In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…
The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…
...and has a diameter of 21.3 inches. Since the section width of the ST145/R12 tire is about 1/2 an inch wider you will want to make sure that you have enough clearance with the trailer frame as it sits about...
Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…
Hello Steve, thanks for reaching out. All of the trailer tires we sell come balanced in the manner that trailer tires are balanced. Every tire and every wheel has a high (heavy) and low (light) spot. The manufacturers offset the high spot on the tire…
...The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6...
The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…
...will want to make sure to match the load range on the existing tires.
If you do have a 5 on 4-1/2 bolt pattern and a load range C bias tire, then a match would be # MX94F....
Karrier and Loadstar are two different brand names used by Kenda. There's no difference in quality or function between the two brand names. For a ST175/80-13 Radial trailer tire in load range D, I'd recommend part #AM10210 if you're…
Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…
Great question, William! The Karrier ST225/75R15 #KE63KV is a KR35 while the Karrier ST225/75R15 #AM10303 is a KR03 according to Kenda. There is a slight variation in the tread pattern and from what Kenda says about them it looks like the KR03 is…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…
The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…
...and has a diameter of 21.3 inches. Since the section width of the ST145/R12 tire is about 1/2 an inch wider you will want to make sure that you have enough clearance with the trailer frame as it sits about...
Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…
Hello Steve, thanks for reaching out. All of the trailer tires we sell come balanced in the manner that trailer tires are balanced. Every tire and every wheel has a high (heavy) and low (light) spot. The manufacturers offset the high spot on the tire…
...The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6...
The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…
...will want to make sure to match the load range on the existing tires.
If you do have a 5 on 4-1/2 bolt pattern and a load range C bias tire, then a match would be # MX94F....
Karrier and Loadstar are two different brand names used by Kenda. There's no difference in quality or function between the two brand names. For a ST175/80-13 Radial trailer tire in load range D, I'd recommend part #AM10210 if you're…
Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…
Great question, William! The Karrier ST225/75R15 #KE63KV is a KR35 while the Karrier ST225/75R15 #AM10303 is a KR03 according to Kenda. There is a slight variation in the tread pattern and from what Kenda says about them it looks like the KR03 is…
Explore the Perfect Fit: 5 on 4-1/2 Inch Trailer Tires and Wheels
Discover the ideal 5 on 4-1/2 inch trailer tires and wheels for your setup. These products offer a sturdy, reliable fit for various trailers, ensuring a smooth ride and a great look. Perfect for enthusiasts seeking quality and style.
While most find these products reliable, some have noted issues with manufacturing defects like bent wheels or off-balance tires. It's important to check for these upon delivery and address any concerns with the manufacturer or retailer promptly.
These wheels and tires can significantly enhance the look of your trailer, offering a sleek and polished appearance. With options like high-end rims and quality finishes, they can make your trailer stand out on the road.
These tires and wheels are designed to handle various terrains, from smooth highways to rugged off-road trails. They offer durability and stability, ensuring a safe and comfortable ride whether you're towing a camper or a utility trailer.
Alloy wheels in the 5 on 4-1/2 inch size offer a stylish look and are often lighter than steel, which can improve fuel efficiency. They also provide excellent heat dissipation, which can enhance braking performance and extend the life of your tires.
The 5 on 4-1/2 inch size is a common bolt pattern that fits many trailers, providing a secure and reliable connection. This size ensures compatibility with a wide range of trailer types, making it a versatile choice for those looking to upgrade or replace their wheels and tires.
Filters
