 5th wheel or stabilizer jack but I will give all recommendations. If your 1993 Jayco Eagle is a 5th wheel trailer, I recommend the Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs # LG-1. This landing gear has a leg length of 29-1/2 inches with...
view full answer... - Recommended Footplate for Etrailer.com A-Frame Trailer Jack # TJA-5000S-BThe etrailer.com Round A-Frame Trailer Jack # TJA-5000S-B that you referenced does not include a footplate. This is actually not all that uncommon, as it simply allows you to choose the type of base you want (footplate or caster wheel) or use a base that you might already have. For a footplate that will work perfectly with this jack, I recommend the etrailer.com Footplate # JF-99. It will attach right to the 2 inch inner tube on this jack and it features a clear zinc finish to provide...
view full answer... - Trailer Foot that Fits Trailer Jack # TJA-5000S-BThe # JF-99 fit your etrailer.com trailer jack # TJA-5000S-B.
view full answer... - How Would Bulldog Jack part # TJA-5000S-B Get LubricatedTo maintain the etrailer Jack part # TJA-5000S-B that you mentioned your best option will be to spray a lithium grease up the inner leg to cover the moving parts. It also has a grease zerk fitting for easy maintenance.
view full answer... - Recommended Manual and Electric A-Frame Jacks for a Snowmobile TrailerThe best option for an electric A-Frame jack is going to be the Stromberg Carlson Electric Trailer Jack item # JET-3755. This jack is rated for up to 3,500 lbs of tongue weight. It will travel 19" and an additional 5" with the drop leg extended. I have linked an installation video below. You can weld or bolt this jack on. It fits the standard a-frame jack bolt hole dimensions. It also has a manual crank. For a manual jack, you will want the Ultimate Trailer Jack item # 322-RDJ-2K. This...
view full answer... - Drop Leg For etrailer Round, A-Frame Jack TJA-5000S-BWe do have a drop leg that is compatible with the etrailer Round, A-Frame Jack # TJA-5000S-B. The drop leg needs to fit the jack tube's 1-3/4" inside diameter, and for that you will need the Drop Leg for etrailer and Ram Jacks - 13-1/4" Tall - 5-1/4" Diameter Footplate - Zinc # JF-1005H-Z. I have added some links below to video reviews for you to check out as well.
view full answer... - Is Wheel Available For Pro Series Square JackAll of the wheel casters that we carry limit the jack capacities to 1,200 lbs. We typically carry them for the round A-frame jacks like the Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs # TJA-5000S-B. We do not carry wheels that will work with the Square Direct Weld Jack # TJD-5000.
view full answer... - Replacement Trailer Jack For A-Frame Coupler With 2500 lb Tongue WeightFor your application there really isn't a comparable replacement jack. You cannot use a product designed for larger tubes on your jack that has moving parts. You could use a foot that is larger and then use a metal tube as a coupler to give you a firm connection as long as the rating is strong enough. I recommend just getting a new jack like the etrailer Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs # TJA-5000S-B. You may need to file the opening in your coupler...
view full answer... - Possible Solution for Bent A-Frame Trailer Due to Swivel JackThe frame members of a trailer really aren't replaceable. Your best option will be to take the trailer (carefully) to a fabricator to see if they weld in a new section of frame there. You should also have them go over the trailer to make sure there aren't any other structural issues that need addressing as well. Also be sure not to overload the trailer. It looks like it bent where the swivel jack was initially installed. You might have that front section of the trailer reinforced with another...
view full answer... - Sidewind A-Frame Trailer jack Recommendation for 16 ft Car TrailerOne of the most popular jacks we offer that is for an a-frame trailer that has a sidewind is the etrailer part # TJA-5000S-B which has a 5,000 lb lifting capacity and would work very well for you. For a foot plate to go with it you would want the part # JF-99.
view full answer... - Recommendation for an A-Frame Horse Trailer Jack with 15 Inch Lift and 5,000 Pound CapacityIf you are looking for another A-Frame jack, we have the Bulldog Round, A-Frame Jack - Topwind - 15" Lift - 5,000 lbs # BD155032, with 15 inch lift and 5,000 pound capacity. Or an etrailer side wind Jack, # TJA-5000S-B. The mounting bracket on these jacks use the same hole spacing as your old jack.
view full answer... - Can The etrailer Round A-Frame Trailer Jack Handle Be Moved To The Rear Side Of The JackThe handle of the etrailer Round A-Frame Trailer Jack # TJA-5000S-B would not be able to be moved to the back without reconfiguring the gears and how they function to lift the jack. Instead I recommend the Trailer Valet JXC Trailer Jack w/ Footplate and Drill Powered Option # TV94FR, which has multiple mounting holes so that you can place the handle on the rear side of the trailer tongue. This jack also comes with drill attachment that can be used to quickly and easily raise or lower...
view full answer... - Mounting Hole Dimensions and Spacing on etrailer.com A-Frame Trailer Jack # TJA-5000S-BThe Round A-Frame Trailer Jack # TJA-5000S-B has mounting holes that are elongated. The actual holes are 3/4 inch long and 7/16 inch wide. That gives you a minimum of 2-1/2 inches or maximum of 3-3/4 inches to the nearest or farthest part for mounting. I've attached a photo to assist.
view full answer...
- Replacement Side-Wind Manual Jack For a 2016 Forest River Flagstaff 276 High Wall CamperYes, the Round A-Frame Trailer Jack # TJA-5000S-B will fit on your 2016 Forest River Flagstaff 276 High Wall camper.
view full answer... - Which Foot Plate Or Wheel Caster Should be Used with etrailerTrailer Jack # TJA-5000S-BSounds like you are looking for a wheel caster or foot plate and that's why you are needing dimensions. For the etrailer trailer jack part # TJA-5000S-B we can recommend the # JF-99 for a foot or part # PS1400750340 for a wheel caster. You should note that when using this wheel caster instead you'd reduce the capacity of the jack down to 1,200 lbs.
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Dustin K
Video Edited:
Chris R
Installed by:
Cole B
Installed by:
Randy B
Installed by:
Aidan B
Updated by:
Wilson B
Updated by:
Ronnie R
Updated by:
Mike S
Written by:
Amanda M
Video by:
Zach D
Video by:
Charles A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Roger S.
8/12/2018
Still working fine. Smooth and easy operation. I seriously doubt that I’ll have any issues with the side wind trailer jack.