bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Square
  5. LED Light
  6. Red
Miro-Flex LED Trailer Tail Light - 6 Function - Submersible - 18 Diodes - Square - Red - Passenger

Miro-Flex LED Trailer Tail Light - 6 Function - Submersible - 18 Diodes - Square - Red - Passenger

Item # STL28RB
Our Price: $32.25
Trailer Lights
Shipping Weight: 0.83 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
5-1/4" x 5" Square. Waterproof trailer light acts as brake, tail, turn, side marker, side reflex reflector, and rear reflex reflector. Mounts on surface of trailer. 3-Wire pigtail. Great Prices for the best trailer lights from Optronics. Miro-Flex LED Trailer Tail Light - 6 Function - Submersible - 18 Diodes - Square - Red - Passenger part number STL28RB can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1703)
  • Q & A (0)
  • Photos

Optronics Trailer Lights - STL28RB

  • Tail Lights
  • Square
  • LED Light
  • Red
  • 5-1/4L x 5W Inch
  • Surface Mount
  • Rear Reflector
  • Side Marker
  • Side Reflector
  • Stop/Turn/Tail
  • Submersible Lights
  • Optronics

5-1/4" x 5" Square. Waterproof trailer light acts as brake, tail, turn, side marker, side reflex reflector, and rear reflex reflector. Mounts on surface of trailer. 3-Wire pigtail.


Features:

  • Square RV tail light serves 6 functions
    • Stop light
    • Tail light
    • Turn signal light
    • Side marker light
    • Side reflex reflector
    • Rear reflex reflector
  • Sealed, waterproof construction is submersible
  • Miro-Flex faceted reflector design provides increased light output with a contemporary appearance
  • Durable surface-mount technology (SMT) construction of LED circuit board
    • Better withstands shock and vibration
    • Allows for improved heat distribution
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Molded plastic housing
  • Red and clear acrylic lenses
  • Mounts on surface of trailer
    • Hardware slides along rear channels so that you can adjust the position of the light
    • Stainless steel hardware included
  • 3-Wire design
    • 20-Gauge wire
    • White wire for ground
    • Brown wire for tail light
    • Green wire for stop and turn lights
    • Includes twist-on wire connectors
  • DOT compliant
    • Meets FMVSS 108 requirements in any 360-degree position


Specs:

  • Dimensions: 5-1/4" wide x 5" tall x 2-5/8" deep
  • Mounting hole dimensions (center to center): 2"
  • Diodes: 18
  • Power draw at 12.8 volts:
    • Stop/turn signal light: 0.174 amps
    • Side marker light: 0.054 amps
  • Lifetime warranty on LEDs


light dimensions

Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.



STL28RB Optronics Miro-Flex LED Trailer Taillight - Right Side - Red Lens

Alternate part number: STL-28RB




California residents: click here



Customer Reviews

Miro-Flex LED Trailer Tail Light - 6 Function - Submersible - 18 Diodes - Square - Red - Passenger - STL28RB

Average Customer Rating:  4.8 out of 5 stars   (1702 Customer Reviews)

5-1/4" x 5" Square. Waterproof trailer light acts as brake, tail, turn, side marker, side reflex reflector, and rear reflex reflector. Mounts on surface of trailer. 3-Wire pigtail.

by:

Here are pictures of the LED tail lights and marker lights that I installed after refurbish this 20' gooseneck trailer.



by:

Still in good shape after a year of saltwater baths



by:

One year later and these LED submersible boat trailer lights are still working like the day I installed them.

Gerald

8/2/2022

These lights have worked flawlessly on my boat trailer for several years down. Love them.



by:

E-Trailer resolved order problem instantly.....Thank You A++++++



by:

STL28RB & STL29RB
Right and Left LED
Brake/Turn/Tail/License plate lights
Nice bright LED light. Cheaply made, all plastic back housing but unless you can find the older (80's/90's) lights, your stuck with "made in Japan"



by:

I pull a 26 ft boat from Florida to Upstate NY every summer. I travel busy Interstates as well as country roads and always manage to find some pretty nasty weather where the visibility is very poor. The Optronic Micro-Flex tail lights give me a good feeling that the guy behind me, sees me and sees my brake lights and directionals. One of the new lights had moisture in it the first time I launched. etrailer was quick to send me a replacement under warranty, Thank You



by:

Product was good, only issue it that e-trailer sent me a used or returned item. Everything work just fine. This light had some cog webs inside the mounting area.



by:

Bought a new brake controller and updated all the lights to LEDs , all parts are good quality. Would recommend etrailer



by:

These lights are BRIGHT and RELIABLE! I am so happy that I don't have to keep constantly checking my trailer lights to make sure they are still working.



by:

Great product, works excellent! Shipping and handling fast and without any problems. Will be ordering RV TOWING parts soon.



by:

Great light. Very bright. Glad I could get a single side replacement for one that was damaged on trailer.



by:

Great replacement light. Installation is easy. I bought this to replace the passenger side I caught on the side of my building.



by:

Very nice taillights. Very bright. Seem to be well made.



by:

lasted less than 11 months on boat trailer with moderate use. Would not recommend.



by:

received product fast. convenient way to shop. great selection.good follow up by Rose G.



by:

HADN'T GOT THEM ON YET ,BUT ORDERED 10:00AM TUESDAY AND GOT THEM 10:30AM WEDNESDAY. GREAT SHIPPING IS ONE THING I CAN SAY ABOUT ETRAILER.WILL ORDER AGAIN IF I NEED ANY TRAILER STUFF.



by:

Great quality, wonderful service and will be buying from you again. Thank you.



by:

Quality item at a good price. Fit in same bolt holes as old lights.



by:

One year later still working and looking great.



by:



by:



by:

great



by:

As advertised



by:



by:


25
1648
Show More Reviews

See what our Experts say about this Optronics Trailer Lights

  • How To Determine Correct Replacement Passenger Tail Light For 2005 Stratos 285 XL Bass Boat Trailer
    I would be happy to help you find the correct replacement passenger side tail light assembly for your 2005 Stratos 285 XL bass boat trailer, but you will need to measure your current light as we unfortunately do not have a breakdown of lights used on a specific trailer. For example the Miro-Flex LED Trailer Tail Light - 6 Function - Submersible - 18 Diodes - Square - Red - Passenger # STL28RB are an LED light that measures 5" tall x 5-1/4" wide as shown in the included diagram. If this...
    view full answer...
    Image 1 for
  • Replacement 5 inch Trailer Light
    Some of our most popular 5 inch x 5 inch trailer tail lights come from Optronics and can be found with part # STL9RB for the Driver Side or part # STL28RB for the Passenger Side. These are submersible 18 Diode LED Square Lights. If these are not the correct style or fit I have also attached a link to our selection of trailer lights for you to filter through.
    view full answer...
  • Replacement LED Tail Lights for EZLoader Trailer
    One way you can find the right tail lights for your trailer is to measure the mounting points and then measure the tail light itself. Also, take note of the shape of the lights you have, such as round, square, or rectangular. I have attached a link to the LED tail lights we offer for trailers. You can use the filters on the page to narrow down your search and find the right tail lights for your trailer. Some of the lights may not have the same dimensions but if the mounting holes are...
    view full answer...
  • Wiring Installation for Miro-Flex LED 3 Wire Trailer Lights
    The Miro-Flex LED Combination Trailer Tail Lights # STL28RB & # STL29RB have a separate white ground wire with ring terminal because the mounting hardware is surrounded by plastic not giving the light a solid ground connection. The ring terminal over the mounting hardware works around this to connect the light to the trailer frame. This ground wire doesn't need to be on the mounting hardware and can be attached directly to the trailer frame with a different screw or bolt if desired. The...
    view full answer...
  • Replacement Lens for the Miro-Flex LED Trailer Tail Lights Part # TLL28RK
    The replacement lenses for the Miro-Flex LED Trailer Tail Lights part TLL28RK are no longer available. You will instead need to replace the entire assembly using part # STL28RB for passenger's side or part # STL29RB for driver's side.
    view full answer...
  • Recommended Durable Square Trailer Tail Lights for Boat Trailer
    The most popular trailer tail lights we offer are from Optronics, they are very well reviewed and one of the leaders in trailer lightening. I recommend using the Miro-Flex LED Combination Trailer Tail Lights part # STL28RB & # STL29RB which are submersible so they are great for boat trailers. Please note, any light can fail but you can prolong their life by unhooking the lights just a few minutes before you launch the trailer as the heat from the bulbs can suck water into the tail light...
    view full answer...
  • Mounting Dimensions of Miro-Flex LED Trailer Tail Lights
    The mounting dimensions of the Miro-Flex LED Trailer Tail Light # STL29RB and Miro-Flex LED Trailer Tail Light # STL28RB are exactly the same - they have mounting studs which are 2" apart on center. These are exactly the same lights with the only difference being that Tail Light # STL29RB has a license plate light function because it is the driver's side tail light. Apart from that both lights have mounting studs in the same location, both measure 5-1/4" wide x 5" tall x 2-5/8" deep...
    view full answer...
    Image 1 for
  • Bright LED Trailer Taillight Recommendation
    The Miro Flex LED Trailer Taillights # STL28RB & # STL29RB have 38 diodes which are incredibly bright. This would be a great solution for what you are looking for. I attached a picture that shows just how bright these are installed on a PWC trailer.
    view full answer...
    Image 1 for
  • Will Replacement LED Tail Lights on Boat Trailer be Compatible with Current Incandescent Lights
    There is no harm in using LED Tail Lights, like part # STL28RB & # STL29RB, along with incandescent lights on your boat trailer. They will work just fine together. I am linking our selection of LED tail lights for you to look through but if you can let me know the dimensions of the lights your are wanting to replace I can see if we have a similar LED option available.
    view full answer...
  • Can I Use LED and Incandescent Lights on My Trailer Together
    Yes, you most certainly can use LED and incandescent lights together on a trailer. I have linked our selection of trailer lights for you to check out. If you need to choose some lights if you just let me know what dimensions you are looking for and I can make some recommendations for you.
    view full answer...
  • LED Trailer Wiring Set Recommendation for Replacing Lights with 3 Wires
    The Miro-Flex LED Tail Light Set # STL28RB & # STL29RB would be a great choice for you as they are an LED trailer taillight set that uses three wires. The white is ground, the brown is taillight, and the yellow is for left stop/turn and the green right stop/turn.
    view full answer...
  • Installing LED Trailer Light with Black, Red, and Green Wires
    Typically with an LED light that has a black, red, and green wire the black wire is for ground, the red wire is for the turn/brake light circuit, and the green wire will go to the running lights circuit on the trailer. If you can tell me what model LED lights you purchased I will be happy to verify this for you.
    view full answer...
  • Submersible Trailer Tail Lights For Boat Trailer
    That is a great question, I have a solution for you below: **Miro-Flex LED Combination Trailer Tail Lights - Submersible # STL28RB & # STL29RB. Not knowing the exact light you have and based off of your information given the light is either water resistant or not at all. I recommend replacing the unit with a water proof light like the ones listed above. These tail lights are submersible and will replace both driver and passenger side tail lights. The LEDs will last a very long time...
    view full answer...
  • Replacement Square Trailer Tail Light Without License Plate Light
    We do! The Optronics Combination Trailer Tail Light # STL29RB you were looking at is the driver's side with that license plate light so the equivalent of that is part # STL28RB which is designed for the passenger's side so it doesn't have the license plate light. Attached is a review video for both lights for you to check out.
    view full answer...
  • Does Optronics Trailer Tail Light STL-9RB have an IP67 Rating
    A submersible light such as # STL9RB is sealed and waterproof. This light is not given an IP rating but if to get an IP rating of 67 something must meet NEMA code 6 then these lights would do the trick. For a set you can use # STL28RB & # STL29RB
    view full answer...
  • Submersible Right Hand LED Trailer Tail Light Recommendation
    If you want a submersible tail light I would recommend the LED Submersible Trailer Stop, Turn and Tail Light, 6-Function, 11 Diode, Right Hand, part # STL8RB. The # STL28RB you referenced is not submersible, and I would not recommend it if you need a submersible tail light. You may also be interested in the LED Submersible Trailer Stop, Turn, Tail and License Plate Light, 7-Function, 14 Diode, Left Hand, part # STL9RB, if you needed the left hand version of the # STL8RB.
    view full answer...
    Image 1 for
  • Solution for Installing Trailer Wiring Where Wire Colors Are Different and Unknown
    So sometimes trailer wiring and taillight wiring end up using wire colors that are different from standard. It's frustrating but the only solution is to first verify what all of the functions of the wires are and then wire accordingly. You can use a vehicle battery to verify the functions of the lights first and then use a circuit tester like part # PTW2993 to verify wiring by having it connected to a vehicle and then test the wires while all of the taillight functions are applied.
    view full answer...
  • Replacement LED Tail Lights for 1990 Featherlite Horse Trailer
    You will be able to replace the incandescent lights on your trailer with LED without a problem. Like you said, you can just take the old lights out and replace them with new lights. If the Miro-Flex LED Combination Trailer Tail Lights - Submersible # STL28RB & # STL29RB you looked at would be a great choice assuming they are the style and size you want. These are surface mount lights so they will be able to mount in most places without a problem. The dimensions of these lights are 5-1/4"...
    view full answer...
  • Recommended Replacement Tail Light Assemblies for a Yamaha Trailer
    If your Yamaha trailer measures over 80 inches, then I recommend the Optronics Waterproof LED Trailer Light Kit, # TLL160RK. This light set is designed for marine trailer applications which means the unit is sealed and waterproof. The units are hard wired to your current trailer's lighting wiring and the units have separate ground wires. For a trailer that is smaller than 80 inches, I recommend the Optronics Micro-Flex LED Trailer Tail Lights, # STL28RB & # STL29RB. These light are square...
    view full answer...
  • Replacement Options for Miro-Flex LED Trailer Tail Light Kit # TLL28RK
    I was able to look back at your order and find that you purchased the tail light kit TLL28RK. You will need to replace one of the lights because the manufacture does not offer just the lens. The good news is you will not need to replace the entire kit though. For the left hand side you will need # STL29RB and for the right hand side # STL28RB. I have linked the above mentioned products to this page for your convenience.
    view full answer...
  • Replacement Tail Lights for an EZ Loader Boat Trailer
    I do not know exactly what lights your boat trailer came with nor would we have an exact OEM replacement but we do have the Miro-Flex LED Trailer Tail Lights part # STL28RB & # STL29RB which are a submersible LED tail light that should work well for you. The lights mount via two bolts placed 2" apart on center. The circuit boards are sealed, which means that water will not damage the diodes or circuit boards. The lights do not come with sealed wiring connectors but you can add them using...
    view full answer...
    Image 1 for
  • Availability of a Submersible Trailer LED Light Kit
    For a waterproof LED light kit you would want to use # TLL9RK. I can verify that his kit is listed as waterproof which would include it being submersible. The # STL28RB & # STL29RB is comprised of lights not listed as submersible as you have said.
    view full answer...
  • Recommended Replacement Tail Lights for a 2018 Bass Tracker Boat Trailer
    I have some great compatible replacement tail light options for a 2018 Bass Tracker Boat Trailer. For this, you can use the Optronics LED Combination Trailer Tail Lights part # TLL160RK if you have the rectangular style or the Miro-Flex LED Combination Trailer Tail Lights part # STL28RB & # STL29RB is you have the square style. If either of these don't match up with what you have please just send a photo and I'd be glad to see if we have a better option.
    view full answer...
  • Recommendations for Trailer Side Light Lens
    Without knowing which replacement lens kit you are looking at, I will give you the general rules. If it is the side of the tail light like # STL28RB & # STL29RB for instance, then the side lens will be red. If you mean the side of the trailer and are referring to the clearance lights, then they should be amber like # MCL95AB. I've attached an article to assist.
    view full answer...


< Previous
12



Do you have a question about this Trailer Light?


Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Tyler C
Written by:
Tyler C
Employee Jameson C
Expert Research:
Jameson C
Employee Rachael H
Expert Research:
Rachael H
Employee Adele M
Updated by:
Adele M
Employee Amy B
Updated by:
Amy B
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924