Offset Trailer Spare Tire Mount by Dutton-Lainson: The Breakdown Video

I do have an option for you but the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells part #Y01-140B is not height adjustable. The foot height of this particular setup is 3" and there is not a taller foot available unfortunately. There are a…

I can see in your attached picture that your tire size is ST205/75-14 which is a very common size and would mean that you would need a 14 inch trailer wheel with a 5 on 4-1/2 inch bolt pattern like the Aluminum Liger Wheel part #LH84FR or any of the…

I was unable to find information on the model EZ Loader Boat Trailer referenced in your question. I recommend checking the sidewalls of your existing tires to see what size is currently mounted. There should be a number listed, like what is on the…

The 78-14 tire size is the same as the modern tire size of 205/75-14 which we offer on a similar white wheel as yours with #AM32161.

We have that size (see link), but none of the tires are radial. They are all bias ply as that is the common construction for the LT tires. The closest tire size that is radial would be the 235/80R16 like part #TTWTRTM2358016E. This size has a section…

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

We have a U-bolt type carrier that fits 4 bolt spares like yours. For that we have the part #CE22007Z-11050-2. Or if you are looking for a carrier that holds the wheel away from the trailer you'd want the part #FSTC1000301.

It is not usually necessary to change wheel studs when switching from stamped steel trailer wheels to machined aluminum wheels like the Lionshead #LHSJ211G but I went to our warehouse to measure the thickness of the material at this wheel's hub,…

The height of the Curt RockerBall from the base that sits upon the ball mount to the top of the ball is as follows: - 2-5/16 inch ball with 1 inch diameter shank, #C82KR is 4.607 inches - 2-5/16 inch ball with 1-1/4 inch diameter shank, #C29FR is…

The Curt RockerBall Anti-Rattle Towing Kit #C43KR takes the additional height of the base of the RockerBall into account for the listed 4" rise and 5" drop. I have attached an image below showing how it is measured. Typically, you find the…

The only solution I can recommend for you that will allow you to transport 2 kayaks that weight 92 lbs each would be to go with a Yakima Rack and Roll trailer #Y08106 with the tongue extender #Y08109 which is needed for the length of your kayaks. The…

Adding trailer suspension enhancement such as #TTRA1702 can definitely help with ride quality but I think the best solution to keep loads on the pallet is some cargo control devices. You could start with a cargo net, I have included a link to the…