Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Built for the road, this 8-ply radial tire carries a 1,220-lb maximum load at 65 psi, with an M speed rating of 81 mph. The double steel belts and full nylon plies deliver long life and highway stability, while the premium rubber compound helps disperse heat on hot asphalt. It’s DOT compliant and ready for steady towing mile after mile.
Saltwater and humidity don’t stand a chance. The 12" x 4" galvanized steel wheel uses an 8-spoke design with beveled stud holes to keep the wheel secure against the hub. The galvanized finish offers superior corrosion resistance compared to painted steel, so it stays solid and good-looking through wet conditions and coastal trips.

The Karrier S-Trail tread pattern uses computer-generated ribs with breaks and sipes that channel water away. That means better traction in rain, snow, or slush and a more stable ride when surfaces get slick. The radial construction keeps rolling resistance low for smoother handling at speed.

No extra shop time needed. This tire comes pre-mounted on its galvanized wheel and inflated to spec, so you can bolt it on and get moving right away. Owners upgrading from smaller wheels note how easy the swap is and how much better their trailers handle once the new setup is installed.
The wheel’s standard 5 on 4-1/2" bolt pattern, 3.19" pilot diameter, and zero offset make mounting simple. With a wheel capacity of 1,250 lbs, it’s a balanced match for the tire’s load range. Each assembly meets DOT specifications and includes a limited warranty—5 years on the tire and 2 years on the wheel—for dependable use season after season.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews

Gwendolyn Y.
5/15/2025
The new rims look great, Eric! Is that a jet ski trailer? Please correct me if I'm wrong :)



Brooke M.
5/13/2025
Sweet! Is that a jetski I see? Headed to the lake anytime soon?

Katrina D.
7/13/2023
Unfortunately, this is very common for these galvanized rims. They are dipped into molten zinc and are drip dried. This will sometimes cause bubbles and or rough marks on the rims, you can sand it down to make it smooth.

Gwendolyn Y.
4/11/2025
The new wheels looks great on your trailer!

Brooke M.
7/10/2025
Definitely! Radial is the way to go in my opinion. What kind of trailer are these for?


Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.








Kelly
8/15/2025
Still working great after a full year of road travel to and from the boat launch