Replacement Hub with LM67048 Inner Bearing and LM11949 Outer Bearing
Updated 06/10/2019 | Published 06/09/2019
Products Featured in This Question
Question:
Hi, I have an old single axle utility trailer 4x6 , the inner race on one of the hubs does not fit tight anymore , so I need new hub and I want to replace both at the same time, the inner bearing lm67048 and race lm67010 is different from outer bearing lm11949 and race lm11910 and the seal 7834 , can you help me find the correct hubs please? 5 on 4 1/2 with 15 inch wheels , thank you!
asked by: EDWARD S
Helpful Expert Reply:
Based on the inner and outer bearing numbers you provided (thank you!) the correct trailer hub assembly for your utility trailer is the # DX22XR. This hub does use the same # LM67048 inner bearing and # LM11949 as your existing assemblies. It is designed for 2,500 pound axles. The bearings, races, and grease seal are included.
I wasn't able to pinpoint the dimensions on your current grease seal based on the part number you gave. The seal included with this particular hub has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. You can take a measurement on the spindle where the seal sits to make sure it matches this inner diameter.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- LM67048 / LM11949
- Standard Grade
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: lm67048 / lm11949 trailer hubs and drums
- Search Results: trailer hubs and drums
- Shop: Trailer Hitch
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Search Results: lm11949 hubs
- Search Results: lm67048
- Search Results: lm67048 bearing
- Search Results: bearing buddy
- Search Results: bearing buddy trailer bearings races seals caps
- Shop: Trailer Wiring
- Shop: Terran Industries Double Lip Grease Seal - I.D. 1.500" / O.D. 1.983" for 2K to 2.5K Axles
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hub Components for Hub 9606020
- Q&A: Replacement Grease Seal for Trailer With Bearings LM67048 and LM11949
- Shop: Nerf Bars - Running Boards
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Q&A: What is the Inner Diameter of Trailer Bearings L44649 and L68149
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Video: Review of etrailer Trailer Hubs and Drums - Galvanized Idler Hub - AKIHUB-545-35-G-K
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Q&A: What Size Axle Does a #84 Spindle Fit
- Q&A: Correct Spindle for Hub with L44610 and L68111 Races
- Article: How to Measure a Trailer Axle
- Q&A: Replacement Hub Options For a Spindle With 1-1/4 Inner Bearing and 7/8 Outer Bearing
- Video: All You Need to Know About the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles