Crank Handle for Stromberg Carlson Scissor Jacks and Tongue Jacks
(22 reviews)
Price: $16.34
In Stock
Crank Handle for Stromberg Carlson Scissor Jacks and Tongue Jacks
Item # JCH-1
Retail:$38.68
Our Price: $16.34
You Save: 58%
Orders above $99 qualify for Free Shipping
In Stock
- All Info
- Reviews (22)
- Q & A (0)
- Videos (2)
- Photos
- Why etrailer?
Stromberg Carlson Accessories and Parts - JCH-1
- Trailer Jack
- Camper Jacks
- Handles and Cranks
- Sidewind
- Stromberg Carlson
This crank handle will help you raise and lower your Stromberg Carlson scissor or tongue jack according to your needs.
Features:
- Works with Stromberg Carlson scissor jacks and tongue jacks
- Made in the USA
- 1-Year limited warranty
- Overall length: 28-1/4"
JCH-1 Stromberg Carlson Crank Handle for Scissor and Tongue Jacks
California residents: click here
Video of Crank Handle for Stromberg Carlson Scissor Jacks and Tongue Jacks
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Stromberg Carlson Trailer Jack JCH-1 Review
Today, we're going to taking a look at part number JCH-1. This is the crank handle for Stromberg Carlson Scissor Jacks and Tongue Jacks. It's going to help you raise and lower your jack as needed. It has a nice rubber handle right here. That way, you can get a nice, secure grip on it. It's going to allow for easier cranking. Here on this end is going to be a six point socket that will fit a nut or bolt head that measures three quarters of an inch or 19 millimeter.
The overall length of the handle, measuring from end to end, that's going to give us a measurement of 28 and 1/4 of an inch, from this point here to this point here. Now, here on this end of the handle, it has a plastic coating that goes around the actual metal surface. Again, that's going to allow you to get a nice, secure grip on it. It looks like it's heat shrink material so it's going to stick over there, it's going to rotate and it's not going to slide off. Again, that just allows you to get a nice, secure grip on it for easier cranking. I do have a jack here so I just want to show you how this unit operates. The socket portion would go over that area there.
Then, you can use the handle as a crank and it's just going to raise the jack. It's also going to assist you in lowering the jack as well. That's going to do it for today's review of part number JCH-1. This is the crank handle for Stromberg Carlson Scissor Jacks and Tongue Jacks. .
Customer Reviews
Crank Handle for Stromberg Carlson Scissor Jacks and Tongue Jacks - JCH-1
Average Customer Rating: 4.5 out of 5 stars (22 Customer Reviews)
This crank handle will help you raise and lower your Stromberg Carlson scissor or tongue jack according to your needs.
- JCH-1
Jeffrey L - 09/28/2016
by: Jeffrey L.09/28/2015
The quality of the 3/4 inch hex socket is sufficient and provides a snug fit onto the crank bolt of the Stromberg Carlson trailer jack. I'm also happy with craftsmanship of the weld used to affix the socket to the hand crank. The loose-fitting rubber sleeve that is provided with the hand crank is a little "cheezy" but I'm sure it will live up to its purpose.
Comments
After one year, my jacks are still performing as well as the day I installed them. They will not lift my trailer off the ground, but in conjunction with locking chocks and leveling blocks, my trailer is very stable. They do require periodic lubrication to keep them loose, quiet, and rust-free. Im very happy with them and would highly recommend them to other trailer owners.
Jeffrey L - 09/28/2016
- JCH-1
by: William08/06/2021
Takes too long to get to me. Not exactly heavy duty. Extremely light weight.
- JCH-1
by: DLR09/21/2017
I recently purchased 4 Stromberg Carlson Scissor Jacks and the handle to replace the ones on my 1986 Jayco J 24.5 camper. The holes match up with the ones in the frame and they are an easy install. The handle is adequate length and makes raising and lowering the jacks a snap. The price of the jacks and the handle were better than on other websites I browsed for these items and etrailer.com had free shipping for orders over $100.00. To top that off they bettered the delivery date to 3 days. I'll be looking at their site for more of my camping trailer parts.
- JCH-1
by: Coloradodonkey04/14/2021
Works decent as is, i replaced the mid-shaft handle rubber with PVC for easier cranking.
- JCH-1
by: Richard04/24/2020
The product is fine but I am seriously considering returning it. The product is made in china and I avoid buying products from this country. I am unhappy with etrailer because they did not acknowledge this within their product information.
- JCH-1
by: Dave G03/04/2016
Bought 2 to have a spare. These look very solid as compared to what came with my camper. I have not had a chance to use it yet but it is obvious these are heavy duty. Bought a swivel head crank handle last year from another store and it broke the first use. These definitely look like they will perform as expected. Shopping at etrailer is always a pleasure and their merchandise is trusted top quality.
- JCH-1
by: Kelli D11/17/2014
Very pleased with the product. Much better than the one that came with my camper. Much higher quality and very reasonably priced. Will definitely order from e trailer again. I didn't pay for express shipping and had the product within a couple of days.
- JCH-1
by: Robin10/27/2014
Lost our jack crank and etrailer had the best bang for our buck. Glad we found them.
- JCH-1
by: Charles05/02/2019
Worked perfectly.Delivered just in time for our upcoming camping trip.We appreciate the good help Angella provided and will definitely use Etrailer again.
- JCH-1
by: Joseph04/07/2020
Didn't realize there was one in the original carton of jacks
- JCH-1
by: Seth Everett05/07/2017
Turns jack as a good jack handle should. Solid product
- JCH-1
by: Bob T.08/11/2015
A nice solid product, that works perfectly . Just like etrailer
- JCH-1
by: RLB08/24/2011
Emails kept me aware of my order's progress, delivery was prompt, and the items were just as expected from the website. Overall completely satisfied, would order from them again.
- JCH-1
by: Jodi08/20/2016
Perfect!
- JCH-1
by: Trena Phillips06/11/2016
Fast delivery. Great product.
- JCH-1
by: Steve09/20/2015
Item quality seems very well made and durable, fast shipping, would definitely buy from again.
- JCH-1
by: Rosalie10/10/2016
I luv it and I got it really fast shipping was really good but I got the wrong size but I'm going to keep it maybe someone else in my family can use it I will be ordering the correct one as soon as I find out what size it is thanks guys yall doing a great job keep it up
- JCH-1
by: Criselia09/20/2018
Exactly what we needed. Good price and very handy. Highly recommend to make job easier.
- JCH-1
by: Steve06/07/2014
great ebayer fast shipping
- JCH-1
by: Danny03/22/2016
Looks and feels sturdy. Quick delivery. Nice job.
- JCH-1
by: Jim B03/03/2017
Received item quickly. Item was as adve rtised
- JCH-1
by: Dolores11/12/2021
22
22
Ask the Experts about this Stromberg Carlson Accessories and Parts
- How Is Socket Attached To Crank Handle for Stromberg Carlson Scissor JacksI have attached a photo of the socket end of the Crank Handle for Stromberg Carlson Scissor Jacks, part # JCH-1. As you can see in the photo, the 3/4 inch socket is welded on the end of the handle. The handle and socket are made of zinc-plated steel. There is no small screw in the end of the socket.
view full answer...
- Installation of the Trailer Scissor Stabilization Jack AngleScissor Jacks like the Leveling Scissor Jack - 24" Lift - 5,000 lbs # JSC-24-IND should be mounted at 90 degrees from the trailer frame rail. This allows you to have full crank handle movement of the Crank Handle for Stromberg Carlson Scissor Jacks and Tongue Jacks # JCH-1. The Ultra-Fab Speed Socket Power Drill Adapter for Scissor Jacks # UF48-979005 is and alternative option.
view full answer... - Recommended Leveling Jacks For Winnebago ViewThe Stabilizer Jack you came from, part # TJ01RT can be permanently mounted typically under the corners of your camper. Each jack has a 650-lb capacity and are sold individually, and are designed for a smaller RV than your View. The stabilizer jacks I recommend for your Winnebago View are the Stromberg Carlson Leveling Scissor Jacks, part # JSC-24-IND. These jacks mount on the corners of your camper and adjust from 4 inches to 24 inches as needed. Each jack has a capacity of 5,000-lbs....
view full answer... - Does Mounting Hardware Come With Leveling Scissor JackMounting hardware does not come with the Leveling Scissor Jack - 24" Lift - 5,000 lbs # JSC-24-IND, which can be either welded or bolted on. To bolt it on we recommend grade 5 bolts, with washers and locking nuts, which can be sourced at your local hardware store. Please keep in mind you will also need the Crank Handle # JCH-1 with this jack. I have added links to video reviews for you to check out as well.
view full answer... - Scissor Jack Recommendation for Changing Spare Tire on Utility TrailerWhat you could use for a jack for changing a spare on your utility trailer is the Scissor Jack part # JSC-30-IND. This is rated to lift up to 5,000 lbs and would work well for you. You will also need the crank handle part # JCH-1.
view full answer... - How To Manually Operate Jammed Electric Trailer Tongue JackIt is likely that the interior gears have stripped when the jack over-extended. If you have the manual crank that should have came with the jack, use it by removing the rubber plug at the top of the jack, insert the crank and fit it to the override nut. Turn handle counter-clockwise to lower the trailer. If you no longer have the crank, we sell a replacement as part # JCH-1. If manually cranking the jack is unsuccessful, you will probably need to replace the jack, as the jack manufacturers...
view full answer... - Replacement Fuse for the Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500Yes, the Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500 does have a 30A fuse as you can see from the attached parts picture. If you need to replace this fuse then you can use part # UF17-101066 on our site. Another possibility is that the power wire to your battery is damaged or the battery itself is drained. Both of those options would be worth looking into as well. To raise the tongue of your trailer (lower the jack leg) you need to turn the handle clockwise. If you are...
view full answer... - Can Scissor Jacks Be Used to Level a 24 Foot Heavy Duty Car Hauler TrailerScissor jacks # UF48-979002 are meant to support weight but not lift it like you said so these jacks would not be the best option for your trailer. Scissor jack # JSC-30-IND is listed as having the ability to raise, lower, and stabilize so you could use it with handle # JCH-1. Or use drill attachment # UF48-979005 to speed up the process.
view full answer... - Are Replacement Parts For Scissor Jack AvailableI spoke with my contact at Stromberg Carlson about replacement parts for the scissor jacks we offer like part # JSC-24-IND, and they told me they do not offer any replacement parts. I recommend replacing your current jack with the # JSC-24-IND. This is a 5,000 lb leveling jack that has measures 4 inches when retracted and 24 inches when extended. The required crank handle can be ordered separately and that part number is # JCH-1. If you choose to use a power drill to raise and lower...
view full answer... - Nut Size Used to Raise and Lower the Stromberg Carlson Scissor Trailer Jack # JSC-24-INDThe nut for raising and lowering the Leveling Scissor Jack - 24 inch Lift - 5,000 lbs, item # JSC-24-IND, from Stromberg Carlson is 3/4 inch. A 19 mm wrench or socket can also be used. We carry a jack handle, item # JCH-1, with the proper size socket for use with these jacks.
view full answer... - Recommended Scissor Jacks To Stabilize Winnebago View Sprinter To stabilize your Winnebago View Sprinter frame I recommend using scissor jacks like part # JSC-24-IND on the rear corners of your Sprinter. I recommend using 2 jacks. This jack can be bolted or welded when installing. Welding should be done by a certified professional. I recommend these over the # TJ01RT you came from because they have a much higher support capacity. The # TJ01RT has a support capacity of 1000 lbs versus the # JSC-24-IND that has a capacity of 5000 lbs. The # JSC-24-IND...
view full answer... - Weight Capacity And Dimension For Stromberg Carlson Scissor Jack The scissor jacks we offer have weight capacity much higher than the 387 lb you stated you need. All of the jacks we offer are designed for RV use and are intended to be mounted with the top plate. The largest top plate we offer is on the Stromberg Carlson Jack, part # JSC-30-IND. This has a round plate that measures 9 inches diameter. Most jacks have a much higher lift range than the 7.874 inches you stated you need. The # JSC-30-IND has a lift capacity of 5,000 lbs, and does require...
view full answer... - Need Scissor Jack with Mounting Holes on Top and Bottom to Raise and Lower a FrameI recommend going with the Leveling Scissor Jack, # JSC-24-IND. This leveling scissor jack has a 5,000 pound capacity, adjusts from 4" to 24" inches, and has mounting holes on the top and bottom plates. Since this jack adjusts from 4 inches and you mentioned that you need a jack that retracts to less than 4 inches, I recommend that you take a quick measurement to make sure that you won't have any clearance issues. The Crank Handle for Scissor Jacks, # JCH-1, is sold separately.
view full answer... - Spacing of Mounting Bracket Bolts on Stromberg Carlson Trailer Leveling Scissor Jack # JSC-24-INDI am very pleased to report that based on pulling one of these jacks from stock and measuring the center-to-center spacing of the bolts that hold the jack to the mounting bracket, that the spacing is indeed 2-inches exactly as you has hoped. This Stromberg Carlson Trailer Leveling Scissor Jack # JSC-24-IND offers a 5000-lb capacity, 20-inch lift range and carries a one-year limited warranty. Please note that the required crank handle is sold separately, part # JCH-1.
view full answer... - Replacement Crank Handle Recommendation for a Stromberg Carson Jack part # JET-3500For a replacement crank handle for your Stromberg Carson Jack part # JET-3555 you would want the part # JCH-1.
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality accessories and parts for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Video Edited:
Dustin K
Installed by:
Hayden R
Updated by:
Hannah L
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-1624
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.