Availability Of Trailer Hub With .75" Outer And 1.25" Inner Bearings
Updated 08/17/2024 | Published 08/11/2023
Products Featured in This Question
Question:
Hello Im looking for a set of new hubs for an old balko trailer, outer bearings are 3/4 inch and inner appear to be 1 1/4 max. I found out that 1 3/8 is way too big for the inner. Naturally the 1 1/16 was too large for the outer. Do you guys have anything for this? Ultimately looking for a 5 lug 4.5 center, but Ill take whatever I can get so I can get new wheels. Currently the hubs need new bearings, but the the lugs are 5lug with 4.75 center. Finding smaller wheels than 15 inch seem to be elusive. Any thoughts? Id prefer to fix the trailer vs scrap it. Thank you for your time.
asked by: Matt D
Expert Reply:
I do have one hub that uses a .75" ( # LM11949) outer and a 1.25" ( # LM67048) inner bearing. This bearing combination is uncommon these days, but we have the hub # DX22XR. This is a 5 on 4-1/2" idler hub for a 2,500 lb axle. Bearings, seals, races, grease cap and lug nuts are all included. We also have a few sizes of wheels that will go with this;
15" wheel - # AM20422
14" wheel - # AM20365
13" wheel - # AM20253
12" wheel - # AM20132
We can also provide tires for any size trailer wheel if you are in need.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: trailer tires and wheels
- Search Results: spare tire mount
- Search Results: trailer wheels center caps
- Search Results: saftey chains
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Kenda Karrier KR53 ST205/75R15 Radial Trailer Tire with 15" Black Aluminum Wheel - 5 on 4-1/2
- Search Results: spindle nut
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Grease Seal - Double Lip - I.D. 1.688" / O.D. 2.332" - Older UFP Hubs/Marine Axles - Qty 1
- Shop: Kenda 6.90/6.00-9 Bias Trailer Tire with 9" White Wheel - 4 on 4 - Load Range C
- Shop: CE Smith Trailer Axle Beam with Studded Hubs - 5 on 4-1/2" - 54" Long - 1.8K
- Search Results: axel nut
- Search Results: 3/4" spindle nut
- Video: Review of Lionshead Trailer Tires and Wheels - Wheel Only - LH42VR
- Q&A: Replacement Trailer Idler Hubs For a 2007 Tracker TrailStar Boat Trailer
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Video: What to Know About the DeeMaxx Drive-In Wheel Stud
- Video: Replacement Shackle Strap Feature Review
- Shop: Trailer Wiring
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: Can Hubs be Replaced on Older Trailer with 09067 Bearings
- Video: All About the Demco Hydraulic Drum Brake Assembly
- Q&A: 4 Bolt Hub and Spindle Nut for a CE Smith 2k Trailer Axle
- Q&A: Replacement Needed for the Titan Hub T1721400042
- Video: Ultimate Overview of the Curt 7-Way Trailer Plug Extension
- Video: An In-Depth Look at the Curt 7-Way Trailer Plug Extension
- Q&A: Trailer Idler Hub That Uses a LM67048 Bearing and Has a 5 on 4-1/2 Inch Bolt Pattern
- Q&A: Removing and Replacing Trailer Spindles
- Video: 3500lb Trailer Idler Hubs Direct Comparison
on Trailer Hubs and Drums
Marvin
8/17/2024
dx22r hub is the size I need, 3/4-1 1/4 axle, but I have one I ordered and it is to 4 1/16 tall. I need one shorter than that. can u tell me the measurments?