Price: $142.55

zoom in icon
zoom out icon
pop out icon replay 360 icon
horizontal rotate icon

Product Images

spin image icon
curt trailer hitch custom fit 12000 lbs wd gtw receiver - class iv 2 inch
curt trailer hitch class iv 12000 lbs wd gtw 14055
curt trailer hitch class iv 1200 lbs wd tw 14055
curt trailer hitch class iv 12000 lbs wd gtw
curt trailer hitch custom fit 1200 lbs wd tw

In Use/Installed

2013 ford van trailer hitch curt custom fit 12000 lbs wd gtw 14055
2013 ford van trailer hitch curt class iv 12000 lbs wd gtw in use
2013 ford van trailer hitch curt class iv 12000 lbs wd gtw in use
2013 ford van trailer hitch curt custom fit class iv receiver - 2 inch
2013 ford van trailer hitch curt 12000 lbs wd gtw 1200 tw 14055
2013 ford van trailer hitch curt class iv 1200 lbs wd tw 14055
2013 ford van trailer hitch curt custom fit class iv in use
2013 ford van trailer hitch curt 12000 lbs wd gtw 1200 tw 14055
2013 ford van trailer hitch curt custom fit 12000 lbs wd gtw receiver - class iv 2 inch
2013 ford van trailer hitch curt class iv 12000 lbs wd gtw 14055
2013 ford van trailer hitch curt custom fit 1200 lbs wd tw in use
2013 ford van trailer hitch curt custom fit 1200 lbs wd tw receiver - class iv 2 inch
2013 ford van trailer hitch curt custom fit 12000 lbs wd gtw 14055
2013 ford van trailer hitch curt class iv 1200 lbs wd tw 14055
2013 ford van trailer hitch curt custom fit 12000 lbs wd gtw receiver - class iv 2 inch
2013 ford van trailer hitch curt class iv 12000 lbs wd gtw 14055
2013 ford van trailer hitch curt custom fit 1200 lbs wd tw in use

Customer Photos

curt trailer hitch custom fit 12000 lbs wd gtw 14055
curt trailer hitch custom fit 12000 lbs wd gtw 14055
curt trailer hitch custom fit 12000 lbs wd gtw 14055
curt trailer hitch custom fit 12000 lbs wd gtw 14055
curt trailer hitch custom fit 12000 lbs wd gtw 14055
curt trailer hitch custom fit 12000 lbs wd gtw receiver - class iv 2 inch

  • Curt
  • Class IV
  • 2 Inch Hitch
  • 1000 lbs TW
  • 10000 lbs GTW
  • Visible Cross Tube
  • Custom Fit Hitch
  • 12000 lbs WD GTW
  • 1200 lbs WD TW
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Lowest Prices for the best trailer hitch from Curt. Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" part number 14055 can be ordered online at etrailer.com or call 800-298-8924 for expert service.



Curt Trailer Hitch - 14055

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Made in the USA


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class IV
    • Maximum gross trailer weight: 10,000 lbs
      • Maximum GTW when used with weight distribution: 12,000 lbs
    • Maximum tongue weight: 1,000 lbs
      • Maximum TW when used with weight distribution: 1,200 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



14055 Curt Class 4 Trailer Hitch Receiver



14055 Installation InstructionsInstallation Details 14055 Installation instructions

This Product Fits The Following Vehicles

2004 - 2014 Ford Van E-150

2004 - 2014 Ford Van E-250

2004 - 2014 Ford Van E-350

2000 - 2003 Ford Van Full Size, including Superwagon



Video of Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Trailer Hitch Installation - 2014 Ford Van - Curt

Today is 2014 Ford van. We're going to review and install the Curt Class IV 2" receiver hitch, part number 14055. All right, this is what the hitch looks like when it's installed on the van. You can see the whole assembly does sit below the bumper. It's constructed out of square tubing. This is our 2" receiver opening right here and does have a built-in reinforcement around here, helps strengthen the end of the tubing. Go further in, we got 5/8" hitch-pin hole which is industry standard so it'll work with a regular conventional hitch-pin or your favorite locking hitch-pin. If we look on the bottom here, it has a steel plate and it has cutouts for your safety hooks.

This'll work with a wide variety of safety hooks out there. It goes up to the frame brackets right here where it goes up into the frame of the vehicle. This does come with all of the provider hardware needed to install and also it uses existing holes in the frame, so with this application no drilling was required. Now you can see your spare tire works just fine with the hitch as well. All right, now we'll go ahead and compare some of the capacities of the hitch. This will take 1,000lbs of downward force on the hitch and this will also pull 10,000lbs just as it is.

Now when you add a weight-distribution assembly the ton weight of the hitch goes up to 1.200lbs and the pull capacity goes up to 12,000lbs. You always want to double check with your owner's manual to make sure that your vehicle can handle these kinds of loads as well. Next we'll go ahead and use the measurements to help you out in selecting some accessories, such as a ball-mount, a bicycle rack or a cargo carrier. From the center of your hitch-pin to the edge of your bumper is going to be about 1-1/4". This hitch-pin hole is actually away from the bumper sticking out. Also, from top of the receiver opening down to the ground is going to be about 18". Right now I'll go ahead and show you how we install the hitch.

Okay, first part of our install is to actually get our van ready to install the hitch. That means lowering your spare tire either out of the way for now and put it up when you're done or, what we did is actually loosened it, pushed it as far forward as we can and then tighten it back up. Next we'll go ahead and plant locations where the hitch attaches to your frame. Now we're looking at the driver's side frame. You see it has a variety of slots which we use. These two and this one going towards the front of the van.

This is going to be the same on both sides of the van. Onto these holes we install the hitch hardware. This hardware does come with the hitch. This carriage bolt will go into the block and this assembly will go into the frame. That's it for our driver's side, we're going to do the same thing on the passenger side. At this point we can go ahead and lift our hitch into position, it's definitely a good idea to get an extra set of hands. We'll hold it up, we'll line up with the holes and then we'll install the flange nuts. I'm doing the two front and rear ones for now, I'm leaving that one loose. We need to add a washer between the hitch and the frame. This comes with a hitch as well, all I'm going to do is just pop it up, push the washer in, push the bolt back through and add a flange nut. Same thing applies on the driver's side. Now I've tightened down on hardware, we're going to need a 3/4" socket. Then we'll go and torque the bolts down as specified in the instructions. After that, that'll finish it for the Curt Class IV 2" receiver hitch, part number 14055 on this 2014 Ford van.


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" - 14055

Average Customer Rating:  4.9 out of 5 stars   (124 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

- 14055

by: Aa08/08/2014


I like the fact no drilling is required ,laying on the ground punching a 5/8 hole in 10 gauge frame is hard and this you just remove the skids and bolt on,it's much easier and saves time 145174


Comments

thanks I made 12 ,1200 mile trips towing with the hitch ,6 trips with a loaded trailer I would go from southern CA to almost Canada over many mountains bad weather early mornings late at night etc , I hit a deer and during which I slammed on the brakes with a loaded trailer on one of these trips,I had a very hard house project which I kept my trailer hitched up and used to take trash to the dump plus many short trips through bad traffic heavy braking etc etc ,I never had any problems ,the bolts are tight and the powder coat has held up well through all sorts of road conditions lots of rain and high heat,and dust ,I am very happy with the hitch ,you can also post this email to if you like thanks

Aa - 08/13/2015

14220

- 14055

by: Rick M.09/28/2015


Installed the hitch in less than 15 minutes. Instructions said allow about 35 which is very gracious. If I had another set of hands or help it would have been done in less than ten minutes. Etrailer is the right place for trailer and towing equipment they are very helpful with video's and product information. I recommend them to everyone I can because their service is top notch! 228262


Comments

The hitch is working great as every thing weve purchased from etrailer. A couple of weeks ago my father in law needed springs for his trailer and asked where the best place was to get them. My response was etrailer he ordered them and got them quickly. He had questions for you guys which were answered and made the whole process easier for him. We highly recommend etrailer to everyone we know.

Rick M - 10/14/2016

21512

- 14055

by: Lucus05/18/2016


I never post reviews. In preparing to make my purchase I was mildly "realistic" about all of the claims others had made. Believe the hype. The website was fantastic from providing recommendations to ease of ordering and the educational materials were pertinent and well thought out. My purchase arrived the second day with free shipping! It fit perfectly and, because I timed it, I can tell you that it took me 18 minutes from the time I walked outside until my Class IV/V hitch was installed was installed on my 2006 F-350 van. Customer service was absolutely phenomenal-Cathy T, Tamarra G, Lori B were always so prompt in getting back to me I had to look to see that they weren't over my shoulder and the fact that I couldn't figure out how to track my purchase meant nothing because they were there. With all of the tens of thousands of dollars I have spent on the internet this has been the purchase I will most remember as exceptional. Who would have thought? The only thing I would add to ease your installation is to make sure you have a 1/2" torque wrench handy to properly torque the hardware. 250678



- 14055

by: Lucus05/18/2016


I never post reviews. In preparing to make my purchase I was mildly "realistic" about all of the claims others had made. Believe the hype. The website was fantastic from providing recommendations to ease of ordering and the educational materials were pertinent and well thought out. My purchase arrived the second day with free shipping! It fit perfectly and, because I timed it, I can tell you that it took me 18 minutes from the time I walked outside until my Class IV/V hitch was installed was installed on my 2006 F-350 van. Customer service was absolutely phenomenal-Cathy T, Tamarra G, Lori B were always so prompt in getting back to me I had to look to see that they weren't over my shoulder and the fact that I couldn't figure out how to track my purchase meant nothing because they were there. With all of the tens of thousands of dollars I have spent on the internet this has been the purchase I will most remember as exceptional. Who would have thought? The only thing I would add to ease your installation is to make sure you have a 1/2" torque wrench handy to properly torque the hardware. 250677



- 14055

by: Rich S.07/17/2016


I am very happy with the Curt hitch I bought for my 2011 E350 Ford Van. My hitch was shipped very quickly and was a snap to install. Wiring also was very easy snap together with the Curt harness wiring kit. Both are top quality as expected based on the reviews I read on Etrailer I chose the Curt hitch over the Reese because it is MADE IN THE U.S.A. Apparently Reese and Draw-Tite are now made offshore. It used to be you could save money buying a product made in China, but not so anymore; The offshore "name brands" are both significantly more expensive. In my my opinion, I would much rather have a hitch welded by a guy in Wisconsin who would likely be pulling his own boat with one on the weekend than a kid in China making $2 a day that doesn't even know what he is building. And the only improvement I can think of on the Curt is that they should make the American flag logo bigger on the Curt sticker on the hitch. Curt is the new gold standard in my opinion! 273065


Comments

After one year I still love this product. paint still looks like new after a Chicago winter. As good or better than the factory hitch on my old van.

Rich S - 07/28/2017

26699

- 14055

by: Brian02/25/2014


The hitch was perfect. It went on a 2013 Ford E-250. Nothing had to be uninstalled. I just set in place and bolted it in. The whole thing took 15 minutes. Great product. Best of all, eTrailer got it too me very wuick. I ordered very late Tuesday (between 5 and 6PM, central) and it was delivered to me by 10AM on Thursday. Great job, eTrailer! 117576


Comments

Great product. No problems. I will shop eTrailer next time I look to purchase a hitch.

Brian - 02/25/2015

9760

- 14055

by: Jersey J.09/29/2015


Super easy install. I used to jack-stands to hold hitch in place. Laid on back and secured fasteners. Had to buy a torque wrench, went to HFT, did not realize etrailer.com carried them...woops! I bought the higher rated hitch for higher tongue weight rating, to be safe for hitch-mounted accessories. Great price, well packaged parcel, excellent experience! Thank you. 228349


Comments

Working out great. No rust at all.

Jersey J - 09/28/2016

21299

- 14055

by: lecurl12/31/2013


I have completed many transactions with etrailer { over ten} and I always received a quality product at a great price with speedy first class service. 111555


Comments

Still completely satisfied with my hitch as well as all the products I have used from etrailer. Great site for hauling and towing products.

lecurl - 12/31/2014

8296

- 14055

by: Jason08/12/2015


Very high quality bolted up perfectly! 218813


Comments

Hitch working perfectly

Jason - 08/11/2016

20169

- 14055

by: twiisted7109/20/2015


fits perfectly, easy to install. Several bolt plates weren't long enough to keep the bolts from turning so I had to go purchase REAL bolts with hex heads on them to finish my install. 226595


Comments

As usual with these hitches, Its great

twiisted71 - 09/19/2016

21075

- 14055

by: Lanuel Havice06/16/2015


This is a great company, there products are of high quality and will continue to buy from. 203847


Comments

Great, no problems wnd tow almost dailey. Very pleased with product and ill be buying more as needed.

Lanuel H - 06/15/2016

18613

- 14055

by: James Wold09/27/2016


Received the hitch yesterday and started right away to do the install. Read the instructions and seen that the two washers that came with the six nuts and bolts had to go between the van frame and hitch on the middle bolt. I placed all the bolts in the respected holes and lift one end of the hitch up and got two nuts started on it and then rise the other end up and install those nuts. From the time of pulling the hitch out of the box and tightening the last nut took me only 30 minutes. Now I have to wait for my 7-pin wire connecter show up and I can start my snowbird trip. 300341



- 14055

by: Cheryl M07/06/2016


I received this hitch with some chips down to the metal. So I repaired these. Alll holes lined up except one. The hitch was bent 1/2 inch on one side. So with a steel rod, wood blocks, and a pump jack, I bent the hitch into place. All the extra work is why I gave this hitch a 3 star rating. I now have a 5 star hitch that works great with my Thule bike rack. 268794



- 14055

by: Bret10/21/2016


Great hitch this is the second one I got front etrailer, easy to install only took 12 minutes and the price was right Thank you 309353



- 14055

by: Ben M.10/24/2013


Can't really rate the hitch yet except to say that installation was easy. I installed it in 25 minutes without a lift, using only a creeper, 3/4" torque wrench, and my impact drill. The hitch fits around the spare tire and is hidden away. Now for the good part: etrailer has to be as good as it gets in online shopping. Knowledgeable staff that noticed my original hitch wasn't in stock and suggested a suitable replacement that was $50 less. I will be back. 105046



- 14055

by: Kelly N.03/25/2014


I am very happy with the Curt hitch I purchased for my 2006 Ford E-350 van. It fit perfectly with no modification. It literally took me 10 minutes to install. I am also very impressed with the service and information available from etrailer.com. The numerous tutorial videos saved me a lot of money and gave me confidence to do the project (including wiring a 7 pin connecter and brake controller) myself. I highly recommend this company! 122264



- 14055

by: MJF03/15/2017


Thanks etrailer. Everything about this transaction was great. Easy to use website, great information and tutorial videos. Product arrived fast and installation was a snap, (less than 3 hours for hitch and wiring by myself). No drilling, cutting, wire splicing or frustrations, what a relief! I will definitely use etrailer again and recommend you to all my family and friends for their towing needs. You guy's ROCK! Keep on Towing! 356334



- 14055

by: mikeP06/06/2016


You guys are on top of the curve regarding quality of products and speed of delivery at reasonable costs. Got what i needed when i needed it!!! On top of that my 19 year old niece installed the hitch without assistance. I guided her along as my physical handicaps prevented my actual physical participation. She didn't even break here beautiful finger nails. Great instruction package and videos. Piece of cake!!! 257903



- 14055

by: Tony A.02/08/2015


I received my trailer hitch quickly and without shipping costs. All the hardware was included and it installed in less than 1/2 hour. The best part however, is that the price quote from the equipment provider in my area was $100.00 more than e-trailer. Add installation charge and I saved $220.00. Also the torque wrench needed for the installation was provided by an auto parts store free of charge. 172855



- 14055

by: G.W.07/24/2015


Good tow bar, better made than I really expected for the money....Easy to install, even on your back in the drive! If you don't have a spare set of hands to hold it in place, I used small bar clamps! Everything worked just like the on line video I watched before buying...I would recommend this to anyone who wants to tow the recommended weight and doesn't want to pay $500.00 at the local shop! 214085



- 14055

by: Michael08/11/2014


Super quick and clean install. With two of us, it took a very easy 5 minutes to get things setup. Everything seems solid and I'm not worried about anything coming loose or breaking. Also, I couldn't be happier with the customer service that came with the order. It's been top notch! -2000 Ford E-350 Super Duty Extended Van -Carrying a motorcycle hitch carrier with a 430 lb bike 146133



- 14055

by: Jonathan Martin04/16/2014


Installed easily with help from my neighbor. Looking back I could have done it myself if I would have put the bolts on loosely on one side the lifted the other side up. The hitch fit perfectly and looks to be high quality. I'm happy with it and don't think I'll ever max it out capacity wise. You never know though. Maybe one day I'll drag a bobcat around town. 125455



- 14055

by: Shawn B06/29/2014


I am very pleased with this product and the purchasing experience. The price was very competitive and delivery was quick. the installation video was detailed, yet easy to follow. It took less than 20 minutes to complete installation and I've had no problem with the hitch. I would recommend etrailer to anyone, and wouldn't hesitate to do business with them again. 138260



- 14055

by: Patrick D.05/03/2017


Wonderful! I have a 2005 E350 Super Duty Extended Body. I put it on myself with the help of my girlfriend. It was super super easy! I would suggest either having someone help you, or use something to steady the opposite side while you are attaching it. I used it to move across country with a big trailer. The thing just works great! No complaints. 375608



- 14055

by: Dan04/22/2016


I was very impressed. This hitch is made of quality materials and it fit perfectly on my Ford E350. They shipped all the mounting hardware and decent instructions. Took me maybe 20 minutes to bolt it on. I installed this hitch so that I could add a bike rack and am very happy with the results. A very good value for the money. 246469



- 14055

by: The RF Adapter Guy10/20/2014


Quite simple installation. No holes required. We didn't have to drop the spare tire. Install took about 10 minutes with single person. This was installed on a 2004 Ford E350 Diesel. This is not the first Curt hitch we ever installed, but the first on the E350 series. We've used Curt hitches on other Dodge vehicles in the past. 156905



- 14055

by: Dale Da NuToneMan05/16/2015


This baby fit perfectly. While laying on my back under the vehicle, I basically rested it on my chest and put in the center bolts first as they are near the center of gravity. Great hardware, by the way! I have a Ford E250 so no drilling or enlarging was required. Sorry E150 owners, you got a little more work ahead of you. 193644



- 14055

by: David M.12/15/2016


Very reliable receiver, well made, and easy to install. I have purchased many of these receivers from etrailer and the quick processing and shipping coupled with the great customer support (thanks Jennifer S.) is the reason why I continue to make them my first choice for any accessories for our fleet vehicles. 325080



- 14055

by: Adam A.01/02/2011


Ford E 250 Van I looked for a hitch online and found the etrailer.com had the cheapest price and decided to buy from them. Everything was as promised and the hitch and harness install was done within 25 minutes. One thing we did have to do was touch up 2 spots on the hitch but other than that it looks great. 4895



- 14055

by: Chad09/18/2015


Very easy to install. Took about 20 min after watching the you tube installation video on their website. Staff was very helpful in making sure my equipment was correct for my vehicle and got it shipped super fast in time for our trip a few days later. Would definitely do business them again! 226283



- 14055

by: AJA09/20/2013


Yes I'm a 2nd receiver in a year I bought from etrailer. 100% satisfied. Always got standard shipping and delivered within 3 working days. I prefer to purchase the no-drill hitch. Installed in 45 min. Perfect fit. Excellent products with excellent service. See no reason to go anywhere else. 100761



- 14055

by: Mike M.12/17/2014


Priced right. Good quality. etrailer salesperson a pleasure to deal with. 165851



- 14055

by: Mike02/15/2017


Had this hitch on my 2008 E350 for about a year. Have been very happy with it. Install was easy and works as expected. Fits close to the bumper which is a plus. Would recommend this hitch without reservations. Usual etrailer service which is always excellent. 342230



- 14055

by: SteveL11/12/2016


I have been very pleased with the hitch I bought and the customer service I received. I had a little trouble installing it but had help all the way through. I have been able to use it to safely tow trailers across the country for my work without incident. 316177



- 14055

by: Eric A..08/19/2011


I ordered about 5 products from you last week, mid week, and they were on my doorstep in perfect condition by Saturday! Nothing on backorder, and packed well into 2 boxes. Also, i appreciate the status emails and follow up. Thanks Etrailer, Great job! 22124



- 14055

by: Dubie 109/19/2012


I spent less than 20 minutes on the installation, but more importantly I could not believe the quality of the hitch, and powder coated to boot . No more Reese hitches for me. I would recommend Curt hitches to everyone!!! Thanks. H A Du Bois 55165



- 14055

by: Mike Gaucin So.Tx08/26/2016


Perfect fit!!..installed in 20min or so ... 287914


Comments

Still looks new!,and does the job well..100 all the way..

Mike G - 08/26/2017

27608

- 14055

by: SCOTTY M04/06/2012


Again, Alsome Responce Time. Got It Very Fast & Installed In 15 Mins. Just In Time For The Weekened! Thank You Very Much. This Is The 4th Hitch From etrailer & Very Satisfied Every Time. Definatly Won't Be My Last. THANKS AGAIN, SCOTTY. 36402



- 14055

by: Douglas03/19/2013


This hitch was about the easiest thing I ever did to my E-250 van. I watched the video fired up my air impact wrench and in less than 20 minutes this hitch was on my ride and ready to be put to work. Thanks E Trailer Doug B III 71602



- 14055

by: Mark P.01/30/2012


etrailer was great, had best prices,excellent communication until product was delivered and thereafter. Hitch was a very easy install only took 20 min. And was proud to see my Curt Hitch was made in USA ! Thanks Again etrailer! 30528



- 14055

by: Frances05/03/2016


Item was as described and arrived in short order, with tracking, even with free shipping. My purchase experience was very satisfactory. Good customer service. Installation video made the hitch installation a cinch. 248236



- 14055

by: Mr. Jacobs02/26/2017


Very well built product. I purchased for a 1 ton Ford van that only had a bumper hitch. Taking my time to clean the frame for securing the hitch, I was done within an hour. Excellent fit, solid construction. 346178



- 14055

by: Jeff P04/16/2014


Was very easy to install. All of the parts was included. I put it on myself with just a little help from my wife. If ever in the market again for another hitch will definitely order from etrailer again! 125581



- 14055

by: Tom S.09/06/2015


The entire process from ordering, shipping and installation was smooth with no surprises. The video on the wiring installation was very helpful. I could not have had a better purchase anywhere. Thanks. 224283



- 14055

by: Ron F.11/05/2014


I'm very happy with the hitch I recieved from etrailer. It was as stated, easy install, no drilling, tucked under bumper nicely. I would recommend this product. I used it for a full size Ford Van. 159376



- 14055

by: Kevin W.11/03/2016


The hitch installation on my 2008 Ford E250 was so easy. The instructions were easy to understand and everything connected up without a hitch. - get it? Pun intended. Thanks again eTrailer! 313258



- 14055

by: John B03/26/2017


Hitch was shipped quickly. Instructions were very clear. Super heavy duty product. I installed hitch by myself in less than an hour. Price was the best i found. The whole process went perfect. 361125



- 14055

by: Neil06/04/2016


Easy ordering online. Received inside of a week. Information said some drilling may be required. But I never had to drill anything. From box to mounting was 15 min.. You can bet I was happy 257251



- 14055

by: John l09/10/2017


Got my hitch right when it was suppose to be delivered. Bolted it up with no drilling. Took me about 15 minutes with an impact gun. Hitch is very rugged class 4 . Very satisfied with it. 430950



- 14055

by: Brad W06/21/2016


One great product. Bolted right on my E350 no drilling needed. Took only 10 minutes to install and was ready to start pulling my car trailer again. Great price and high quality. 263387


51
125
Show More Reviews


Ask the Experts about this Curt Trailer Hitch
Do you have a question about this Trailer Hitch?


  • Which Trailer Hitches Will fit a 2002 Ford E150 Econoline Van
  • There are several hitches available for your 2002 E-150 Econoline Van. I have posted a link below of all of the hitches available. I would recommend the Draw-Tite Trailer Hitch for the 2002 Ford Van, item # 75703. This hitch is economically priced and can tow up to 6,000 pounds or 10,000 pounds with a proper weight distribution system, if your van has sufficient towing capacity. If you need a hitch with more capacity the Curt Class IV Trailer Hitch, item # 14055, will install on your...
    view full answer...

  • Trailer Hitch and Wiring for a 2013 Ford E-350 Van
  • All of the trailer hitches we carry for your 2013 Ford E-350 van use 6 bolts to attach to the vehicle frame. The hitches are given their ratings based on several factors, including how they mount to the vehicle so having 6 bolts to mount a hitch does not diminish its rated capacity. But if you want an 8-bolt hitch none of the options we have use more than 6. The most popular hitch for your van is Curt hitch # 14055 rated for 1,000 pounds tongue weight and 10,000 pounds gross trailer...
    view full answer...

  • Recommended Receiver Hitch and Trailer Wiring Harness for 2007 Ford E350 Van
  • The highest rated hitch available for your 2007 E350 would have a 10000 lb towing capacity. With the use of a weight distribution system, the capacity can be increased to 12000 lbs. I would recommend the Curt Class IV Receiver, part # 14055, which will use existing holes in the van frame. We offer the wiring harness with trailer connector, draw bar and trailer balls to complete your towing system, but they are not sold as part of a package. I would recommend the following: Wiring...
    view full answer...

  • Hitch Recommendation for a 2005 Ford E350 Ambulance
  • I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body van like your 2005 Ford E-350 ambulance are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
    view full answer...

  • Hitch Recommendation for a 2006 Ford E350 Cutaway
  • For a rear mounted hitch for your 2006 Ford E350 I would recommend the Curt Hitch part # 14055. I attached an install video for you to check out to the right. For trailer wiring you would want the part # C56020. For ball mounts I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag. If you were looking for a front mounted hitch instead you would want the part # 33055.
    view full answer...

  • Trailer Hitch and Trailer Wiring for 2009 Ford E-350 with Backup Sensors
  • We do indeed have hitches and trailer wiring for your 2009 Ford van that will allow you to retain your backup sensors. TowReady wiring harness # 118551 will plug in at your van taillights without need to cut or splice into the vehicle's wiring. The only other connection required for this powered converter is for its 12V power wire which will run up to the engine compartment for connection to the battery through the included fuse holder - please refer to the linked article for guidance....
    view full answer...

  • Will a Trailer Hitch Fit a 2006 Ford E-350 Van with a Knaphiede KUV Body
  • If the utility body on your 2006 Ford E-350 van chassis does not sit any lower relative to the frame than on the regular van models you can install a trailer hitch. For example Curt trailer hitch # 14055 will work as long as the bolt holes on the frame where the hitch installs are 38-5/8 inches apart on center. I have linked a video showing an example installation for you. The same goes for hitch # 41945 and # 41906 and a few other hitches for your year E-350 (see link). If the...
    view full answer...

  • Which Trailer Hitches, Accessories, and Wiring Fit a 2008 Ford E-350 Van
  • I read through the instructions for the Draw-Tite hitch, # 41546, and while it does mention the E-350 a couple of times, I cross referenced your 2008 Ford E-350 with the Draw-Tite catalog and fit guide I have. This hitch was not recommended for the E-350 as there are hitches that are a more ideal fit for the E-350. For your 2008 Ford E-350, I recommend the Draw-Tite Hitch, # 41926. This is a Class IV hitch with 1,000 pounds of tongue weight capacity and 10,000 pounds gross trailer weight....
    view full answer...

  • Hitch Recommendation for a 2006 Ford E-150 Van
  • I checked with Curt and the Curt Trailer Hitch part # 14055 that you referenced is confirmed to fit your 2006 Ford E-150. I attached installation instructions and an installation video for this hitch for you to check out as well. To complete your towing setup you may also be interested in the following products: etrailer Ball Mount kit # EBMK2216 Draw Tite Trailer Wiring # 18252
    view full answer...

  • Trailer Hitch Recommendation for a 15 Passenger 2010 Chevy Express Van
  • The Curt trailer hitch # 14090 fits all full size versions of the 2010 Chevy Express Van. I have included a link to a video showing a typical installation for you and a link to the installation instructions. If you plan on doing some towing I recommend the etrailer ball mount kit # EBMK2216. It comes with 2 balls, a ball mount, hitch pin with clip, and a carrying bag. For trailer wiring use # 118392. I have included links to the installation instructions and a video for the wiring as...
    view full answer...

  • Trailer Hitch, Wiring, and Brake Controller Recommendations for a 2014 Ford E-350 Van
  • The most popular and one of the more inexpensive Class IV trailer hitches for your 2014 Ford E-350 passenger van is # 14055. I have included a link to a video showing an example installation. I also recommend etrailer ball mount kit # EBMK2216 which includes a ball mount with a 1 inch rise or 2 inch drop, a 2 inch and 2-5/15 inch ball, hitch pin with clip, and a storage bag. For trailer wiring I recommend # 118551 to add a 4-Way flat connector to the rear of the vehicle. If you need...
    view full answer...

  • Will Curt Trailer Hitch # 14055 Fit Around the Spare Tire on a 2010 Ford Full Size Van
  • I spoke with my contact at Curt regarding trailer hitch # 14055 for your 2010 Ford Full Size Van. She stated that it will fit around the spare tire when installed. I have included a link to the installation details below as well as a video showing installation on a similar vehicle. If you plan on doing some towing, the recommended ball mount is # 40330 and hitch ball # A-90 (2 inch diameter) or # 19286 (2-5/16 inch diameter). For trailer wiring, use # 118551, or if you have the factory...
    view full answer...

  • Towing Capacity and Trailer hitch Recommendation for 2007 Ford E-350 RV Cutaway
  • I checked the owner's manual for the 2007 Ford E-350 vans. There are several configurations of the cut away models. 138 inch wheelbase, 9,600 pound gross vehicle weight rating, single rear wheels: 5.4 liter motor 8,100 pound towing capacity 6.8 liter 10,000 pound towing capacity 138 inch wheelbase, dual rear wheels, 10K gross vehicle weight rating: 5.4 liter 7,900 pounds 6.8 liter 10,000 pounds 158 inch wheelbase, dual rear wheels, 10k gross vehicle weight rating: 5.4 liter...
    view full answer...

  • Hardware Included for Installation of Curt # 14055 Hitch Installation On 2004 Ford Van
  • Yes the Curt Class IV Trailer Hitch, item # 14055 includes all necessary hardware, bolts, washers and spacers needed for installation. I have included a link for install instructions for you to review. Some items you may need with the Class IV hitch are listed below. Wiring # 119178KIT Drawbar # 40330 Hitch Ball # A-90 or # 19286 or # 63836 Hitch Lock Kit # 7685
    view full answer...

  • Trailer Hitch and Wiring for a 2006 Ford E-250 Van
  • For a trailer hitch for your 2006 Ford E-250 van the most popular option is Curt Class IV hitch # 14055. I have included a link to a video that shows how the hitch installs. Installation will be nearly identical on your E-250. If you plan on doing some towing you might be interested in etrailer ball mount kit # EBMK2216. It comes with a ball mount with a 1 inch rise or 2 inch drop, interchangeable ball set, hitch pin with clip, and a storage bag. If the ball mount kit does not have...
    view full answer...

  • What is the Mounting Hole Spacing on Curt Class IV Hitch # 14055
  • I went to our warehouse and measured Curt Hitch # 14055 to get you the mounting hole dimension you requested. The mounting hole spacing on the two flanges is 38-1/4-inches. The overall edge-to-edge spread at the two flanges is 40-inches.
    view full answer...

  • Trailer Hitch and Wiring for a 22 Passenger Bus Built on a 2002 Ford E-450 Van Chassis
  • There are no confirmed trailer hitch fits for the E-450 cutaways but I do have a solution that could work for you. You can use a weld-on heavy duty truck hitch # 41990. Then you can use 7 inch brackets # 4907, or 16 inch brackets # 4916. This requires a qualified professional welder for installation. For a wiring harness you could use universal harness # 119179KIT. This is a powered wiring harness meaning it gets the power for the trailer lights form the vehicle battery. This helps protect...
    view full answer...

  • 2 Inch Trailer Hitch Receiver Options for 2013 Ford Econoline Van
  • Thanks for returning to etrailer.com for your towing needs. You basically have six different options when it comes to a trailer hitch for your 2013 Ford Econoline Van. Class III with 2 inch receiver, Curt # 13055 and Draw-Tite # 75703, both with 600 lb tongue weight capacity and 6,000 lbs towing. Class IV with 2 inch receiver, Curt # 14055 and Draw-Tite # 41906, both with 1000 lb tongue weight capacity and 10,000 lbs towing. Class V with 2 inch receiver, Draw-Tite # 41945 with...
    view full answer...

  • Will Curt Hitch 14055 Fit a 2011 Ford E-350
  • Yes, the Curt hitch part # 14055 that you referenced is a confirmed fit for your 2011 Ford E-350 Super Duty. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not include a ball mount with the right rise or drop...
    view full answer...

  • What Is Mounting Hole Spacing Dimension for Curt Class IV Hitch # 14055
  • Curt Class IV hitch # 14055 has mounting holes on its flanges that are indeed spaced at 38-1/4-inches apart measured on the hole centers. The overall width of the hitch, measured outside edge to outside edge at the mounting flanges, is 40-inches. Mounting hardware is included. I did review the product description and the installation instructions but I did not find the reference to cutaway chassis fits. Those instructions are linked for you. This hitch is a confirmed fit for the 2006...
    view full answer...

  • Will Curt Class IV 2 Inch Hitch # 14055 Fit a 2001 Ford E-350 XLT Van with a Full Size Spare Tire
  • The installation instructions for the Curt Class IV 2 Inch Hitch, part # 14055 on the 2001 Ford E-350 XLT Van does not indicate any problem with a full size spare underneath the vehicle. If the vehicle comes with the full size spare located underneath the vehicle from the factory you should have no problems installing the Curt hitch. I am including a link to the installation instructions on the Curt hitch and a link to a video of the Curt hitch being installed on a 2001 Ford E-350 van....
    view full answer...

  • Diversi Tech Adjustable Ball Mount Recommendation for a 2006 Ford Van
  • The most popular ball mount for the Curt Hitch # 14055 is the Forged Ball Mount # 40330 which has a distance of 8-1/2 inches from the center of the hitch pin hole to the center of the ball hole. While the Diversi-Tech Adjustable Ball Mount # DTSTBM6400 has the same distance of 8-1/2 inches. Based on that you should have no problem using a # DTSTBM6400.
    view full answer...

  • What Hitch will Fit a 2003 Ford E-350 Cutaway Chassis
  • The Curt hitch part # 14055 will fit the cutaway models of the 2003 Ford E-350 if the bolt holes on the frame of the van are 38-5/8 inches apart on center. I attached an install video for you to check out as well.
    view full answer...

  • What are the Differences Between Curt and Draw-Tite Hitches for a 2009 Ford E-250.
  • There are several Curt and several Draw-Tite hitches available for a 2009 Ford E-250, depending on which model E-250 you have. Is your van a Superwagon? How much weight are you needing to pull? This information will help narrow down the hitches that will fit your van and we can look at the differences between those specific hitches.
    view full answer...

  • Hitch Availability for 2012 Ford E350 Super Duty Cargo Van
  • We do offer several different 2-inch hitch receivers for your 2012 Ford E350 Super Duty Cargo Van and all can be seen on the link provided. The available hitches include options with Class III, Class IV and Class V ratings. The most popular hitch for your vehicle is the Curt # 14055 which has a substantial tongue weight rating (downward force on the hitch) of 1000-lbs and a maximum gross trailer weight rating of 10,000-lbs. This hitch will have plenty of extra safety margin for your...
    view full answer...

  • Hitch And Towing Components Recommendation For 2003 Ford E-350 Van To Tow 37 Ft Trailer
  • You will want to check the owner's manual or with your dealership to make sure you do not exceed the towing capacity for your van. For your 2003 Ford E-350 I recommend the Draw-Tite Ultra Frame Hitch, part # 41906. This is a Class lV hitch and it has a 2 inch receiver opening. The ball mount kit I recommend is the etrailer Ball Mount Kit, part # EBMK2216. This kit includes a ball mount with a 1 inch rise or 2 inch drop, a 2 inch and a 2-5/16 inch trailer ball, the pin and clip, and...
    view full answer...

  • Hitch-Mounted Folding Cargo Carrier for 2006 Ford E-350 Van
  • We can help you select a folding 2-inch hitch-mounted cargo carrier for use on your 2006 Ford Van. The linked page will show you all such carriers. For a carrier that provides a good match to your hitch you'll want to check the tongue weight (TW) rating of the hitch on the van. This should be noted on it's safety/warning sticker. The total combined weight of the carrier itself plus your loaded cargo cannot exceed the TW limit of the hitch. For a large heavy-duty carrier I suggest...
    view full answer...

  • Availability of Rear Hitch for 2014 Ford E350 Van
  • We do offer 2-inch rear-mount hitch receivers (and front-mount hitches too, by the way) that will fit your 2014 Ford E350 van. You can see these by clicking on the link provided. These 2-inch hitches are offered in varying capacities and carry Class III, Class IV and Class V ratings. Note also that some are no-drill installations, such as Curt Class IV # 14055. The highest-rated hitch option comes from Draw-Tite, their Ultra Frame Trailer Hitch Receiver # 41945, which is a no-drill install...
    view full answer...

  • Hitch, Wiring and Brake Controller Installation Parts for 2011 Ford E-350 Van
  • You are on the right track! The Curt Class IV hitch # 14055 and 4-pole wiring harness # C56020 that you referenced are correct fits for your 2011 Ford E-350 van. Install videos for both items are linked for you. When you're ready for a brake controller such as the popular and reliable Prodigy P2 # 90885 all you'll need is our brake controller install kit # ETBC7. This kit has everything you'll need to install the controller, including the 7-way connector, wiring and circuit breakers....
    view full answer...

  • Can a Trailer Hitch be Installed on an RV Built on a 2007 Ford E-350 Chassis with Rear Propane Tank
  • Hitch manufacturers do not test custom fit hitches on RV cut away models because there are too many different bodies that could be put on the chassis for them to test them all. Your best option would be to use a weld on hitch, see link, or have something fabricated using some of the hitch fabrication parts we carry, also linked. Welding should be performed by a qualified professional welder who can guarantee the hitch capacity once fabricated and/or installed. When welding to the vehicle...
    view full answer...


Do you have a question about this Trailer Hitch?





  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Test Fit:
Joe V
Expert Research:
Michael L
Video Edited:
Zack K
Video by:
Andrew K
Written by:
Lindsey S
Test Fit:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Video Edited:
Joshua S
Test Fit:
Nicholas E
Video Edited:
Jacob T
Expert Research:
John H
Video Edited:
Andrew L
Expert Research:
Adam R
Video by:
Kathleen M
Video Edited:
Mike H
Video Edited:
Dustin K
Video Edited:
Sue W
Video Edited:
Chris R
Test Fit:
Jared G
Updated by:
Amanda M
Video Edited:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.