Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2"
(106 reviews)
Price: $248.72
In Stock
Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2"
Item # 41990-07
Retail:$426.22
Our Price: $248.72
You Save: $177.50
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (106)
- Q & A (0)
- Photos
Draw-Tite Heavy Duty Receiver Hitch - 41990-07
- 2 Inch Hitch
- 16000 lbs GTW
- Weld-On
- 44 Inch Wide
- Class V
- Draw-Tite
- 1600 lbs TW
- 7 Inch Drop
Universal-fit trailer hitch fits heavy-duty and commercial vehicles with frames up to 44". Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. 7" Tall, weld-on mounting brackets included.
Features:
- Universal-fit trailer hitch lets you tow a trailer with your heavy-duty or commercial vehicle
- Designed for full-size trucks with long wheel bases and heavy-duty suspensions
- Computer-aided steel construction ensures strength and durability
- Oversize safety-chain loops are easy to access
- Tested Tough - safety and reliability criteria exceed industry standards
- Weld-on installation with included side brackets
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Cross tube dimensions: 44" wide x 3" deep x 3" tall
- Receiver opening: 2" x 2"
- Rating: Class V
- Maximum gross trailer weight: 16,000 lbs
- Maximum tongue weight: 1,600 lbs
- Not for use with weight distribution systems
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
41990-07 Draw-Tite Ultra Frame Service Body Receiver with 7" Bracket - Universal - Class V - 2"
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" - 41990-07
Average Customer Rating: 4.8 out of 5 stars (106 Customer Reviews)
Universal-fit trailer hitch fits heavy-duty and commercial vehicles with frames up to 44". Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. 7" Tall, weld-on mounting brackets included.by: Scott06/12/2023
The product is awesome, but the order was shipped in complete. I was informed that a similar hitch receiver to what I originally ordered was in stock and ready to ship instead of waiting for the one that was ordered. Only $XX more, no biggie right? I got the brackets in a couple of days but NO cross bar. They shipped it out and by the time I got it, it was basically the same time frame as the original order would have taken and I spent $XX more. Not real happy with the shipping side of things with etrailer.
by: Robbie 10/20/2023
Great universal fit. Weld in was easy and it’s the perfect size for my Freightliner step van. Sturdy, well made product.
by: Dillon VZ10/09/2017
Hitch came on time and was easy to install being a weld on hitch. Was a good choice for my flatbed as the truck has a frame extension on it from a service box which meant a factory type hitch was not a option. Looking forward to using it more and not having to worry about hitch failure.
by: Carl 09/05/2023
9 out of 10 times e-trailer gets it 100 percent right.
by: Andy05/14/2018
etrailer's staff was very helpful in evaluating options for my situation. This hitch works perfectly with my Class C Motor home (RV)
by: Mark R02/19/2012
The hitch is well built. Having 4 wheel drive it gave me the flexablity I needed to mount to the front of my motorhome. I use to carry my cooler rack for surf fishing.
by: CAPTAIN C03/04/2014
Product was exactly what was needed for our unique application. Required very little modification to fit our fire truck. Thanks
by: Philip 11/30/2021
I like the fact that it is adjustable.
by: Traci 06/16/2020
I purchased a class c motor home and found out after the purchase that the trailer hitch was only for supporting a basket up to 150 lbs. I needed a REAL trailer hitch. Etrailer.com sent me a wonderful hitch - the fabricator that installed it was very pleased with it, it pulls my truck with no worries, it was a reasonable price and came within a week of ordering. I love it, just what I needed - Thank you
Traci
6/17/2021
It is a blessing. Very good product. Thank you still
by: John 12/22/2019
The trailer hitch from eTrailer arrived quickly. It is a robust hitch with plenty of towing capacity. I have a GMC box truck and will be using it to tow a utility trailer from New York to Arizona. Tow hitches for box trucks are hard to find. This one has a tow capacity of 16,000 lbs. I am pleased with the quality of the unit. I will gladly recommend eTrailer to others.
John
12/23/2020
Excellent
by: Kerri09/18/2022
Excellent service! Super fast shipping and the product was perfect for our Blue Bird Vision School Bus coversion! Thanks etrailer.com!!
by: BC12/06/2022
Solid product, the installation was straight forward.
by: Carl 06/28/2023
works well
by: Russ F.11/21/2016
I was looking for a hitch for our Ford E 450 shuttle bus. Not have much luck with local hitch installers.( The problem with the E 450 its frame is wider then the F models) I looked at some blogs and found out about etrailer found the 41990-07 hitch. Put it on had a local shop weld up the ends works great! I would highly recommend etrailer they called me to confirm the order and then when the order was shipped very happy with there products!
Thanks !
by: Q Fuller07/15/2019
This was a good purchase, but it ended up too high. The dimensions on this product were clear, but I couldn't decipher the dimensions on the deeper drop products. This one is fine, but if you want to tow a regular trailer behind a tall truck you should probably get a bigger drop on the hitch.
As it is, I'll have to raise the trailer to use this appropriately.
by: Brandon10/10/2021
Needs a few more details included on the website in regards to dimensions. A few detail drawings would help. Would make it a lot easier when trying to decide which and what plates are needed for your specific set-up. In case there are differences for example maybe I have a truck with a service bed but it was fitted after market and it isn't like it would be from the factory.
Sierra K.
10/18/2021
We do have a diagram on the product page but if there were any measurements that were missing that you needed, please let me know and I will have them added. Here is also an expert answer that gives a visual of the hole spacing on the brackets:
Helpful Links
by: Kevin03/29/2019
Very good place to shop got the hitch I wanted for a great price fast delivery nothing to complain about the hitch is already installed and all the accessories that I was looking for that had them in stock fast shipping I give them an a+
by: Dave R.05/24/2017
I have not installed this yet but it is very stout / well made and installation seems very straight forward. This is not the first thing I have purchased from etrailer and it for sure won't be the last. Great selection of products and OUTSTANDING customer service.
by: Gary 12/29/2021
Great company to deal with. Product was exactly what I needed for a custom installation, easy to install and works well.
by: Jonny 07/17/2021
Worked perfectly on a 3500 mile cross country trip. No issues at all towing an 87 Bronco.
by: Andrew 09/11/2021
Hi
I’ve received the hitch but didn’t have time to get it install. Etrailer was very helpful with all the question I have, there support team was great.
THANK YOU
by: Robert08/27/2021
The perfect solution for my 2015 Ford Transit converted mini school bus. FYI, the factory hitch will NOT work on these.
by: Benjamin 07/17/2021
Shiped extremely fast. Got here in time and as ordered. Installed it today no problem.i would recommend it.
by: Emmet06/02/2021
super duty and just want i ordered shipped well.
25
106
Show More Reviews
See what our Experts say about this Draw-Tite Heavy Duty Receiver Hitch
- Hitch Tube Recommendation for Fabricating Hitch to RVIf you are planning on having a crossmember welded to the frame of your trailer you would be best off just having the part # 41990 welded to the frame as that has the hitch opening already welded to it. Or we have the part # 41990-07 which has the hitch attached to drop brackets.
view full answer... - Recommended Class V Hitch For A 2020 Ford F53 ChassisWe do have a couple Class V hitch options available for your 2020 F53 and I have 3 options listed below. These will all be rated to 16,000 pounds towing and 1,600 pounds of tongue weight and use a 2" receiver opening. They will all also fit a frame that is up to 44" wide, so they will have absolutely no problem fitting the 34" wide frame of your F53. Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Cross Tube # 41990 Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver...
view full answer... - Is There a 10K Trailer Hitch for a Forest River Legacy MotorhomeI do have an option for you but most trailer hitches designed for motorhomes max out at 5,000 lbs. That said, there are options for a higher weight capacity but it won't be as simple as bolting it on as they require welding, the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-07 is our best option for this and we do recommend professional installation. Please note, the existing trailer hitch will need to be removed and the new trailer hitch will then install on...
view full answer... - How To Confirm Fit of Draw-Tite Ultra Frame Service Body Trailer Hitch ReceiverThe Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-07 will work on pretty much any motorhome chassis so long as the chassis does not exceed 44" in width from the outside of each frame rail. It can be attached via either drilling or welding.
view full answer... - Trailer Hitch for a 1977 Jeep Gladiator J10 Pickup TruckSince there are no custom fit trailer hitches for your 1977 Jeep Gladiator (J10) you will want to look at the selection of weld-on truck hitches such as # 41990-07. You will need to determine the overall width of the Jeep frame from outside to outside and the how much space there is from the bottom of the frame down to clear the lower part of the rear bumper. It is possible that hitch # 41990-07 will work for you. This hitch fits frames that are up to 44 inches wide. The brackets are...
view full answer... - Dimensions and Hole Spacing for Brackets in Draw-Tite Service Body Trailer Hitch Receiver 41990-07I will be happy to provide you with the dimensions and hole spacing on the brackets included with trailer hitch # 41990-07 to see if it will work on your cab and chassis 2004 Ford F-550. I have included a picture with the measurements.
view full answer...
- Recommended Bolt On Hitch for a 2001 International School BusThe best option to add a hitch to your 2001 International School Bus is going to be the Draw-Tite Ultra Frame Service Body Trailer Hitch item # 41990-07 you were looking at. This hitch has the option to be bolted on not welded. I have linked the installation instructions below so you can see the requirements and decide whether or not this will work for you. This hitch fits frames that are up to 44" wide so it's perfect for your application.
view full answer... - Recommended Replacement Trailer Hitch for a 2004 Jayco GreyhawkThe Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-07 should be an excellent option for a 2004 Jayco Greyhawk based on the provided measurements. It is a universal hitch rated up to 16,000 lbs which will far exceed most motorhome's towing capacity. In regards to installation, it can be attached to pretty much any frame so long as the width from outside to outside is no more than 44" which you appear to be under so you will be good to go. The brackets would then allow...
view full answer... - What Is The Tongue Weight Capacity Of the Draw-Tite Trailer Hitch Receiver # 41990-07?The Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 is capable of supporting up to 1,600lbs of tongue weight. I do recommend verifying that the weight of your bike and the carrier does not exceed the capacity of the receiver and will not exceed the GVWR for your chassis.
view full answer... - Universal Hitch to Install on a Class A RV Rated for 10,000 PoundsWe do carry universal hitches that are rated for 10,000 pounds and above, like the Draw-Tite part # 41990-07. I've linked the selection. With that being said a lot of times when a motorhome is rated for 5,000 pounds towing it isn't the hitch that's the limiting factor. I suggest making sure the Class A you purchase is rated for towing up to 10,000 pounds because if it's not adding a higher rated hitch isn't going to help you at all.
view full answer... - Can The Draw-Tite Ultra Frame Trailer Hitch Receiver # 41990-07 Be Installed With Bolts? Yes, the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 can be bolted on rather than welding. This will require you to drill the appropriate 5/8" bolt holes in your frame. You must install at least 4 bolts in each side of the frame with the top 2 holes being mandatory holes that must be used and allowing for you to choose 2 of the bottom 3 holes for the remaining 2 holes. You will need to supply your own grade 5 or stronger bolts as these are not included with the...
view full answer...
- Recommended Class V Heavy-Duty Trailer Hitch Receiver for a 1997 GMC Bluebird School BusI've linked our selection of heavy-duty truck trailer hitch receivers for you. You'll need to find one that fits the frame of the 1997 GMC Bluebird. For example the Draw-Tite # 41990-07 fits frames up to 44 inches wide. They're all Class V weld-on trailer hitches.
view full answer... - Can a 10,000 Pound Trailer Hitch be Installed on a 2015 Allegro RED RV on Freightliner Chassis If the Freightliner chassis is a Sprinter then none of the hitches available, see link, are rated for 10,000 pounds. They max out at 7,500 when using weight distribution. You will also want to consult the vehicle owners manual for the towing capacity because it the vehicle is not rated for 10,000 pounds it won't matter if a hitch is rated that high. You always go by the lowest rated component in the system. If the vehicle can handle 10,000 pounds then you will have to get a weld-on truck...
view full answer... - Trailer Hitch Receiver for 1999 Ford E-450 Shuttle BusThere is going to be a trailer hitch receiver option you can weld onto the frame of your 1999 Ford E-450, so long as it has a frame up to 62 inches. What you can use will depend on the amount of drop you need, as the hitches have different height brackets: - 7 Inch Tall Brackets: Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 - 16 Inch Tall Brackets: Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16 I have added links to the instructions for these...
view full answer... - Recommended Trailer Hitch for Ford E-450 Box TruckI do have an option for you though there aren't custom fit hitches for box trucks. The frame is not really the issue but rather the body the up-fitter adds on which could hang down below the frame where the hitch mounts or actually use the holes in the frame for the hitch. Therefore, you will either need to drill or weld on one like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-16 or part # 41990-07.
view full answer... - Width of Ultra Frame Weld On Class IV Hitch ReceiverI called the manufacturer and part # 41990, will accommodate up to a 44 inch frame. We also have part # 41990-07 and 41990-16 which are both 44 inches wide with different size mounting brackets if these would fit your application.
view full answer... - How to Choose a High-Low Adapter for a 2014 GMC TerrainThe best way to get the tow bar level is with a high-low adapter, not a low hanging trailer hitch. This is going to improve ground clearance immensely which can be an issue on certain motorhomes. In order to determine the correct high-low adapter for your 2014 GMC Terrain you will need to measure from the ground to the center of the base plate kit on the vehicle and compare that distance to the measurement from the ground to the top of the inside edge of your trailer hitch on the motorhome....
view full answer... - Recommendations For Trailer Hitch On A 1998 Ford E-450 RV CutawayTo find a trailer hitch that will work well on your Cutaway I recommend a weld-on trailer hitch. You will need to take a measurement to make sure you have clearance. You will need to measure the distance between the frames to make sure it is less than 44-inches. You then need to measure from the top of the frame downward to the bottom of the bumper or step bumper if that is what you have, to make sure the receiver opening clears it. If that distance is 5-9/16 inches or less, then part...
view full answer... - Availability of High Capacity Weld-On Hitch for Class C Motorhome on Ford E450 Cutaway Van ChassisWe might have a solution for you, but you'll need to do some measuring at the rear of your motorhome to see if it will work. The Draw-Tite # 41990-16 is a Class V hitch, which has a GTW capacity up to 16,000 lbs and a tongue weight capacity of up to 1600 lbs, when correctly installed exactly according to the instructions. In order to determine if this hitch would work for you, the outside to outside dimension between your frame members needs to be less than 44 inches. You'll also need...
view full answer... - Determining Which Universal Trailer Hitch receiver Fits A 2001 VanHool C2045 Bus Converted To An RVThe correct trailer hitch receiver for your 2001 VanHool C2045 bus to RV conversion is going to be dependent on the width of the frame and how far below the frame the rear bumper is. The # 41990-07 you were looking at has 7" tall mounting brackets, so as long as the bumper does not hang down farther than 7" this would work perfectly. If you need a hitch with taller mounting brackets then I recommend the # 41990-16 which has 16" wide mounting brackets. Both of these hitches will fit frames...
view full answer... - How To Upgrade the Trailer Hitch On a Class C Thor MotorhomeIn order to replace the trailer hitch on a motorhome you will need to go with a universal hitch as they do not offer bolt-on options for this. I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-07 or part # 41990-16 which can be bolted/welded to the trailer frame rails. The Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver then has a 16,000 lb weight capacity so it will be plenty for your horse trailer.
view full answer... - 1993 Chevrolet P30 Trailer Hitch OptionFor an RV application the # 41990-16 is an option as this is a great multi-fit hitch typically used for service body trucks. Since we know that the P30 chassis has 34 inches between the frame rails this hitch should fit just fine since it has 16 inch drop brackets that can weld anywhere on the 44 inch wide crossbeam of the hitch. If you needed a hitch with less drop in the mounting brackets the part # 41990-07 has a bracket height of 7 inches instead.
view full answer... - Recommended Trailer Hitch Receiver for 2002 38 Foot Freightliner BusWith a 34 inch frame I suggest the Draw-Tite # 41990-07. It will fit frames up to 44 inches wide. It's a 2 inch, Class V hitch receiver with 7 inch brackets. If you need more drop instead use # 41990-16 which has 16 inch brackets. Both hitches require welding for installation. I recommend the work be performed by a certified experienced welder.
view full answer... - Hitch Option For 2008 International 4400 AmbulanceWhile there isn't a custom fit trailer hitch for your 2008 International 4400 ambulance, there may be an option for you with a weld-on hitch. It just depends on the width of your frame, and one with the correct drop. - 7" Tall Brackets, 44" Wide Crosstube: Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 - 16" Tall Brackets, 44" Wide Crosstube: Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16 I have added a link below to the install instructions...
view full answer...
Do you have a question about this Heavy Duty Receiver Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Hannah L
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Philip
12/1/2022
outstanding