See what our Experts say about this Stromberg Carlson Camper Jacks

• Replacement Rear 5K Scissor Jack for 2020 Forest River Salem 33TS
  There are a few different styles of scissor jacks, but we definitely have some that can be used to replace the 5K jack on your 2020 Forest River Salem 33TS. For your application I recommend going with the Leveling Scissor Jack # JSC-30-IND which has the same 5K rating and is able to provide up to a 30" lift. The foot style is also compatible with the JT's Strong Arm Jack Stabilizer Kit # LC191025 so you're good to go on that end as well.
  view full answer...
• Replacement Scissor Jack Recommendation for a 2018 Forest River Rockwood Mini Lite 2507S
  We have a handful of scissor jack options you can use as a replacement for your 2018 Forest River Rockwood Mini Lite 2507S but we don't have an exact part number for what came with your trailer. I recommend picking up the Stromberg Carlson 5K scissor jack with the 30" lift so you get the highest lift and a good, solid weight capacity at 5K per jack. Here are the part numbers for single and double kits: - Single Leveling Scissor Jack # JSC-30-IND - Leveling Scissor Jack Set # JSC-30
  view full answer...
• Recommended Cost Effective Leveling Jacks For 2014 Thor Four Winds Class C Motorhome
  The difference between stabilizing and leveling jacks can be confusing. Stabilizer jacks are just that, jacks used to provide stabilization to your motorhome to get rid of the motion you feel when walking around, and are not actually designed to be used to raise the motorhome like a traditional jack that you may think of. A leveling jack can be used to level the trailer and will be able to level your trailer along with stabilize it. For what you are looking to do on your 2014 Thor Four...
  view full answer...
• Recommended Leveling Jacks for 2018 Coachmen Freelander Motorhome
  I recommend the Leveling Scissor Jack Set - 24" Lift - 10,000 lbs - QTY 2 # JSC-24 for your 2018 Coachmen Freelander Motorhome. These have a weight capacity of 5,000 lbs per jack and can be used to both level and stabilize your RV. The # JSC-24 has up to 24" lift, so you will need to measure from the bottom of the frame on your RV to the ground to make sure that distance is less than 24". If you need a jack with more lift then I recommend the # JSC-30-IND instead since it has up to 30"...
  view full answer...
• Replacement Scissor Jack For A 2021 Jayco SLX 264bh
  When it comes to replacing the scissor jack on your 2021 Jayco Jay Flight SLX Travel Trailer The Leveling Scissor Jack - 30 inch Lift - 5,000 pounds # JSC-30-IND will be a good replacement for your Jayco Trailer. The leveling scissor jack has a weight capacity up to 5,000 pounds and will adjust between 5 inches to 30 inches, and the jack has a bow-tie base that will steady the jack on soft surfaces. This jack will bolt or weld on. These jacks are designed to stabilize a portion of your...
  view full answer...
• Scissor Jack Recommendation for Changing Spare Tire on Utility Trailer
  What you could use for a jack for changing a spare on your utility trailer is the Scissor Jack part # JSC-30-IND. This is rated to lift up to 5,000 lbs and would work well for you. You will also need the crank handle part # JCH-1.
  view full answer...
• Stabilizer Jacks Needed for a Military M101 A2 3/4 Ton Cargo Trailer
  When fully extended the Domar Trailer Jack, # TJ01RT, measures 18 inches from top of bracket to bottom of foot. We do not have a jack of similar construction that is longer but there are options. We carry 30 inch tall scissor style stabilizer jacks, # JSC-30 (single) and # JSC-30-IND (pair), that would most likely be a better fit with the 25 inch frame height on your Military M101 A2 trailer. This would most likely be the best option for you. We also have the stabilizer leg, # FSJ20324,...
  view full answer...
• recommended Scissor Jack Replacement For A 2016 Keystone Passport Ultra Lite Grand Touring 2510RB
  We have a few different options for your 2016 Keystone Passport Ultra Lite Grand Touring 2510RB Travel Trailer; you'll just need to measure the for the correct lift needed. The Scissor Stabilizer Jacks w/ Handle 5,000lbs - Qty 2 # TJSCHD-24 has a 18-3/4" lift. The Leveling Scissor Jack 5,000lbs # JSC-24-IND has a 24" lift. The Leveling Scissor Jack 5,000lbs # JSC-30-IND has a 30" lift.
  view full answer...
• Recommended Jack For Raising Sunray Travel Trailer To Change Tire
  To lift your trailer I recommend using a jack like the Powerbuilt Unijack, part # ALL620471. This jack has a 6,000-lb weight capacity and the lift range is between 11 and 21 inches. Scissor jacks like part # JSC-30-IND that you referenced are not recommended for lifting trailers and are to be used for stabilization only. You want to make sure the wheel on the other side of the trailer is chocked and not able to move when changing the tire.
  view full answer...
• Can Scissor Jacks be Used to Lift an RV 1 Foot Off the Ground
  Scissor jacks such as # JSC-30-IND are not meant to lift up vehicle or trailer so I do not recommend them for this application. What I recommend is to use leveling blocks such as # CAM44521 for a 10-pack. You can drive right up onto these blocks though it may be difficult to get it up to a foot tall without using a bunch of them stacked like a pyramid. Another option is to use a bottle jack such as # ALL640405 to lift the vehicle and then use the blocks or jack stands to hold the vehicle....
  view full answer...
• Scissor Stabilizer Jack Replacement for 2015 Dutchmen Kodiak 220RBSL
  The great thing about scissor leveling jacks like the # JSC-30-IND is that they are universal enough that you don't have to get exact match when replacing one like in your situation. So even if the # JSC-30-IND isn't exactly what you have now this will work great for you! I attached a review video for this for you to check out as well.
  view full answer...
• Determining Which Leveling Scissor Jack Fits A 2017 Rockwood HW276 Tent Camper
  The Leveling Scissor Jack - 24" Lift - 5,000 lbs # JSC-24-IND you were looking will likely work on your 2017 Rockwood HW276 Tent Camper, but you will need to verify that the amount of lift is correct for your specific trailer. The # JSC-24-IND has 24" of lift, so if from the bottom of the frame to the ground is less than 24" this will work perfectly. If you need more lift you can use the # JSC-30-IND instead. I included videos of the products mentioned for you to take a look at.
  view full answer...
• Recommendations for Leveling a Toy Hauler on an Uneven Driveway
  Once installed from the pin to the bottom of the foot is going to be under 8 inches tall so that is probably not going to be enough lift for you. Instead you could use something like a scissor jack, # JSC-30-IND, that offers 30 inches of lift. We also have some handy levelers, # UF48-979051, that you can use under the jack for additional height. A similar product would also work well. Take a look at the stabilizers # UF48-979004. With these you get height adjustment from 11 to 17 inches...
  view full answer...
• Recommended Stabilizers for RV Patios
  The only supports we have for a patio or slide out are the slide out supports like the Ultra-Fab # UF19-960001 or # UF19-960002 if there is a frame rail. You could alternatively use a scissor stabilizer jack like # TJSC-24 or # JSC-30-IND. The only other option I can think of is to use the Brophy Cable Camper Jacks - 57" Max Lift Height - 3,000 lbs - Qty 2 # CJ41 as a stabilizer. The Ultra-Fab Stackable Stabilizers for Small Trailers and Campers - 6,000 lbs - Qty 4 # UF48-979004 would...
  view full answer...
• Weight Capacity And Dimension For Stromberg Carlson Scissor Jack
  The scissor jacks we offer have weight capacity much higher than the 387 lb you stated you need. All of the jacks we offer are designed for RV use and are intended to be mounted with the top plate. The largest top plate we offer is on the Stromberg Carlson Jack, part # JSC-30-IND. This has a round plate that measures 9 inches diameter. Most jacks have a much higher lift range than the 7.874 inches you stated you need. The # JSC-30-IND has a lift capacity of 5,000 lbs, and does require...
  view full answer...
• Which Scissor Jack Can Be Used for Changing Tires on 3500 lb Trailer
  The scissor jacks we sell such as the # JSC-30-IND are meant to stabilize a trailer so it doesn't rock or pitch as you're walking around inside. The primary reason is that the jacks of this type that we carry aren't meant for changing tires is that the jacks are meant to be permanently installed on the underside of a trailer. If they're not bolted in place to the trailer frame, the jack could very easily slip off the jack and cause injury. A small bottle jack like # ALL640405 which has...
  view full answer...
• Replacement Front Manual Leveling Jack for 2007 Forest River RV
  An alternative mounting bracket design to the "wings" on the 5K Leveling Scissor Jack # JSC-30-IND is the Lippert 5K Jack # LC285332 which has a round plate on top with different bolt holes. If neither of these solutions work for your application feel free to shoot me a photo and I'll be more than happy to further assist you!
  view full answer...
• Can Scissor Jacks Be Used to Level a 24 Foot Heavy Duty Car Hauler Trailer
  Scissor jacks # UF48-979002 are meant to support weight but not lift it like you said so these jacks would not be the best option for your trailer. Scissor jack # JSC-30-IND is listed as having the ability to raise, lower, and stabilize so you could use it with handle # JCH-1. Or use drill attachment # UF48-979005 to speed up the process.
  view full answer...

Do you have a question about this Camper Jack?