See what our Experts say about this Optronics Trailer Lights

• Wireless Towing Lights That Can Be Used On A Trailer
  Hi Dick! We do have a couple options for you, but they are listed under flat towing lights, which is why you weren't having luck finding them on our site. So with that said, check out the following two options: Universal Magnetic Tow Lights w/ Wireless Transmitter and 4-Way Flat Trailer Connector - Red LEDs # C6304 Optronics Wireless Magnetic LED Trailer Lights Battery Powered Stop/Turn/Tail Kit with Transmitter # OPT88UB Both of these have magnetic bases and are technically wireless....
  view full answer...
• Left Side Trailer Lights Not Working With New LED Trailer Lights Installed
  The first thing that I would recommend checking are the ground connections for the trailer side connector and the lights. Poor ground connections are the most common culprit of trailer wiring issues. The lights will have either a ground wire or they will ground through the mounting hardware. Each of the ground connections should be secured to a clean, bare metal surface on the trailer frame or to the negative terminal of a trailer battery if you have one. If the ground connections check...
  view full answer...
• Troubleshooting New LED Tail Light Not Working When Connected To Trailer
  It sounds like based on the description you provided of the issue that one white ground wire is not working on your new LED tail lights. I would first make sure that the connector on your new LED light that is having the issue does not have any debris in it causing the connection issue. Next check the ground wire going to that light and make sure it is securely connected to clean corrosion free metal. Ground wires being loose can cause all sorts of havoc. If these steps do not fix the...
  view full answer...
• LED Replacement Lights for Peterson M444
  We do have a couple of really good options for you to replace your Peterson # # PM444L and # PM444, but you do have a keen eye because the Tail Light Kit # TLL16RK will not work with the 2-1/4" spacing you have. One of the lights would interfere because it is too long overall and the back of the light cannot be rotated. Instead, for a couple of similar options that have 2" on center spacing and the needed space for you to mount them I recommend checking out the LED Combination Tail Light...
  view full answer...
• All LED Lights on Trailer Work Except Running Lights When Hooked To 2008 Chevrolet Silverado
  There are a few possibilities and things you will need to check on your trailer and your vehicle. You will want to start by checking the ground wires on the lights, make sure each light has a good ground connection to clean metal surface. Then, you will want to check the wiring on the trailer, start at the 4-way connector and visually inspect the wires for any cut or exposed wiring. If you find cut or exposed wiring where the protective coating on the wiring is missing, you will want...
  view full answer...
• LED Tail Light Replacements for Jayco Eagle Pop-Up Camper
  We do carry a large selection of LED tail lights and we will undoubtedly have ones that will work for your 2000 Jayco Eagle M-12 UDK pop-up camper, though we do not have a parts list available for specific trailers. The best way for you to find new LED lights would be to measure your current lights and find a close match. For example, tail lights # TLL12RK are 7-9/16" long x 2-3/4" tall x 3/4" deep and recess mounted, while # TLL9RK are 5-1/16" long x 4-9/16" tall x 2-5/8" deep and surface...
  view full answer...
• Availability of a Submersible Trailer LED Light Kit
  For a waterproof LED light kit you would want to use # TLL9RK. I can verify that his kit is listed as waterproof which would include it being submersible. The # STL28RB & # STL29RB is comprised of lights not listed as submersible as you have said.
  view full answer...
• Recommended LED Taillight Kit for a Trailer that is DOT Compliant
  If you are looking for an LED taillight kit for a trailer that is DOT compliant then I recommend the LED Trailer Light Kit with 25' Wiring Harness part # TLL9RK. This kit comes with two waterproof taillights, a 25' long 4-way trailer connector, a license plate bracket, stainless steel mounting hardware, and quick splice wiring connectors.
  view full answer...
• LED Trailer Taillight Recommendation for 1981 Calkins Boat Trailer
  Hey David, I pulled up a few pictures of Calkins boat trailers and they look to have the standard square trailer taillights that are super common so for a kit to convert them to LED you would want the part # TLL9RK. Is this the style of light your trailer has on it?
  view full answer...
• Looking For New Tail Light Kit For Karavan Platinum Utility Trailer
  Hello David, thanks for reaching out. We do have some lights that may work for you including tail lights, marker lights and a light bar. We do not have all of this as one all-inclusive kit, but we do offer what you are looking for. There will be different options depending on what size or style of light you need. Here are my recommendations: - LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger # TLL9RK - Optronics LED Clearance or Side Marker...
  view full answer...
• Best 4.80-12 Trailer Tires For Highway Speed
  Okay, let's go ahead and start with the best 4.80-12 trailer tires for highway speeds, and for that you want a radial tire because they run cooler and flex more than bias tires. The best option for this is a tire from Taskmaster: - Taskmaster 4.80R12 Radial Trailer Tire # TT48012C The # TT48012C has an 81 mph speed rating, the highest for this size tire, and is a load range C tire that has a 990 lb per-tire rating (so 1,980 lbs for two tires). As for a wheel and spacer, there really...
  view full answer...
• LED-Type Replacement Trailer Lights for Featherlite Enclosed Gooseneck Trailer
  Trailer makers do not maintain detailed specs on the smaller items like the lights they use in production of their trailers so you can refer to the linked page that displays all of our LED-type trailing lighting. Just click on the type of light you want - such as a side clearance light or a taillight - to see the products in that category. You can use the filters on the page to narrow down the items displayed to those with the shape, color and even the dimensions you need. You can also...
  view full answer...
• Replacement Tail Lights For a 2004 Sea Lion Boat Trailer S 16-1500
  Thank you for the picture that is very helpful since I cannot always see what trailer manufacturers used on their trailers. The LED Combination Tail Light Kit # TLL9RK may be your best option depending on the condition of your current wiring. This kit includes both tail lights, a license plate bracket and 25' of wiring for the tail lights. If your wiring is still in good condition the Drivers # STL9RB and Passengers # STL8RB side tail lights are available separately. I do recommend using...
  view full answer...
  
• How Does the Submersible, Under 80" LED Trailer Light Kit part # TLL9RK Wire to Trailer
  For the assemblies that come with the Submersible, Under 80" LED Trailer Light Kit part # TLL9RK that you referenced the white wires will need to be grounded, the brown wires will run to the running lights circuit, the green wire will run to the right stop/turn circuit and the yellow wire will run to the left stop/turn circuit. I attached a picture that has a standard trailer wiring diagram that should be helpful for you. The distance between the mounting studs is 2 inches.
  view full answer...
  
• Replacement Tail Lights on Malone Microsport XL Kayak Trailer
  Yes. The tail lights on the Malone Microsport trailers like the # MPG460XT are submersible. You can use the # STL28RB & # STL29RB to replace these lights with another submersible light or go with a completely sealed and waterproof light set with the # TLL9RK. I do recommend going with the # TLL9RK waterproof lights just because of the added protection and durability you get with this application.
  view full answer...
• Lighting Requirements for 16-Foot Trailer That Needs New Lights and Wiring
  We can help you with new lighting and wiring for your 16-foot trailer. A trailer's type, size and weight determine the type and number of lights it must legally have to be compliant with DOT regulations. We have a helpful article that covers these requirements in detail and it is linked for you. I also linked an article on trailer wiring that shows how each different wiring connector type is set up. Our main pages for trailer lighting and wiring parts are included too. For a whole new...
  view full answer...
• Are the Waterproof, Under 80 inch LED Trailer Lights TLL9RK Completely Sealed
  I went out to the warehouse and pulled the Waterproof, Under 80 inch LED Trailer Light Kit, item # TLL9RK, to see exactly what Optronics means by waterproof. Upon initial inspection the housing itself is not water tight. Water can access the housing through the hole that the wires enter the light through and there is a drain hole at the bottom of the light near the center of the front lens. I then removed the front and side lenses and found that the led light system is encased (sealed)...
  view full answer...
  
• What Are the Overall Dimensions of the Optronics Under 80-Inch LED Trailer Light Kit # TLL9RK
  The Optronics stud-mounted LED Trailer Light Kit, part # TLL9RK, features left- and right-hand LED light assemblies that are DOT-approved and waterproof, and includes a 25-foot wiring harness, mounting hardware and connectors, and a license plate bracket. The driver-side light includes license plate illumination. These lights mount using two supplied steel studs (on 2-inch centers) and they use a 3-wire system for electrical connection to your trailer wiring. Each light has a white ground...
  view full answer...
  
• Troubleshooting Trailer Taillights that Dont Blink When Running Lights are On
  What it sounds like is going on is that you have the wires from your trailer run backwards to the two illumination circuits of your trailer. This would explain why when the running lights are on the blinkers and stop lights aren't functioning. Since the harness of the lights has three wires you will need to make sure you are using all three of the wires. The running lights of your trailer should run to the wire on the lights that activates the lower intensity and the stop/turn circuit...
  view full answer...
• Can LED and Incandescent Trailer Lights both Be Used at Same Time
  A trailer can very easily have incandescent and LED lights at the same time. There is no issue mixing the two styles of lights. If you added the trailer lighting kit part # TLL9RK that you referenced to your trailer you'd have no problems at all. I attached an install video for this kit for you to check out as well.
  view full answer...
• Trailer Side Marker Lights Not Working
  It sounds like you do not have the side marker lights properly grounded. If the lights have a separate ground wire to attach to the trailer frame it will need to be connected to a suitable point on the trailer frame. The closer to the light the better. If you light does not have a separate ground wire, then it is grounded through the mounting holes, and you will need to be sure that the light is mounted directly to the trailer frame and making a good connection. Use a circuit tester,...
  view full answer...
• Wiring a 2011 Victory Motorcycle and Trailer for Towing
  For simplicity, I would recommend wiring the motorcycle trailer as a vehicle trailer would be. A powered converter wiring kit, like part # C59496, would be connected to the motorcycle, which would provide a 4-pole trailer connector. The converter combines the brake lamp and the directional signal onto one circuit. The 4-pole connector utilizes four circuits, the white wire which is the ground, the green wire carries the right turn and brake light combined on one circuit, the yellow wire...
  view full answer...
  
• Replacement Side Marker Lens for Optronics LED Combination Tail Lights
  Thank you for the photos! It looks like you have the tail lights that come in the LED Combination Tail Light Kit # TLL9RK which means you're needing the Replacement Side Marker Lens # AL9RB.
  view full answer...
  
• Replacement Lights and Wiring for Haulmark Enclosed 5 x 8 Utility Trailer
  You can ensure your re-wired Haulmark 5 x 8 enclosed trailer has the legally-required lighting by referring to the linked article that covers DOT trailer lighting requirements. Another good way to proceed is to make sure you have no fewer lights/reflectors than what was installed by the trailer manufacturer. You may well be able to usefully install more lights for enhanced visibility but I do not recommend using any fewer. Trailer makers do not maintain specs on the smaller items such...
  view full answer...