bing tracking image
  1. Trailer Suspension Parts
  2. Dexter
  3. Equalizer Upgrade Kit
  4. Boat Trailer
  5. Camper
  6. Car Hauler
  7. Snowmobile Trailer
  8. Utility Trailer
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Triple Axle - 8,000 lbs
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Dexter

Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Triple Axle - 8,000 lbs

Part Number: K71-657-00
In Stock
$829.60
Trailer Suspension Parts
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Replace your standard equalizers with these shock-absorbing E-Z Flex units to get a smooth ride for your triple-axle trailer. Equalizers with rubber cores absorb road shock for a smooth ride. Heavy-duty shackle straps ensure strength. Great Prices for the best trailer suspension parts from Dexter. Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Triple Axle - 8,000 lbs part number K71-657-00 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (646)
  • Q & A (0)
  • Photos

Dexter Trailer Suspension Parts - K71-657-00

Highlights

  • Smoother Towing Over Rough Roads: Rubber-cored equalizers absorb shock and cut bounce.
  • Handles up to 8,000 lbs Axles: Strong enough for heavy triple-axle trailer suspensions.
  • 7-3/4" Equalizers with 35" Axle Spacing: Direct swap for standard 13-122 equalizers.
  • Wet Bolts with Grease Zerks: Easy lubrication keeps parts moving quietly and smoothly.
  • Bronze Bushings and Heavy Shackles: Long-lasting hardware for high-mileage use.
  • Strong Steel Build with Corrosion-Resistant Finish: Holds up under heavy load stress.
Made in USA

Features to know about

Smooths Out the Rough Roads: Rubber-Cored Equalizers Absorb Shock

Long trips and rough terrain can bounce your trailer around and make towing stressful. The E-Z Flex equalizers in this kit have heavy-duty rubber cores that cushion the suspension and take up the jarring motion from potholes and uneven pavement. By absorbing road shock and reducing chucking, they keep the ride steady and cut down on the back-and-forth movement that can shake up your cargo or interior.

Built to Handle Heavy Loads: Steel Equalizers Rated for 8,000-lb Axles

This system is made for triple-axle setups with double-eye leaf springs and an axle capacity of 8,000 lbs. The equalizers are strong steel pieces designed to hold up under weight and long-haul use. With one long and one short equalizer per side, both measuring 7-3/4" between outer bolt holes, the geometry fits right for trailers with 35" axle spacing. The solid build gives the suspension the backbone it needs for steady tracking under load.

Keeps Everything Moving Smoothly: Wet Bolts and Bronze Bushings

Dry, squeaky suspension parts wear out fast. This kit includes wet bolts with built-in grease zerks so you can easily keep all the pivot points lubricated. The bronze bushings add strength and resist deformation that can throw the alignment off over time. A few pumps of grease now and then keeps the movement free and quiet, cutting down on play and extending part life.

Complete Hardware for a Strong Connection: Heavy-Duty Shackles and Nuts

To tie it all together, the kit includes twelve shackle strap assemblies, press bolts, and both flange and lock nuts to secure the connections. Each shackle strap measures 2-1/4" from center hole to center hole, giving the right flex while holding tight. With 9/16" bolt holes and a set of flange and lock nuts, every connection stays snug and reliable when the miles add up.

Specs

Application

  • Application: triple-axle trailers with double-eye leaf springs

Weight and Capacity

  • Axle capacity: 8,000 lbs

Axle Spacing

  • Axle spacing: 35"

Long Equalizer Dimensions

  • Distance between outer shackle bolt holes (center on center): 7-3/4"
  • Distance between hanger bolt hole and Side A shackle bolt hole (center on center): 3-3/4"
  • Distance between hanger bolt hole and Side B shackle bolt hole (center on center): 4-5/8"
  • Height of side bolt hole to hanger bolt hole: 3"

Technical diagram showing measurements and labeled dimensions for Dexter E-Z Flex Suspension Kit K71-657-00 equalizers and shackle straps, specifying bolt hole spacing and component layout for triple-axle trailer installations.

  • Long equalizer dimensions: Distance between outer shackle bolt holes (center on center): 7-3/4" Distance between hanger bolt hole and Side A shackle bolt hole (center on center): 3-3/4" Distance between hanger bolt hole and Side B shackle bolt hole (center on center): 4-5/8" Height of side bolt hole to hanger bolt hole: 3"
  • Short equalizer dimensions: Distance between outer shackle bolt holes (center on center): 7-3/4" Distance between hanger bolt hole and shackle bolt hole (center on center): 3-7/8" Height of side bolt hole to hanger bolt hole: 2-7/8"
  • Shackle strap length: 2-1/4" from center hole to center hole

Short Equalizer Dimensions

  • Distance between outer shackle bolt holes (center on center): 7-3/4"
  • Distance between hanger bolt hole and shackle bolt hole (center on center): 3-7/8"
  • Height of side bolt hole to hanger bolt hole: 2-7/8"

Hardware

  • Shackle strap length: 2-1/4" from center hole to center hole
  • Bolt hole diameter: 9/16"

Warranty

  • Warranty: 5-Year limited warranty

K71-657-06 Dexter Axle Heavy Duty E-Z Flex Suspension Kit - Double Eye Springs - Triple Axle - 8,000 lbs

Replaces K71-657-00





Customer Satisfaction Score:

Ratings & Reviews

4.7

646 reviews
5 Stars
(527)
4 Stars
(87)
3 Stars
(16)
2 Stars
(5)
1 Star
(11)
Review Sort Icon
by:
Hoping these will last longer than the previous kit did. I will say that this time the package held together so all the parts arrived. I greased these at the interval of 2k miles they lasted about 15k. The bronze bushings in the equalizers and spring eyes were worn pretty bad at that point. this time around I also replaced all the leaf springs, I had to get them from another vendor as etrailer does not have 8k 7 leaf springs....
by:
My 10 year old Toy Hauler was in need of some TLC. I dry camp 98% of the time. Traveling down very dusty and bumpy roads. The factory equalizers had plastic bushings that had failed. The Dexter Ez-Flex came with new bronze bushings and all of the hard-ware. It took me and a friend approximately 5 hours to install these. I have only pulled the trailer once since the install, but I could notice a difference right away. I like the fact that there are bronze bushing and I am able to grease them myself. I highly recommend this product if you do a lot of dry camping and going down rough dirt roads. I should not have any other problem with my load equalizers.
The staff at etrailer was very helpful Rick S. and Michelle S. keep me informed each step along the way. This is the second big purchase I have made with etrailer and I highly recommend them and will use them again.
Thank You
by:
Have not installed them yet. They seem to be much better quality than the Equa-flex that came on the 5th wheel. Very happy with E-TRAILER and their knowledgeable staff.
Robert T. profile picture

Robert T.

5/17/2024

These are so much better than the Equaflex that came on the trailer. Much better quality and heavier duty. Installation was pretty easy with the right tools.

by:
This is an excellent upgrade from what came stock on the trailer. It is heavy duty, rides great and is very well made. I will be upgraded my other trailer with this kit soon.
My only complaint is with the packaging. It was damaged in shipping and missing two straps, etrailer sent two replacements out right away. The smaller parts need to be put in a separate box or something.
by:
I have not been home yet to inspect the merchandise in the package, but this is how the package was delivered to my house this morning.
by:
I installed this on a 2008 KZ Sportsman New Vision 40P Toy Hauler. Triple axle. We noticed a difference in the bounce on our trailer right away. Rear part of my trailer always gets bounced more than the rest of the trailer. Not so much now. Yes I would recommend this suspension upgrade especially on triple axle trailers. When I removed my old equalizers the holes were oblong instead of round where they bolted to the frame.
by:
The shipping was fast and the kit was complete. Installation was simple and fairly easy. Yes it did take a full dayto do the installation, but the end result was worth it. The coach rides smoother with less thumping. There is a noticeably less porpoise action when hitting road bumps. There is less side slip when passing other large vehicles since the suspension is stiffer. Seems to hold the line straighter.
by:
This system made my 30' three axel equipment trailer ride like a Cadillac! Its so smooth when empty I almost forget I'm towing it. With a 13,000 lb excavator on it it's smooth as silk.
I'd recommend this system to everyone who has a trailer.
by:
It’s the best set up in my opinion if you don’t have slipper springs. E trailer came Thur again, only minor delays in shipping which was beyond anybody ‘s control. Price was way cheaper than anyone else, period. No, there no paid endorsement here, they earned it.
by:
This kit was easy to install and is very high quality. There were a few small parts missing but I called and received the parts within a couple of days. Excellent customer service
Rick profile picture

Rick

11/18/2022

Works perfectly. The quality is 10 times better than the junk it replaced.

by:
The product is sturdy and built well. I already had prior experience with Dexter parts and these are manufactured with the same high quality. The instructions were easy to understand, and the Install Video that e-trailer had was EXTREMELY helpful. My installation went perfect and I had no issues. I road checked after and it felt smoother. Headed out this week for a 300 mile trip! Thank you e-trailer!
by:
Good price & service
by:
All together this is a great upgrade and the components themselves fit well and as described. Only 3 stars on the review though and here's why.
First, the items were very poorly packaged and several of the linkage bolts had protruded through the packaging and were damaged. About an extra hour and a few specialty tools were required to file and re-tap the threads, luckily I have easy access to the tools.
Second, the kit contained too many center equalizer mount bolts and too few outer wet bolts. I was again lucky that this didn't cause a big set back as I had kept extra wet bolts from a past trailer repair and had them on hand.
Although having nothing to due with the kit itself but due to the design of the front equalizer, I encountered clearance issues on the middle hangers. The hangers on my 09 WW LE3305 have gussets welded inside of them from the factory which had to be clearance to clear the zerk fittings. I also had to modify the hanger for the front equalizer to allow clearance when mounting the hanger in the upper hole, I believe it may have been okay in the lower hole without modification.
Overall I am happy with the product and the excellent service that etrailer provides.
by:
Great quality nice to have grease fittings it is a process getting to all the fittings though when you do grease it.
by:
Happy with it made a difference in how trailer handles. Did have a few problems with installing but that was due to me and not the product.
by:
Sent wrong product have welder scheduled based on package arrival e trailer only willing to ship out correct package with regular shipping. No interest in making the mistake right. I'm no longer interested in doing business with company with such low regard for customers and their situation.
by:
Product is very robust. It arrived very quickly-I was surprised. All parts were present and instructions, even for me, were clear and adequate.etrailer you're awesome!
by:
Product was as advertised - easy shipping. Thank you!
by:
Outstanding customer service
by:
I just got them yesterday afternoon and the box was whole uncovered one and it looked great will look at the rest today and do an inventory of all pieces to make sure all is there.
by:
So far it's working great. The ride is much smoother.
by:
William profile picture

William

8/3/2022

GREAT...Wish all trailer mfgs would used this product when building their trailers... THANK YOU

by:
Arrived in timely manner, exactly what I needed. These are much better quality than what came on the RV.
by:
Rides better and still going strong
by:
great products.
25
646
true
Show More Reviews

See what our Experts say about this Dexter Trailer Suspension Parts

  • How to Determine Correct Equalizer Upgrade For Triple Axle Toy Hauler
    Hey Scott, While we don't have a way of knowing which equalizers are on your triple axle Attitude toy hauler, we can help you figure out the right ones to upgrade your suspension. It's pretty simple, as all you have to do is measure your equalizer from center-to-center of the bolt holes horizontally, as well as the height from the middle of the equalizer to the center of the top bolt hole. For example, if you measured your equalizer and it was 7-3/4" long and 2-7/8" tall you could use...
    view full answer...
  • Why Do the Dexter E-Z Flex Equalizers Turn Down
    I spoke to my contact at Dexter Axle and they informed me that you may have the incorrect kit. There are currently two different E-Z Flex Triple Axle Suspension Kits for triple axle trailers which will depend on axle spacing. For example, if your axles are spaced 33" apart then you will want to use part # K71-656-00 but if your axles are 35" apart then you will want to use part # K71-657-00. It looks like you have the part # K71-657-00 therefore your axles should be 35" apart center to...
    view full answer...
    Image 1 for
  • Troubleshooting Wet Bolts/Grease Zerks That Will Not Accept Grease
    Hello Chuck, thanks for reaching out. I have heard of this happening before if the parts have been sitting for a while and dirt/dust gets inside the zerk and clogs the weep hole. It can also happen if you have been trying to add grease when its too cold outside. One thing you can try is like a heat gun or hair dryer on a low setting to try to warm things up and get things moving. Try warming it up for a bit then try adding grease. It might help to soften whatever is clogging it. If that...
    view full answer...
  • Correct E-Z Flex Suspension System for Triple Axle Trailer with 6,000 Pound Axles
    If your trailer does have 6,000 pound axle it's likely you'll need the # K71-656-00 E-Z Flex Suspension System. The equalizers are 5-5/8 inches long between the bolt holes center on center. The other kit we carry is # K71-657-00 which is generally for 8,000 pound axles has equalizers that measure 7-3/4 inches long.
    view full answer...
  • Dexter E-Z Flex Suspension Kit For 2008 Jayco Triple Axle 5TH Wheel Camper
    The Dexter E-Z Flex Suspension Kit # K71-657-00 is a universal suspension kit but you will need to confirm a few measurements on your 2008 Jayco 5th Wheel to ensure a proper fit. First this kit is only designed to work with double eye leaf springs that are 1-3/4" wide. The equalizers in this kit are designed to replace equalizers that are 7-3/4" wide for the short equalizer and 8-3/8" wide on the long equalizer. They are 2-7/8" tall and use shackle straps that are 2-1/4" from hole center...
    view full answer...
  • Replacement Upgraded Equalizers for 2007 Mobile Suites Model 32TK3
    Hey Brian! Yes, you can replace your Equa-Flex with the Dexter E-Z Flex Suspension Kit # K71-657-00. The measurements between the two kits are close enough that it won't throw off your suspension geometry, which is the most important factor with fitment. The kit also includes heavy duty shackles, wet bolts, and bronze bushings for a complete upgrade. Any big trips coming up with your trailer?
    view full answer...
  • Suspension Upgrade Kit Recommendation for a 35" Wheelbase Triple Axle Trailer
    Hey Michael, If that's from center axle to center axle then you're probably right that you need a suspension enhancement for a 35" wheelbase, but it would be good to measure your equalizers as well just to make sure everything matches up. The Dexter E-Z Flex Suspension Kit # K71-657-00 is a great option that has been proven over time to be really reliable and we've received great feedback on the ride quality increase so I recommend going with this kit. I'm attaching a dimensional photo...
    view full answer...
  • Do You Carry the Center Rubber Bushing for the Dexter E-Z Flex Equalizers with 13-143 on Them?
    Hello Daryl, The reason you’re having trouble locating a replacement is because Dexter does not offer a separate rubber bushing for the 13-143 equalizer, you’ll need to replace the entire unit. If the others are showing signs of wear as well, I recommend replacing the full set so you maintain even wear and performance across your suspension. If you just need a single replacement, the part number is # 013-144-03. If you're ready to replace all three for a triple axle setup, the full kit...
    view full answer...
  • Which Hanger is Towards Front of Trailer for Triple Axle Trailer Suspension
    Hey Eric, thanks for reaching out! The non-standard looking hangers in a kit like the Dexter E-Z Flex Suspension Kit # K71-657-00 will be towards the front of the trailer. I've added arrows to the diagram to help demonstrate this.
    view full answer...
  • Does Dexter E-Z Flex Suspension Kit for Triple Ale Trailer Come with All of the Needed Hardware
    Hey Mike, it's great to hear from you again! I don't think it's a dumb question at all, and I would definitely be checking all of the boxes before spending a lot of money on a trailer suspension upgrade. The Dexter E-Z Flex Suspension Kit # K71-657-00 comes with enough hardware for both sides of the trailer, yes. There really are only 2 of the equalizers per side of the trailer in a triple axle setup so you'll have everything you need. If you have any additional questions about this...
    view full answer...
  • Recommended Suspension Upgrade for a Keystone Carbon 417
    The Keystone Carbon 417 should have a 35" axle spread which can be confirmed by measuring from the center of each axle. In which case, we have options from both Dexter and MORryde. The MORryde Rubber Equalizers for Triple Axle Trailers part # MR39ZR and Dexter E-Z Flex Suspension Kit part # K71-657-00 are both great choices. I recommend Dexter as it comes with the shackle straps and wet bolts so it's more of a complete kit and the shackle straps are much ticker than normal for increase rigidity.
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • How to Determine Which Dexter E-Z Flex Equalizer Kit is Correct for a Trailer
    To determine which Dexter E-Z Flex suspension system you need for your trailer you will simply need to choose whether your trailer has tandem or triple axles, as well as the length of your current equalizers. For a tandem axle trailer we have part # K71-652-00 which is 5-5/8" long, and part # K71-653-00 which is 7-3/4" long. For a triple axle trailer we have part # K71-656-00 which is 5-5/8" long, and part # K71-657-00 which is 7-3/4" long. I have attached some installation and review...
    view full answer...
  • Recommended Suspension Kit and Leaf Springs With 34 Inches Between U-Bolts
    Based on the measurements you have given, the correct kit would be the # K71-657-00 Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Triple Axle - 8,000 lbs. You want to use the short equalizers. The hangers you have are designed for the 7-3/4" short version. It is critical because if you use the wrong size equalizer the springs will not compress and operate correctly. It would move the shackles into a horizontal position which would not allow the suspension to cycle. It should look...
    view full answer...
  • Which EZ Flex Trailer Suspension Kit Fits a Triple Axle Trailer
    The E-Z Flex Heavy Duty Rubber Suspension System # K71-652-00 is designed for a tandem axle trailer. For a triple axle trailer you will need either # K71-657-00 with 7-3/4 inch long equalizers or # K71-656-00 with 5-5/8 inch equalizers. You would not use just one set on one axle of a triple axle trailer because it would create a poor ride on the trailer and could increase the stress on the other suspension parts. In your picture it appears that one of the equalizers is different causing...
    view full answer...
    Image 1 for
  • How Often Should Dexter EZ-Flex Equalizers Get Greased
    I spoke to my contact at Dexter and he informed me that they recommend greasing the E-Z Flex equalizers every three months or 3,000 miles. I also attached a pretty helpful guide to how often trailer components should be maintained. For grease Dexter recommends wheel bearing grease. For that we recommend the red grease part # L11390. A shock kit would help your trailer and would work well with the EZ Flex system but since you said you have square axles we don't have a kit for that. The...
    view full answer...
    Image 1 for
  • Instructions to Use with Dexter EZ Flex Equalizer Kit for Triple Axle Trailer
    While we don't have a set of printed instructions I can show you for the Dexter EZ Flex part # K71-657-00 that you referenced we do have install videos that we shot when we installed this kit on two trailers that I attached to this page.
    view full answer...
  • Recommended Equalizer, Leaf Spring, and Hardware for 2005 Weekend Warrior Suspension System Upgrade
    For your upgrade in trailer suspension on your triple axle Weekend Warrior toy hauler I recommend the E-Z Flex Triple Axle Suspension Kit with 7-3/4" Equalizers # K71-657-00. This kit comes with all the equalizers and hardware you need. Then you will use the 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long # e94SR and I recommend upgrading your axle u-bolts to the # APUBR-9. You will use the following quantities: 1-E-Z Flex Kit 6-Leaf Springs 3-U-bolt Kits This update...
    view full answer...
    Image 1 for
  • Dexter E-Z Flex Suspension Upgrade For Triple Axle Trailer With 13-126 Equalizers
    Yes, the Dexter E-Z Flex Suspension Kit # K71-657-00 is the correct kit to upgrade your triple axle trailer which currently utilizes the 13-126 equalizer. Both these are designed for axle spacings 35" apart.
    view full answer...
  • Suggested Equalizer Upgrade Kit for Triple 8,000 Pound Axles with 33 Inches of Spacing
    As the Dexter # K71-657-00 is rated for 35 inches of axle spacing, I do not suggest using it. However, we do have a MORryde system that will work with your spacing. The MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33" Wheelbase - 8K # MR59ZR is specifically designed to be used with 33 inches of axle spacing and 8,000 pound axles. The MORryde Suspension Upgrade Kit # MR86ZR would then complete this kit and get you up and running.
    view full answer...
  • What Type Of Nuts Are Used With the Dexter E-Z Flex Suspension Kits
    The E-Z Flex Triple Axle Suspension Kit part # K71-657-00 comes with both flange nuts part # 006-092-01 and lock nuts part # 006-007-01. The flange nuts which are essentially a nut that has an integrated washer that reduces the chance of loosening because the clamping force is more evenly distributed around the nut are used on all of the wet bolts whereas the lock nuts are used on the standard bolts. The wet bolts are used to connect the leaf springs to the equalizers whereas the standard...
    view full answer...
  • Upgraded Equalizers for 2019 Eclipse Attitude Toy Hauler
    Hey Larry! To find the right upgrade you need to measure your existing equalizers. The best option is the one that matches what you have now to ensure you keep the same geometry on your suspension. I do like the Dexter E-Z Flex # K71-657-00 and have it on my Jayco. They use pretty standard measurements so if you match the picture below this is the way to go. The most important measurements are left to right on center. For the longer equalizer that is 8-3/8" and the shorter traditional...
    view full answer...
  • Recommended Equalizer Shocks For Triple Axle 4200 Cyclone Toy Hauler
    For your triple axle on your 4200 Cyclone toy hauler, I recommend the E-Z Flex Triple Axle Suspension Kit with 7-3/4" Equalizers # K71-657-00. This system includes the wet bolts, metal bushings, and shackle straps. This system is also available with 5-5/8 inch equalizers # K71-656-00. Another great option to consider is the Equa-Flex Cushioned Equalizers w/ Bronze Bushings - Double Eye Springs - Triple Axle - 5K to 8K # LC279689. These are very similar with the metal bushings, but does...
    view full answer...
  • Recommended Fix for Triple-Axle 5th Wheel Toy Hauler Surging & Bouncing
    The 15,172-lb unloaded weight of the Forest River triple-axle toy hauler 395AMP is potentially getting pretty close to your Silverado 2500's towing limit by the time the trailer is loaded up, so the first thing I suggest is making sure the trailer is loaded in such a way that you have enough pin weight. Too little pin weight can lead to handling issues like sway and bounce. 5th wheel pin weight should be 20-25% of the gross trailer weight. When transporting several 4-wheelers, for example,...
    view full answer...
    Image 1 for
  • Which Dexter EZ Flex Kit for 2009 Weekend Warrior Triple Axle
    For a triple axle trailer with 6k rated axles the correct Dexter EZ Flex is the part # K71-656-00. The # K71-657-00 would be for 8k axles. I attached an install video for this kit for you to check out as well.
    view full answer...


< Previous



Do you have a question about this Trailer Suspension Part?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B
Employee Michael B
Installed by:
Michael B
Employee Wilson B
Updated by:
Wilson B
Employee Noah M
Updated by:
Noah M
Employee Carrie F
Updated by:
Carrie F
Employee Shane H
Test Fit:
Shane H
Employee Jacob H
Video by:
Jacob H

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.