See what our Experts say about this Optronics Trailer Lights

• Recommended Amber Side Marker Light for Snowmobile Trailer
  I highly recommend the Optronics Sealed, Mini Rectangular LED Trailer Clearance, Side Marker Light # MCL95AB. This is an LED light which is 2-1/8" long x 1-1/8" wide x 1-1/16" deep and mounts by plated steel stud on base of light. It has gotten close to 200 reviews from our customers who have used it and a nearly 5-star review. I've added a link to a review video of the light for you to take a look at.
  view full answer...
• Will Optronics Trailer Taillight # STL008RB Fit Peterson Light Mounting Brackets
  If you have Peterson lights currently that look like the Optronics taillights part # STL008RB then the mounting brackets you have now will work just fine as these were made to be basically an exact replacement. We don't have any L-brackets though but instead you could go with the CE Smith trailer tail light protector part # CE26051A to mount it to your trailer.
  view full answer...
• Taillights to Replace Existing Wesbar 50010 on Ez Loader Trailer
  According to Wesbar, that lamp was discontinued around 2000 or so. Unfortunately, you'll need to replace the lamps but the good news is that Optronics makes a direct replacement LED lamp not terribly expensive. I'd recommend going with # STL008RB for the passenger side and # STL009RB for the driver's side. The LED lamps are fully sealed, so they'll be great for marine use. LED's draw a fraction of the power that incandescent bulbs do, and they are brighter and last MUCH longer.
  view full answer...
• Can the Optronics Passenger Side Trailer Light Be Used on the Drivers Side
  You can use the Optronics LED 5-function passenger side tail light # STL008RB on the drivers side but you will want to install it upside down because of the side marker light. But because of the designs of the lenses, if the light is installed upside down, it could affect how the light looks, therefore the visibility of the light. For a nominal cost though, you could get the Optronics LED 5-function drivers side tail light # STL009RB. I included a couple video reviews and a helpful article...
  view full answer...
• Optronics ONE Series Taillight for Passenger Side of Trailer that Matches # STL009RB
  We do have the passenger side Optronics ONE Series LED lamp. The part # is STL008RB.
  view full answer...
• Trailer Tail Light Wiring Colors and Functions for Optronics Tail Lights STL009RB, and # STL008RB
  You never want to wire anything up on a trailer based on color alone. This is because there is no official standard wire color/function used on trailers. On the lights that you purchased, # STL009RB, and # STL008RB, the green wire is right turn/brake lights, yellow is left turn/brake lights, brown is running lights, and white is ground. The bonded 4-Way you mentioned has the same functions per color listed above. The main trailer connector will need to be grounded to the frame as do each...
  view full answer...
• How to Replace Trailer Lights with the ONE LED Trailer Tail Light
  In order to receive a pair of the ONE LED Trailer Tail Lights you would want to use part # STL008RB for the passenger and part # STL009RB for the driver side. I also recommend using butt connectors for installation which can be found using part # DW05744-5. I have attached a review/install video on these lights for you as well.
  view full answer...
• LED Replacement Trailer Taillights for Peterson 440-15R
  The Peterson lights like the part # 432200 that you have are very standard in dimension. For an LED version of these all you'd need is the # STL009RB for the driver side and part # STL008RB for the passenger side. The mounting stud dimensions match too.
  view full answer...
• Can Trailer Light With Green and Brown Wire Be Replaced with Light with Additional White Wire
  Your old assemblies grounded the lighting circuit through the mounting hardware and the lights you are looking at, # STL008RB, ground with a ground wire strap. So you'd need to run the white wire back to the mounting stud of the light or to the frame of your trailer and it will function properly.
  view full answer...
• Connecting the Brown Wire for Running Lights
  Since you mention that you have a single function light like the LED Trailer Clearance and Side Marker Light, # MCL45RB, this will act solely as a brake light/turn signal, clearance or running light. If this light's purpose is to act as a running light and set up with power in left corner and ground in right corner, you will connect the brown wire in the left hand corner and the white wire in the right corner. Using this type of light you will still need a separate light for your left...
  view full answer...
• Will ONE LED Optronics Light Fit in the Light Guard Mounting Bracket
  Hey Steve, thanks for reaching out! Yes, the ONE LED Trailer Tail Light # STL008RB will fit great in the Light Guard # LG440NP. The light you're looking at is for the passenger side. For the driver side you'll need part # STL009RB. Let me know if you have any other questions!
  view full answer...
• Traditional Designed 4 Inch LED Trailer Taillight
  Although none of our suppliers offers a lamp like the # 432000 you specified in an LED version, we do offer a traditional design stud mounted LED lamp that could work for you. I'd recommend the # STL008RB for the passenger and # STL009RB for the driver side. The lamps are a bit larger, at just about 5 x 4-1/2 inches x 3 inches deep. If you have the space available, these lamps would be a good choice. I've linked to a demonstration video you might find helpful.
  view full answer...