Spare Tire Mount

We have three different Roadmaster Spare Tire Carriers to choose from. None of them have been specifically tested on a Tiffin Midas since this is not a vehicle or trailer specific product. As long as you have a 2" or 2-1/2" receiver on the…

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The 24x84 etrailer Cargo Carrier for RV Bumper part #e96ZR can hold a spare tire but there isn't any sort of specific mount for this. The photo attached below is a custom job from a neighbor and I'm not totally sure what they used to create…

Hey Bruce, so the Westlake Wheel and Tire part #WST89FR that you referenced was designed to use standard 1/2-20 lug nuts but I would go with a stainless steel lug nut like the part #LHLR103 as it won't corrode or swell up like the chrome plated…

The Roadmaster Spare Tire Carrier #RM-195125 is going to likely be your best option. The only other option would be a Carrier #e98ZR you would have to remove to open the door. I have added an image with the length of the carrier below as you may…

The difference between the item #RM-195125 and the item #RM-195225 is that they are designed for different sized wheels. The item #RM-195125 is designed to handle up to 16.5" tall wheels where as the item #RM-195225 can hold between 16" and…

If you check out the diagram I attached of the side of the Lippert Components Spare Tire Winch #LC159056 that mounts you can see that the distance between the mounting hole locations is 5-1/4" on center. I reached out to my contact at Lippert…

Hey Zach, I wish we had the ability to have wheel and tires mounted here but at this time we do not. But what you could do is have the wheel and tires shipped to a local installer of ours and they could mount them for you? I attached a link to a page…

A keen observation indeed, Brett. The mounting hole spacing on the Square D-Ring Tie-Down Anchor #ABS69FR is 3" horizontally and 3-1/4" vertically. I edited a picture for you to help illustrate.

Tire designations ST205/75D14 and ST205/75R14 are both for special trailer tires with a 205mm width, 75-percent aspect ratio and that fit a 14-inch wheel. The difference between them is the tire's type of construction. The ST205/75D14 tire is a…

We have three different Roadmaster Spare Tire Carriers to choose from. None of them have been specifically tested on a Tiffin Midas since this is not a vehicle or trailer specific product. As long as you have a 2" or 2-1/2" receiver on the…

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The 24x84 etrailer Cargo Carrier for RV Bumper part #e96ZR can hold a spare tire but there isn't any sort of specific mount for this. The photo attached below is a custom job from a neighbor and I'm not totally sure what they used to create…

Hey Bruce, so the Westlake Wheel and Tire part #WST89FR that you referenced was designed to use standard 1/2-20 lug nuts but I would go with a stainless steel lug nut like the part #LHLR103 as it won't corrode or swell up like the chrome plated…

The Roadmaster Spare Tire Carrier #RM-195125 is going to likely be your best option. The only other option would be a Carrier #e98ZR you would have to remove to open the door. I have added an image with the length of the carrier below as you may…

The difference between the item #RM-195125 and the item #RM-195225 is that they are designed for different sized wheels. The item #RM-195125 is designed to handle up to 16.5" tall wheels where as the item #RM-195225 can hold between 16" and…

If you check out the diagram I attached of the side of the Lippert Components Spare Tire Winch #LC159056 that mounts you can see that the distance between the mounting hole locations is 5-1/4" on center. I reached out to my contact at Lippert…

Hey Zach, I wish we had the ability to have wheel and tires mounted here but at this time we do not. But what you could do is have the wheel and tires shipped to a local installer of ours and they could mount them for you? I attached a link to a page…

A keen observation indeed, Brett. The mounting hole spacing on the Square D-Ring Tie-Down Anchor #ABS69FR is 3" horizontally and 3-1/4" vertically. I edited a picture for you to help illustrate.

Tire designations ST205/75D14 and ST205/75R14 are both for special trailer tires with a 205mm width, 75-percent aspect ratio and that fit a 14-inch wheel. The difference between them is the tire's type of construction. The ST205/75D14 tire is a…