See what our Experts say about this Stromberg Carlson RV Handrail

• Alternative Entry Steps for 2017 R-Pod 179
  The R-Pod 179 usually comes with a single-step pull-out stair unit like either 24-inch-wide Flexco # SMFP-1200 or the 20-inch # SMFP-1120. Both are single step assemblies but they differ in the amount of drop/rise. You may have enough ground clearance to install a different step, one that either has 2-steps to reduce the height of each step up, or one that has a better step height. You just want to ensure you do not reduce the trailer's ground clearance by installing a step assembly that...
  view full answer...
• Which Folding Handrail Is the Strongest? A Stainless Steel or Aluminum One?
  Hey Keith. The stainless steal Stromberg Carlson Folding Handrail item # AC-300 is going to be by far the strongest out of those three options. The item # AM-800 and item # AM-300 are both aluminum. The Stromberg Carlson item # AC-300 1" thick, measures 14-1/2" wide x 26-1/2" tall, and has a 200 lbs capacity.
  view full answer...
• What Had Rail will Replace Mine on My 2019 Lance TT model 1985?
  Hello Mike, It looks like most of the hand rails used to be a 8 screw design, but is now a 4 screw design. I attached an image of the Lend-a-Hand Folding Grab Handle for RVs - Silver Rail with Black Foam Grip - Aluminum # AM-300 of the old design so you can see how it used to use 8 screws. The Lend-a-Hand Folding Grab Handle for RVs - Silver Rail with Black Foam Grip - Aluminum # AM-300 you were looking at would be a great option, or we also have it in white # AM-200. When I look at...
  view full answer...
• Will the Lend-A-Hand AM-300 fit on my 2021 Wildcat T282RKX & Will I Need to Retrofit it?
  Hello Mike, Yes, the Lend-a-Hand Folding Grab Handle for RVs # AM-300 is a great added safety feature to any camper including your 2021 Wildcat T282RKX. The # T282RKX is installed into the door stud, the only time that it would need to be "retrofitted" is if you cannot locate the stud, at that time you would need longer screws and plates to securely attach it. You can check for the stud by using a stud finder, or by knocking on the outside to listen for the difference between the hollow...
  view full answer...
• How to Replace Spring Loaded Bolts for Stromberg Carlson Lend-a-Hand Folding Grab Handle
  In order to replace the spring loaded bolts inside the plastic mounting brackets for the Lend-a-Hand Folding Grab Handle # AM-300 you will need to first remove the handle from your trailer/RV. You can do this by unscrewing the 2 bolts that are securing each bracket to the RV and then simply pull the handle off. Once removed you will have access to the rear of the mounting brackets, which is open (see attached image), so you can both remove and re-install new bolts and springs like what...
  view full answer...
  
• Could Lend-a-Hand Folding Grab Handle Lock You in RV
  Your concern about being potentially trapped inside your RV is certainly a valid one, and also a common one with the Stromberg Carlson Lend-a-Hand. While there isn't a way to easily stop it from pivoting across the front of the door, there truly is nothing to worry about here as it will not trap you inside your RV. If some mean individual did try and do that to you for some reason, all you would need to do is push your door open and the handle will flip back into place without issue. I...
  view full answer...
  
• Replacement Fold Away RV Grab Handle For a Nash 23D With ITC Stow and Go Handle
  The Camco Fold-Away RV Grab Handle # CAM42176 is going to be the closest to your ITC Stow and Go handle 86472-2. The Camco is 26-3/4" from the top of the upper mounting bracket to the bottom of the lower bracket against the wall. The ITC is 27-1/4" from the top of its upper mounting bracket to the bottom of the lower mounting bracket. The Lend-a-Hand Folding Grab Handle # AM-300 that you found is only 24" tall overall so one set of mounting holes would need to be patched.
  view full answer...
• How High Do You Place The Top Of The Handle For the Lend-a-Hand Folding Grab Handle # AM-300?
  The Lend-a-Hand Folding Grab Handle # AM-300 does not require a specific height where it must be mounted. Typically you will mount the top handle just above the door handle or in place of the upper mounting holes on your factory grab handle. This will help to reduce any visible holes after the new handle is installed. I recommend also checking with how the handle feels going out of the camper and down the steps as this is generally when the handle is most important. You want to be able...
  view full answer...
• Removable Handrail Compatible with Lippert Solid Step # LC678027
  The SolidStep Manual Fold-Down Steps # LC791575 does not have a handrail that is available as an add on part. However, you may want to consider using the Aluminum Hand Rail for 4 Step Scissor Stair # AHR4 that will give you a 43 inch removable handrail. You will need to determine how to attach it to the steps as it is designed for the scissor steps. I've attached a video to assist. Your other option is to use a folding handle that may be longer than your current RV handle. For this...
  view full answer...
• Availability of Short Grab Handle for RV Door
  We have a 24" version with the Stromberg Carlson Folding Handrail which is the same thing just from a different manufacturer, but not that exact one from Camco. Here is a list of the Stromberg Carlson options that we have: Stainless Steel - # AC-300 White - # AM-200 Black - # AM-800 Silver - # AM-300
  view full answer...
• How Does a Lend-a-Hand Folding Grab Handle Install
  The Lend-a-Hand Folding Grab Handle # AM-300 that you referenced installs with 2 screws on each mounting bracket. If you look at the brackets you should see 2 holes that screws will go through and then screw into your trailer. To remove or tighten these screws you will just need to get a Philips head screw driver and tighten/loosen the screws.
  view full answer...
  
• Availability of RV Folding Grab Handle with Metal Mounting Brackets
  As you can see from the product reviews (some of them sent in after a year), the Stromberg Carlson # AM-300 grab handle you referenced is pretty highly rated by our customers. We haven't had any reports of failure. A folding grab handle with aluminum brackets, part # AC-300 is available as well, which sounds more like what you're looking for.
  view full answer...
• Recommended Lippert SolidStep 4-Step Model for 5th Wheel Trailer 29-3/8 Inch Inside Door Measurement
  Based on the RV door measurements you provided, I recommend going with the Lippert SolidStep Manual Fold-Down Steps # LC791574. This particular 4-Step model is designed for 26" to 29-7/8" wide RV doors but it will work with the slightly larger dimensions you mentioned, as it features an adjustable flange that will allow it to fit just fine. This is a really nice, stable 4-step assembly with adjustable legs that will let you keep the steps level to reduce any bounce or movement when getting...
  view full answer...
• Will SolidStep Manual Fold-Down Steps Fit a 2014 Keystone Laredo
  1: Thank You! We appreciate the comments about our site. 2: If you have a 30" to 36" inch opening then you could certainly use steps # LC791575 but for 26" to 29-7/8" use # LC791574 . 3: I am confident the steps will work with little to no modification of the steps or the RV. 4: There isn't an LED light option for these particular steps. That is something you normally see on powered RV steps but not the manual ones. 5: There are handles that can mount to the RV but not to the steps....
  view full answer...
• Can Lend-a-Hand Folding Grab Handle # AM-300 Safely Fold Over Trailer Door During Travel
  I spoke with my contact at Stromberg Carlson and she confirmed that the Lend-a-Hand Folding Grab Handle for RVs # AM-300 referenced in your question will work just fine for this application. It is perfectly safe to fold over the rear door of your trailer during travel to avoid contact with the awning arm. The four 2 inch screws needed for installation are included.
  view full answer...
• Will Lend-a-Hand Folding Grab Handle Mount to Camper With Right to Left Opening Door
  I walked out to our warehouse to look at part # AM-300, and found that it will fold in either direction so that you can use it on a door that opens left to right, or from right to left like your door opens. The mounting screws are offset because there is a spring actuator inside the plastic that is directly in the middle that allows you to fold the handle. The Lend-a-Hand Folding Grab Handle, part # AM-300 will work on your Lance Pickup Camper with door that opens from right to left.
  view full answer...
• Recommended SolidStep Manual Fold-Down Steps for RV
  We have the 20 inch wide quad # LC791574 with wider frame, and the triple step # LC791572. There is a lift assist with these steps available from Lippert # LC733937 which make it easy to lift the steps into place. The steps just fold into the door frame and lock into place. They have side to side leveling and the leg extensions are adjustable to keep steps parallel. This step is often used with a hand rail like the Lend-a-Hand Folding Grab Handle for RVs - Silver Rail with Black...
  view full answer...
• Can the Lend-a-Hand Folding Grab Handle for RVs AM-300 be Set to Swing One-Way Only
  Stromberg and Carlson didn't have pranksters in mind when they made the Lend-a-Hand Folding Grab Handle for RVs # AM-300. They designed it to be easily installed on either side of your RV door with the 4 screws that are included. It does not come with a way to lock one side, so it will continue to be able to adjust either way once it is installed.
  view full answer...
• How Does Lend-a-Hand Folding Grab Handle # AM-300 Attach to Travel Trailer Typically
  The mounting brackets on the Lend-a-Hand part # AM-300 have mounting holes that allow you to run either the included screws through or if you needed to come up with a better nut and bolt setup based on the application you can do that as well. You will need a flat surface for this to mount to though. Aside from that it really can be made to fit most applications.
  view full answer...
• How Easily Does Lend-a-Hand Folding Handle Fold
  The Lend-a-Hand # AM-300 folds by simply pulling up on the handle and folding it to one side or the other. There are no tools or bolts necessary.
  view full answer...
• How Do I Access the Internals of the Lend-a-Hand Folding Grab Handle, part # AM-300
  I went out and pulled a Lend-a-Hand Folding Grab Handle For RVs, part # AM-300, from our warehouse. I took it out of the packaging and found that the only way you can access the internal pieces is to have the # AM-300 removed from your RV. The backside of the mounting bracket is open and you can easily access the internals of the handle once it is removed from your RV. While I was inspecting the # AM-300 I came to the conclusion that the most likely reason your handle would not lock...
  view full answer...
• Solution for Holes Left Behind On Camper When Replacing Handle with Lend-a-Hand Grab Handle
  If you are replacing an existing handle to install the Lend-a-Hand Folding Grab Handle # AM-300 on your camper then you will indeed have a couple of pre-drilled holes leftover that can be easily cleaned up. To cover up the holes I simply recommend using some caulk/sealant like # 0160297 for an easy and clean application. I have attached a short video review on this handle that you can check out as well.
  view full answer...
• Can The Lend-a-Hand Folding Handle for RV, # AM-300, Fit On Both A Right Hand And Left Hand Door
  The Lend-a-Hand Folding Grab Handle for RV, # AM-300, is designed for a right hand door that will open left to right. I called the manufacturer (Stromberg-Carlson) and they said that because of the design of the hinge with the spring actuator in the middle of the hinge that allows you to fold the handle, the mounting holes had to be offset to one side. They said that the right hand door was used more on RVs than a left hand door. It can be used on a left hand door application, but if you...
  view full answer...
• Adjustable Platform Step recommendation For 2004 Jayco 23B Trailer
  For your 2004 Jayco 23B trailer I recommend the Adjustable-Height Folding Plastic Platform Step, part # S-150. This has adjustable height legs that let you change the step height from 4 inches to 8 inches. It also features a 24 inch by 16 inch platform and has an open-grated tread surface that helps reduce the amount of dirt that can be tracked into the trailer. This step has a weight capacity of 300 lbs and has folding legs for easy storage when it is not needed. We do not carry any permanently...
  view full answer...

Do you have a question about this RV Handrail?