How to Determine Correct Equalizer Upgrade For Triple Axle Toy Hauler

Updated 03/02/2026 | Published 10/22/2024

Products Featured in This Question

Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Triple Axle - 8,000 lbs

(625)

$810.20

4-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/8" Long

(2331)

$63.82

MORryde Rubber Equalizers for Triple Axle Trailers - 35" Wheelbase - 8K

(865)

$360.26

MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" Long Shackle Straps

(2240)

$158.19

Question:

I have an attitude 32gsg. Burner pull triple axle toy hauler 9500 dry. Looking to upgrade suspension. Not sure which kit I need. Thank you

asked by: Scott W

Expert Reply:

Hey Scott,

While we don't have a way of knowing which equalizers are on your triple axle Attitude toy hauler, we can help you figure out the right ones to upgrade your suspension. It's pretty simple, as all you have to do is measure your equalizer from center-to-center of the bolt holes horizontally, as well as the height from the middle of the equalizer to the center of the top bolt hole.

For example, if you measured your equalizer and it was 7-3/4" long and 2-7/8" tall you could use the Dexter E-Z Flex Suspension Kit # K71-657-00.

I have added a diagram below showing this kit and how it measures so you can see what you need to measure on your own suspension. I have also added a link below to our entire selection of upgrade kits for triple-axle trailers, or if you let me know the measurements you have I can try and find the best kit for you.

expert reply by: Kyle S

Dexter E-Z Flex K71-657-00
(click to enlarge)

Scott W.

10/23/2024

Thank you so much for the response. I will measure this Weekend. The springs look to be sagging as well because the tires are rubbing on the underside of trailer, which is no good I was looking at the cre3000 at least I think that’s the right number.

Kyle S.

10/23/2024

@ScottW Sounds good; you're welcome to drop a comment here when you find the measurement if needed and I can help you out.

Scott W.

10/26/2024

Good afternoon. So I took some measurements I have 8” between spring shackles. 35 inch wheel base. The shackles are 2 1/4 The springs are 4 leaf. They measure 26 inches loaded. 6,000 lb lippert axle. So according to my calculations I need the following parts Moryde MR39R equalizer for triple axle Moryde MR86ZR shackle kit E47Sr spring. Does that look right?

Kyle S.

10/28/2024

@ScottW Yep, you got it! Appreciate the measurements you took and I can verify you do have the right parts: - MORryde Rubber Equalizers for Triple Axle Trailers - 35" Wheelbase - 8K # MR39ZR - MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" Long Shackle Straps # MR86ZR - 4-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/8" Long # e47SR

Scott W.

10/28/2024

@KyleS good Morning, Thank You For The Quick response. Would you recommend these parts or should I be looking at something else? I was just searching your website

Kyle S.

10/28/2024

@ScottW Happy to help and yeah, those would be great. MORryde is definitely high quality, and you're going to get a much better ride overall compared to your current suspension.