Hub Recommendation for Trailer Spindle that Measures 1.25 and .75 inches
Published 10/14/2016
Products Featured in This Question
Question:
I have a tapered axle spindle that measures- 1.25 and .75. I would like to know if you had bearings and seals to fit it, also would be interested in hub and drum to fit. Thanks
asked by: George L
0
Expert Reply:
It sounds like you are in need of an agricultural hub like the part # AH15450ECOMP that has a diameter of .75 where the inner bearing rides and 1.25 inches where the outer bearing rides.
This hub has a 4 on 4 inch bolt pattern so if you needed one with a 5 on 4-1/2 inch bolt pattern you would want the part # DX22XR.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Trailer Hubs and Drums
- Idler Hub
- Agricultural
- LM67048 / LM11949
- Standard Grade
- For 3000 lbs Axles
- 1/2 Inch Stud
- 4 on 5 Inch
- TruRyde
more information >
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Shop: Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Search Results: trailer hubs and drums
- Search Results: lm11949 hubs
- Shop: Agricultural Spindle for 3,000-lb Trailer Axles - 1-5/8" Diameter
- Search Results: tapered spindle hub
- Q&A: Hub Recommendation for Spindle with Diameters of .75 and 1.25 inches
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Shop: Agricultural Spindle for 6,000-lb Trailer Axles - 2-3/4" Diameter
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Search Results: lm67048
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Video: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy Spec Review
- Video: What to Know About the Trailer Hub and Drum Assembly
- Search Results: bearing lm11949 trailer bearings races seals caps
- Q&A: Replacement Hubs Based on Tapered Spindle Measurements
- Search Results: coupon
- Q&A: Spindle Dimensions of a 3500 lb Axle
- Search Results: dx22xr
- Q&A: 5 on 4-1/2" Idler Trailer Hub For Utility Trailer With 1-1/4" to 3/4" Tapered Spindle
- Q&A: Hub and Drum Assembly for 1 1/4 inch by 3/4 inch Axle
- Q&A: Replacement Hub with LM67048 Inner Bearing and LM11949 Outer Bearing
- Q&A: What Spindle Does Titan Trailer Hub # DX22XR Fit
- Video: Let’s Check Out the Dexter Trailer Hub and Drum Assembly
- Video: All You Need to Know About the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles
- Video: In-Depth Review of the Buyers Products Straight Tongue Trailer Coupler
- Video: Review of the Grease Seal SL150
- Video: All About the Timken Replacement Bearing and Race Set