See what our Experts say about this Fulton Spare Tire Mount

• Spare Wheel and Tire Carrier for Trailer with Angle Iron Railing
  We actually have a spare wheel carrier for trailers with angle-iron rails with the etrailer Spare Tire Carrier for Trailer with Angle-Iron Railing # e99045.
  view full answer...
  
• Spare Tire Carrier Recommendation for Trailer with Angle Iron Frame
  The Fulton Economy Spare Tire Carrier with Wheel Nut Lock # FETCSTL0701 would work just fine on a section of angle iron that is 3 inches by 2 inches. The frame does not have to completely fill out the U-bolt to allow the carrier to install. I attached a picture that shows this carrier installed on an angle-iron frame trailer like yours as well. Also an install video of the same trailer.
  view full answer...
  
• Availability of Replacement J Bolt for Spare Tire Carrier
  I've looked through our spare tire locks, and have seen that we don't offer one that uses a J-bolt. Fulton offers an inexpensive carrier/Lock solution, part # FETCSTL0701 that would allow you to attach and lock a spare tire onto your trailer frame. You can see the rest of the spare tire carriers and locks we offer by clicking the provided links.
  view full answer...
• Determining Which Spare Tire and Carrier Fits 2016 Aluma 638LW Utility Trailer
  Thanks for the information! The wheel part number 60-0000460 you provided for your 2016 Alma 638LW trailer shows as a 175/80R13 tire and wheel with the 5 on 4-1/2" bolt pattern so the Westlake ST175/80R13 Radial Trailer Tire w/ 13" Silver Mod Wheel - 5 on 4-1/2 - Load Range C # LHAW165 you were looking at will work perfectly as a spare. We do have a version of the U-bolt mount you mentioned, which would be the Fulton Economy Spare Tire Carrier with Wheel Nut Lock # FETCSTL0701 which includes...
  view full answer...
• Recommended Spare Tire Lock for 2018 Trailstar Trailer with Integrated Spare Tire Mount Location
  It does appear to have a mount under the trailer for your spare. It looks like you just need to use some bolts and then use a lock like the Spare Tire Carrier Lock # FETCHL0700 to secure it. Many times when there is not a mount, you would use the Fulton Economy Spare Tire Carrier with Wheel Nut Lock # FETCSTL0701 which can work, but is intended to go around a frame so would have extra length on your application.
  view full answer...
  
• Spare Tire Carrier Recommendation for a Trailer with Angle Iron Side Rails
  The Fulton Economy Spare Tire Carrier with Wheel Nut Lock # FETCSTL0701 would work just fine on a section of angle iron that is 2 inches by 2 inches. The frame does not have to completely fill out the U-bolt to allow the carrier to install. I wouldn't recommend the # FSTC1000301 for a trailer with angle iron rails.
  view full answer...
  
• Spare Wheel Carrier for PWC Trailer
  I really like the part # FETCSTL0701 for your PWC trailer since it fits well, fits the standard bolt patterns and unlike others comes with a lock. This would be what I recommend.
  view full answer...
  
• How Does the Fulton Economy Spare Tire Carrier with Lock # FETCHL0700 Prevent Theft
  You are not missing anything. The lug nuts can simply be removed, and off comes the tire. The lock is merely providing a deterrent. The vast majority of thieves are looking for the easy grab, anything you can do to slow them down or discourage them is beneficial. Locks serve the purpose of keeping honest people honest, a truly determined thief can defeat virtually any lock. I think a better choice would be part # FETCSTL0701. The lock on this carrier actually sandwiches one of the lug...
  view full answer...
  
• Spare Wheel and Tire Lock Recommendation for Securing Spare to Boat Trailer
  Looks like what you need is the Fulton Economy Spare Tire Carrier with Wheel Nut Lock # FETCSTL0701 which will work well for you to carry a spare on the boat trailer frame you sent in a picture of. This comes with a lock too to secure the wheel to it.
  view full answer...
• Recommended Spare Tire U-Bolt Carrier for Trailer
  It sounds like you are looking for the Fulton Economy Spare Tire Carrier with Wheel Nut Lock # FETCSTL0701. This comes with the lock and also is 1/2 inch diameter. Another option is the CE Smith Spare Tire Carrier for Trailers - Steel - 4- and 5-Lug Wheels - 12-1/4" Long # CE22011Z-11050-2. The U-bolt has a 7/16 inch diameter. .
  view full answer...
  
• Recommended Spare Tire Carrier for a 15" Inch Wheel with 5 on 5 Inch Bolt Pattern
  The only type of spare tire carriers we have that will fit a wheel with a 5 on 5" bolt pattern are the u-bolt type. For this, I recommend the Fulton Economy Spare Tire Carrier with Wheel Nut Lock part # FETCSTL0701. You may need to bend the u-bolt just slightly to make it fit the wheel. This carrier will fit a trailer frame up to 3", has a zinc plated finish for corrosion resistance, and comes with a lock for the wheel. I have attached a few photos to show the different ways it can be...
  view full answer...
  
• Available Trailer Spare Tire Carriers for Wheel with 5 on 5 Bolt Pattern
  The only available trailer spare tire carrier we have for wheels with a 5 on 5 bolt pattern will be something like the Fulton Economy Spare Tire Carrier with Wheel Nut Lock # FETCSTL0701. If your trailer has an angle iron style frame then you could also use the etrailer Spare Tire Carrier for Trailer with Angle-Iron Railing - Clamp On # e99045. Both of these carriers will work with 5 on 5 bolt pattern wheels and the Fulton carrier can be used on the tongue of the trailer, so you'd just...
  view full answer...
• Could Fulton Economy Spare Tire Carrier # FETCSTL0701 Fit Tracker Boat Trailer
  As long as the frame width on your Tracker boat trailer is 3 inches or less the Fulton Economy Spare Tire Carrier # FETCSTL0701 will fit it and work well. I attached a review video for this for you to check out as well.
  view full answer...
• Spare Tire Carrier Recommendation for 5 on 5 Bolt Pattern
  Depending on the configuration and mounting options on your trailer you may be able to use a spare tire carrier like the Fulton Economy Spare Tire Carrier, part # FETCSTL0701. When used with a spare tire with a 5 on 5 bolt pattern the bracket can be bent to fit. This option does not offer any offset, but will work for 5 on 5. With this set up you will get the carrier and lock in one. I went out to the warehouse and took a measurement of this part for you (see photo at right) to help you...
  view full answer...
  
• Spare Tire Carrier Recommendation for a Trailer with 3 inch Wide Frame and 5 Lug Wheel
  The spare tire carrier part # FETCSTL0701 can fit a 3 inch wide frame like what you have and can fit 5 lug bolt patterns as well so it would work well for you. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Spare Tire Lock Solutions For A Malone MicroSport Trailer
  The Malone MicroSport Trailer for 2 Heavy Kayaks # MPG461B2 already comes with the lockable mounting brackets and a spare tire, the only thing that is sold separate is the lock for the spare. You can us any lock the two brackets together, however I recommend taking a look at the BOLT Covered Padlock # BL7018519. This padlock will code to the center cut key on your 2015 Lincoln Navigator so you do not have to worry about carrying around a bunch of different keys, and will do an excellent...
  view full answer...
• Spare Tire Mount for ST205/75R14 Tire with 14" Aluminum Wheel with 5 on 4-1/2" Bolt Pattern
  Actually the Fulton Economy Spare Tire Carrier with Wheel Nut Lock # FETCSTL0701 that you referenced is a great option for carrying your Westlake ST205/75R14 Radial Tire w/14" Aluminum wheel on your 2019 Aluma trailer! It is compatible with 8", 9", 12", 13", 14" and 15" wheels with 4- or 5-lug rims, and fits trailers with up to 3" wide frames. Attached are some review videos for you to reference.
  view full answer...
• Fulton Economy Spare Tire Carrier Compatibility with Angle Iron Frame Trailer
  The Fulton Economy Spare Tire Carrier - Lockable # FETCLB0201 or the Fulton Economy Spare Tire Carrier with Wheel Nut Lock # FETCSTL0701 will work with your bolt pattern. I've attached a video to show the installation on a similar angle iron frame to assist. The angle iron can cause wear over time on the sidewall of the tire, so I recommend rotating the spare every so often to give you less wear on a single part of the tire.
  view full answer...
• Spare Tire Mount for a 2 inch by 6 inch Trailer Tongue
  Depending on the configuration and mounting options on your trailer you may be able to use a spare tire carrier like the Fulton Economy Spare Tire Carrier # FETCSTL0701. This u-bolt style carrier is 4-5/8 inches wide and 9-1/8 inches long, and includes a locking feature. I have also provided a short video of this for your reference, and a link to the other u-bolt style spare tire carriers we have for your reference. We currently do not have a spare tire carrier like the one that you...
  view full answer...
• Availability of Trailer Spare Tire Carrier with 5 on 5 Bolt Pattern
  Depending on the configuration and mounting options on your trailer you may be able to use a spare tire carrier like the Fulton Spare Tire Carrier, # FETCSTL0701. When used with a spare tire with a 5 on 5 bolt pattern the bracket can be bent to fit. This option does not offer any offset, but will work for 5 on 5. With this set up you will get the carrier and lock in one. I went out to the warehouse and took a measurement of this part for you (see photo at right) to help you decide if it...
  view full answer...
  
• Spare Tire Carrier Recommendation for Trailer with Angle Iron Rails
  The Fulton Economy Spare Tire Carrier with Wheel Nut Lock # FETCSTL0701 would work just fine on a section of angle iron that is 2 inches by 2 inches. The frame does not have to completely fill out the U-bolt to allow the carrier to install.
  view full answer...
• Trailer Spare Tire Carrier Recommendation for a 2 inch Trailer Frame
  For a similar spare tire mount to the Fulton Economy Spare Tire Carrier # FETCSTL0701 that you referenced that works on a 3 inch trailer frame you would want the part # CE27310G. This carrier can fit on frames that are up to 3-1/2 inches by 4 inches so it should work well for you.
  view full answer...
• Can Fulton Spare Tire Carrier # FETCSTL0701 be Used on 2 inch Square Frame
  You can use a spare tire carrier like the # FETCSTL0701 that has a 3 inch opening on a 2 inch wide frame but there might be a little bit of play. So you'd either have to really tighten it down or come up with a 1 inch spacer for it.
  view full answer...
• Trailer Spare Tire Carrier Recommendation for Trailer with Angle Iron Rails
  The Fulton Economy Spare Tire Carrier with Wheel Nut Lock # FETCSTL0701 that you referenced would work just fine on a section of angle iron that is 2 inches by 2 inches. The frame does not have to completely fill out the U-bolt to allow the carrier to install.
  view full answer...

Do you have a question about this Spare Tire Mount?