1. RV and Camper Hitch
  2. Draw-Tite
  3. Frame Mount Hitch
  4. 24 - 46 Inch Wide Frame
  5. 500 lbs TW
  6. Bolt-On
Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide

Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide

Item # 5350
lowest price pledge
Retail:$405.41
Our Price: $229.50
You Save: $175.91
RV and Camper Hitch
This item qualifies for Free Shipping
Shipping Weight: 46 lbs
Quantity: 
In Stock
Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide 5000 lbs GTW 5350
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Simple, 3-piece construction makes assembly and installation fast and easy. No welding required. Attachment hardware included. Has 2" receiver tube that accepts all standard utility ball mounts, providing ball height adjustment for level towing. Lowest Prices for the best rv and camper hitch from Draw-Tite. Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide part number 5350 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (15)
  • Q & A (53)
  • Photos
  • Why etrailer?

Draw-Tite RV and Camper Hitch - 5350

  • Frame Mount Hitch
  • 24 - 46 Inch Wide Frame
  • 500 lbs TW
  • Bolt-On
  • Draw-Tite
  • 5000 lbs GTW
  • 2 Inch Hitch

Simple, 3-piece construction makes assembly and installation fast and easy. No welding required. Attachment hardware included. Has 2" receiver tube that accepts all standard utility ball mounts, providing ball height adjustment for level towing.


Features:

  • Multi-fit motor home hitch fits motor homes (RVs) with chassis from 24" to 46" wide
  • Black powder coated steel resists rust and corrosion
  • Simple 3-piece construction makes assembly and installation fast and easy
    • No welding required
    • Hardware included
  • J-Pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Maximum gross trailer weight:
    • 5,000 lbs Weight carrying
    • 6,000 lbs With weight distribution
  • Maximum tongue weight:
    • 500 lbs Weight carrying
    • 750 lbs With weight distribution
  • Limited lifetime warranty


Note: This is a general application product, and it is the responsibility of the installer to select a structurally safe location for attachment.


Dimension

5350 Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide

Replaces 36010

Replaces 82200

Installation Details 5350 Installation instructions


California residents: click here



Customer Reviews

Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide - 5350

Average Customer Rating:  4.8 out of 5 stars   (15 Customer Reviews)

Simple, 3-piece construction makes assembly and installation fast and easy. No welding required. Attachment hardware included. Has 2" receiver tube that accepts all standard utility ball mounts, providing ball height adjustment for level towing.

- 5350
by:

Great service from etrailer, super fast shipping. Nice Hitch, easy install, took about 4 hours. 10527



- 5350
by:

After searching for what seemed like forever, I found this trailer hitch to fit my 1957 Ford. It is completely adjustable to fit my Country Sedan station wagon. I'm sure it will fit most years of old Fords too. It took me about 3 hours to completely install. The quality is excellent and I would recommend it to anyone looking for a hitch for their old car. Search no more, you have found it..!! 329080



- 5350
by:

Great product wish it came with the bits to install the hardwear to be more efficient. Also not sure why but it appears one side is longer than the other not sure why. 824357



- 5350
by:

Used this on my Ford 4x4 camper van. Works as advertised. 730579



- 5350
by:

This 5350 hitch came in a timely manner and is excellent in quality and finish. It will suit my needs exactly. I am installing it under a custom flatbed on a 1954 Chevy truck. 357440



- 5350
by:

Excellent hitch,bolted right up. The service was above excellent, I had damaged my hitch while traveling, and e-trailer worked with me to have it shipped to my then current location. Great company to order from. 289227



- 5350
by:

Got my order quick! looked at it looks like great stuff! Will be installing this weekend!! They have good site n fair prices!! looks easy to install it is heavy duty as I wanted!! 259074



- 5350
by:

Excellent product. easy to install. This will make it a lot easier to tow our new trailer. 242646



- 5350
by:

shipping was very fast next day delivery. hitch fit very nice 1 hour install time, very pleased! 221675



- 5350
by:

Easy install! Just towed with it and it was still there when I arrived, I can't ask for anything more! 167784



- 5350
by:

This hitch is just what I needed. Heavily built and adjustable, it can be mounted to the frame of my motor home to give me additional carrying options. etrailer is my preferred vender for this type of product. They have excellent customer service and rapid shipping. 153705



- 5350
by:

Much more solid than I thought. The only problem I had was getting 9/16" holes in the cross bars. Not many shade tree mechanics have a 9/16" drill bit and drill motor to drive it. I think the 4- 9/16 bolts are unnecessary as the whole unit is bolted to the frame with 4- 1/2" bolts. Unit looks nice and sturdy. 68786



- 5350
by:

I think this should include not only a product review but also my interaction with etrailer.com. The experience has been the easiest I have had in on-line buying. The product arrived as expect and in undamaged condition. The hitch is high quality product with no "wants' on my part. Every thing needed was included. I would buy another hitch from them but I don't think they make one for a bicycle. 22280



- 5350
by:

Just what I needed. Deliver was on time. Install took about 2 hours, no big problems Now I am ready to head to the river. 14877



- 5350
by:

Great Job By a Great Company I needed a trailer hitch for my class "C" motorhome luckly i stumbled upon a well done website lots of good products with lots of detailed info made a phone call to their shop reassured product was right one I ordered online given super price plus upgrade on delivery time {No Charge!) then tracking e-mails all good stuff Plus it arrived when promised cant wait to complete installation and use...Thank You Etrailer.com 4805


15
15

Ask the Experts about this Draw-Tite RV and Camper Hitch

  • Trailer Hitch and Bike Rack for Motorhome to Carry 70 lb Electric Bike
    While there is a way for you to carry a 70 lb electric bike on the back of a motorhome, there are no ladder-mounted bike racks that have the capacity to carry a 70 lb bike. Instead you will need to add a trailer hitch, the Multi-Fit Motorhome Trailer Hitch # 5350, which you can do so long as your motorhome has a chassis from 24" to 46" wide, or the Multi-Fit Motor Home Trailer Hitch # 82201 for frame widths from 47" to 71" wide. Once you have the right hitch you will simply need...
    view full answer...
  • Trailer Hitch Receiver for Motorhome on 2006 Ford F-53 Chassis
    There is a potential option so you can install a trailer hitch on your Monaco Monarch, though there is nothing that is a direct, custom-fit for a 2006 Ford F-53 chassis, so you will need to measure the frame of your chassis to find the right fit. If your frame measures 24" to 46" wide you can use the Multi-Fit Motorhome Trailer Hitch # 5350. If your frame measures 47" to 71" wide you can use the Multi-Fit Motor Home Trailer Hitch # 82201. Each of these hitches are bolt-on options...
    view full answer...
  • Recommended Trailer Hitch for 2003 Ford E450 Chassis
    The Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center # 41945 is a confirmed fit for 2000 - 2003 Ford Van Full Size and may fit your chassis. I recommend checking the dimensions of the frame holes as this hitch's mounting holes are 38-1/2 inches on center. This hitch is rated for 1,500 lb tongue weight and 10,000 lbs towing. This hitch will be dependent on the chassis and will not work if it has been extended. Your alternative if you don't have these holes is the Multi-Fit...
    view full answer...
  • What Does The Reese 36041 RV Hitch Fit?
    The part number 63041 that you mentioned is a trailer hitch receiver for RV's that is no longer available. I reached out to my contact at Reese and it was an OEM option that was discontinued in 2013. There is not a fit guide specifically for that hitch other than it is only for RV use. It has a gross towing rating of 3,500 lbs with a max 300 lbs tongue weight rating. If you want to replace it, I recommend the Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide # 5350 made by the same...
    view full answer...
  • Replacement RV Trailer Hitch Compatible with Workhorse Chassis
    We don't have a specific V shaped option compatible with your Workhorse Chassis. The only options we have a straight bars like Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide # 5350. For your application, it sounds like you will need to have a shop make something custom for you. I recommend starting with the Combo Bar 12" with 2" Trailer Hitch Receiver - Unpainted # E-11 and having something custom welded for your application. If you were to alter something like the Draw-Tite...
    view full answer...
  • Multi-Fit Hitches Available for a Class C Motorhome
    There are other multi-fit hitches available for your 2014 Mini Wini 31K class C, but the Blue Ox Specialty Trailer Hitches # SC9000 will only work on Class A motorhomes. Check out the Multi-Fit Motorhome Trailer Hitch # 5350. This hitch has a 500 lb tongue weight rating and 5,000 lb trailer weight capacity that can fit frame widths between 24 and 46 inches. If that range isn't large enough you could also check out the Curt Hitch part # 13703 as this hitch can fit frames from 22 inches...
    view full answer...
  • Trailer Hitch Recommendation that Doesn't Require Drilling for a Georgetown RV on Ford F-53 Chassis
    Any of the RV hitches available are going to require drilling with the exception of Curt hitch # 13703 but it, too, is rated for 3,500 pounds. What I recommend is to have a hitch welded on such as # 41990-07 which fits frame widths up to 44 inches or # 41991-07 that fits frame widths up to 62 inches. Frame width is measured outside to outside from one frame rail to the other. The hitches will need to be welded on by a professional welder for a nominal fee. The benefit is you will have...
    view full answer...
  • Hitch Recommendation for a Rockwood Roo Trailer
    If your Rockwood Roo has a frame width between 24 and 46 inches you would want the Draw-Tite Multi-Fit Hitch, part # 5350. This hitch has a 500 lb tongue weight capacity and a 5,000 lb total trailer weight capacity. Another hitch to consider is the Curt Hitch part # C13701 that will fit 18 to 51 inch frame widths and has a 500 lb tongue weight capacity and 6,000 lb total trailer weight capacity.
    view full answer...
  • Replacement Trailer Hitch Receiver for 2006 Forest River Georgetown Class A Motorhome
    The Draw-Tite Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide # 5350 is rated for 5,000 lbs as you stated. From what I can find, your Jeep may be over this rated towing limit and most Class A Motorhomes have a welded hitch from the factory capable of much higher weights. I recommend the Tow Ready J-Pin Stabilization Pin and Barrel Lockset for 2" Trailer Hitches # 63201 to use with this hitch if you decide to go this route. It will provide an anti-rattle that will work well with...
    view full answer...
  • Frame Mount RV Trailer Hitch for a Frame Width Greater than 46 Inches
    When looking at frame width for hitches such as # 5350 the compatible frame widths listed are measured from the outside of one frame rail to the outside of the other. If your frame width is 46 inches inside to inside then this hitch will not work. The next step up in width is the one you would need, # UF35-946403, which fits frame widths of 47 to 77 inches outside to outside. We also have # C13701 and # C13702 that you could use based on the frame width you listed. So a few options there...
    view full answer...
  • Trailer Hitch to Carry a Generator on the Back of a Travel Trailer
    For a cargo carrier holding a generator at the back of a travel trailer I definitely recommend installing a frame mounted trailer hitch. It is unlikely that a bumper will be rated high enough to carry the generator and carrier and be able to withstand the stresses involved. If your trailer has a frame that measures 31 inches to 46 inches wide, I recommend installing hitch # 5350. I have included a link to the installation details and I recommend having the hitch professionally installed....
    view full answer...
  • Trailer Hitch for a 2004 Coachman RV to Tow a 5,000 Pound Trailer
    For your RV and the 5,000 pound trailer I recommend using an RV hitch that is rated for weight distribution such as # C13701 or # C13702 and to use a weight distribution system. This is because the hitches max out at 5,000 pounds with the exception of these 2 (when used with weight distribution). But to use either of these you would have to get the tongue weight down to 600 pounds or less, even when using weight distribution, to be able to tow the trailer. If you cannot get the tongue...
    view full answer...
  • What is the Mounting Hole Spacing for Motorhome Hitch 5350
    Motor home hitch # 5350 features two holes on each side bracket for mounting the hitch to your frame. The bolt holes are spaced 8-5/8 inches apart, center to center, and are 1/2 of an inch in diameter. I have included a link to the installation instructions for the hitch.
    view full answer...
  • Recommended Trailer Hitch Receiver For 2005 Ford E-450 Chassis
    I reached out to my contact at Draw-Tite and for the 2005 Ford E-450 there isn't a custom fit hitch available. There is also not a Class IV or Class V hitch available from any of our manufacturers for your chassis. The largest hitch I can recommend is the Draw-Tite Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide # 5350 that has a 5000 lb weight capacity but that bumps up to 6000 with weight distribution. The tongue weight rating when using weight distribution jumps from 500 lbs,...
    view full answer...
  • Trailer Hitch with 2 Inch Receiver for a 2010 Coachman 5th Wheel Trailer
    For an RV hitch that you can install on your 2010 Coachman 5th wheel trailer I recommend Ultra-Fab trailer hitch # UF35-946403. This hitch fits frame widths of 47 inches to 77 inches so it will fit your 66 inch frame (measured between the rails). Frame width in reference to this hitch is measured from the outside of one frame rail to the outside of the other. It is designed to weld directly to the bottoms of the frame rails. If you do not think this design is going to work then the...
    view full answer...
  • Can the Factory Trailer Hitch On a Fleetwood Jamboree Be Used for Towing
    The factory trailer hitch on most Fleetwood Jamborees is not really suitable for flat-towing as it does not have a sufficient weight capacity. The issue has little to do with the motorhome's engine/transmission but rather the actual strength of the connection point which is the trailer hitch. In order to obtain the needed weight capacity for your Jeep you will need to upgrade. I recommend the Multi-Fit Motorhome Trailer Hitch part # 5350 which is rated for up to 5,000 lbs. The Multi-Fit...
    view full answer...
  • How to Measure RV Frame for Draw-Tite Multi-Fit Motorhome Trailer Hitch
    When measuring the frame width of your motorhome to ensure fitment of the Draw-Tite Multi-Fit Trailer Hitch # 5350 that you referenced, you will want to measure from the outside of one frame rail to the outside of the other frame rail. If you find that the frame width on your chassis is 24 to 46 inches, then this trailer hitch will work well. This multi-fit hitch features a 2 inch receiver opening, a 5,000 pound towing capacity, and a 500 pound tongue weight limit. Its black powder...
    view full answer...
  • Trailer Hitch for 2009 Ford E350 Box Truck
    Box trucks typically have a rear section that hangs below the truck frame quite a bit which makes installing a hitch a bit difficult. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a box-truck body like yours are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
    view full answer...
  • Installation of the Multi-Fit Motorhome Trailer Hitch, Item # 5350, No Welding Required
    Welding is not required for installation of the Multi-Fit Motorhome Trailer Hitch, item # 5350. Once you have the tube cut to length, be sure it is centered on the vehicle, you will need to drill 1/2 inch holes in the cross tube to secure it to the brackets. There are holes in the receiver portion of the brackets to use as a template for drilling the cross tube (see instructions).
    view full answer...
  • Hidden Hitch Trailer Hitch Receiver Weight Capacity Maximum.
    I reached out to the manufacturer of Hidden Hitch which has been discontinued and replaced with Draw-Tite in most instances. The model of hitch you have has been discontinued but I was able to get the specs for you from the manufacturer. There is not a rating for use with weight distribution systems so you will be limited to the 5,000 lb capacity. If you want a system rated for 6,000 lbs (with weight distribution), I recommend the Draw-Tite Multi-Fit Motorhome Trailer Hitch, 24" -...
    view full answer...
  • Universal Trailer Hitch Receiver for a Lowered and Customized 1962 Ford F-100
    We carry universal trailer hitch receivers that are mainly used on the back of motorhomes and trailers but there's no reason they can't be installed on a truck. For your Ford I recommend the Draw-Tite # 5350 which fits frames from 24 to 46 inches. You will need to drill into your truck's frame. Another option that can be bolted or welded to the frame is the Curt # C13702. It fits frames from 18 to 51 inches. Both hitch receivers are 2 inch, Class III hitches. The top of the...
    view full answer...
  • Recommended Trailer Hitch for a Thomas Saf-T-Liner School Bus
    The best option we have for a trailer hitch for a Thomas Saf-T-Liner is universal since they don't offer custom applications, the Multi-Fit Motorhome Trailer Hitch part # 5350 should work so long as you verify frame spacing and it features an easy four hole installation. It will have plenty of capacity for trailers or a vehicle.
    view full answer...
  • Trailer Hitch Option for 2006 Monaco La Palma Motorhome
    There is a potential option for a trailer hitch for your 2006 Monaco La Palma motorhome, though there are no custom-fit hitches for this vehicle, which was built on a Roadmaster motorhome chassis. Instead, you may be able to use the Multi-Fit Motorhome Trailer Hitch # 5350 which will fit so long as your '06 Monaco has a chassis that measures between 24" and 46" wide so you will need to take a quick measurement to determine if it will fit. This is a 2" hitch with a 5,000 lb towing...
    view full answer...
  • Front Mount Hitch for 2019 Ford F-550 Shuttle Bus
    I do have an option for you, however there isn't a custom front mount hitch available that's designed to fit your 2019 Ford F-550 shuttle bus. Your best option is going to be with a universal model like the Draw-Tite Multi-Fit Trailer Hitch # 5350 that will require some drilling. This particular hitch features adjustable brackets that allow it to fit frame rails that are 24" to 46" wide. The brackets will get bolted to the frame to provide you with a crosstube and 2" receiver. I just...
    view full answer...
  • Measurement Of Bracket Holes Center On Center Of Side Brackets Of Multi-Fit Motorhome Trailer Hitch
    The side support brackets of the Multi-Fit Motorhome Trailer Hitch, 24 - 46 inches wide # 5350 have a measurement of 8.62 inches center to center. This hitch has the extra hole for stabilization. I recommend using the Tow Ready J-Pin Stabilization Pin and Barrel Lockset for 2 inch Trailer Hitches # 63201 to add stability to your accessory with this hitch.
    view full answer...
  • Hitch Availability for Travel Trailer to fit 4 Bike Rack
    If the frame of your travel trailer is between 24 and 46 inches you could install the Draw Tite trailer hitch part # 5350 which has a tongue weight rating of 500 lbs which would be more than enough for a 4 bike rack. Then for a 4 bike rack that is approved for use behind a travel trailer like yours the Swagman Trailhead part # S63381 would be a fantastic option. Not all bike racks are rated for the rougher ride quality at the rear of a camper but this rack is. If you plan on carrying...
    view full answer...
  • Draw-Tite # 5350 Recommendation for a 1996 Shasta 280 Motor Home
    Drilling an additional 2 1/2 inch holes in the frame of your 1996 28 foot Shasta Motor Home to install the Draw-Tite # 5350 would not weaken the frame. This hitch would work very well for you. I attached installation instructions for you to check out also.
    view full answer...
  • What Hitch Will Fit my 1981 Fleetwood Tioga Motorhome
    Because our vendors don't offer motorhome specific hitches, you'll need to use an adjustable width hitch. You'll need to measure the frame on the motorhome to see how wide it is. We have several adjustable motorhome hitches to accommodate many frame widths. The part you were looking at will fit 24-46 inch wide frames and will bolt to the underside of the frame. The most versatile is Curt RV hitch part # 13703. It will accommodate frames from 22 inches to 72 inches wide and will fit box,...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv and camper hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv and camper hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Cole B
Updated by:
Sarah W
Updated by:
Alexander C
Updated by:
Jenny M
Updated by:
Hannah L
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.