Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Wireless camera plugs into your factory pre-wired Voyager WiSight plate for real-time, crisp video while backing into the campsite. Built-in microphone and speakers help you communicate with a friend outside your RV as you back into a tight space.
Features:
Specs:
Note: Not compatible with first generation WiSight technology products.
After a long drive to the campground, the last thing you feel like doing is maneuvering your RV into a tight campsite space - especially in the dark! This wireless backup camera system plugs into your RV's pre-wired Voyager WiSight technology plate to give you peace of mind that you'll be able to back up more safely, even at nighttime or in other low-light conditions.
The WiSight 2.0 technology digitally locks the camera and monitor together, transmitting strong, interference-free signals up to 60'. This means that you'll have sharp, real-time video footage whether you're on the road or at the campsite, and you are less likely to have interference from smartphones, routers, and other devices.
Tired of yelling back and forth to your partner out the window as you're struggling to back in at a good angle? The built-in microphone on the camera and integrated speakers on the monitor allow a spotter to relay information or instructions to you from outside your vehicle. This makes it much easier and safer for you to back up in a crowded campground.
No more wondering if you're getting too close to another vehicle, tree, curb, or your kid's bike while backing up. The rear assist marker lines take out the guesswork to avoid collisions and safely maneuver your RV. The lines are displayed in 3 different colors (green, yellow, and red) to help gauge the proximity of objects within your view.
And because this camera has 14 infrared LEDs, you'll have a clear picture even in low-light conditions at dusk or in complete darkness at night. These LEDs provide ample illumination up to 30' should you arrive at the campsite after dark and need to back up into your parking spot.
If there's a torrential downpour, or if you just simply need to wash your RV, the waterproof, IP69-rated camera will be protected against close-range, high-pressure spray downs. And if you're driving through rough country roads, the camera will resist dust and dirt from building up or getting inside.
This camera system includes a suction cup mount that you can use to stick the monitor onto your dashboard or windshield. To power the monitor, simply plug it into a 12-volt light or cigarette lighter outlet.
This wireless camera is designed for RVs that have a factory-installed, Voyager WiSight pre-wired plate, which makes installation incredibly easy. All you'll need to do is plug the camera directly into the socket on the pre-wired plate - drilling isn't required. Then bolt it down with your OEM screws.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
Ratings & Reviews
Pricey option for the RV but mine was prewired for this equipment. It works well and is super easy to operate. The only complaint that I can list is the 12v accessory port power cable for the LCD. There should be an option to use USB power instead.
Install was super easy (my camper had a wired plug in place when I bought it). Connecting the screen to the camera was simple. The camera worked flawlessly after my install and initial connection for a year on the road. The only issue I had was keeping the suction strong enough on the windshield to hold the screen in place.
This camera sucks! The instructions that came with the product didn't even match how to actually install the product. I watched youtube videos, but those didn't fit how to connect the camera in the vehicle. Then I had to call Voyager and talk to them about how to install it. It is the most stupid install and very cumbersome. The camera installs in the vehicle like it was built in the 1990s. It's awful, but I'm stuck with it because 2023 Winnebago pre-wired its travel trailers to work with this brand. Avoid buying this camera, unless you absolutely have to.
I don't have any prior experience with RV cameras so take that for what it is worth. The product seems to do what I expected and it was very easy to install. kind of expensive, but probably no more than the damage I may avoid by being able to see what is behind the camper while backing. Packaging and shipping were top notch and I only have positive thoughts on the transaction at this point.
I watched your videos. Pretty straightforward. I have never had an installation go so easily! great job etrailer !!!!!
I ordered the Voyager WISight 2.0 , the process was simple and it arrived on time. I installed the camera and monitor, very easy installation. After trying to pair the camera to the monitor a couple times, I felt I was doing something wrong so I called the tech support @voyager and Got an actual person that answered the phone (that’s a huge plus). I explain to her what I did and then she went through the pairing process with me and I realized what I was doing wrong. I went back to my truck and went through the process exactly the way she explained it and * Bam * it work. I would absolutely recommend etrailer. com and the voyager back up rv camera. Great service
It was a snap installing this camera. Easy to navigate and understand through the screen. My travel trailer came with the pre-install plug. That made it extremely easy. To install. I am still trying to navigate to where I want to put the monitor. But all in all, it's a great tool to have in assisting in backing up.
I had a good bit of difficulty in getting the camera and monitor to 'sync'. I worked on it for some time then had a professional trailer rep work on it for an hour, checking all sorts of connections, fuses, etc to no avail. I returned home with the camper and unit and called a Voyager rep. I went back out for the third or fourth time and it finally came on live-'synced'.
I'm not a tec person at all followed simple to understand instructions it worked and paired the first time we are going to love it Thanks sincerely Jim
WHAT, a Great customer experience with the team of Etrailer. Will order more very soon. Thank you, Ashley, Gerorge, & William. The experience did not seem like cold order from the on line major stores. It was like a mom & pop caring about what I bought. Because, they owned it as their own!… Also, on the spot communication. Keep the care to the customers. LOVE Etrailer!!!
I had a little trouble installing but it was not the camera's fault. The pre-wired connection on the RV was done incorrectly. Once i got that figured out everything worked perfectly!
Great product and easy install
Easy to install and set up. Customer service has been exceptional.
The camera and monitor worked good on a 600 mile round trip journey. Took a few minutes to get used to looking generally down on a trailer in tow but that did t take long and was able to back it into place. Setup was easy and it paired fast. Etrailer services is always over the top and their prices are lowest.
Super easy camper was prepped plug and play
Package arrived sooner than expected so that made me happy! System was easy to install and works great!
Our Micro Minnie Travel Trailer was prewired for this system, so installation was a breeze. I had read the previous reviews, so I was very aware of the need to follow the pairing instructions precisely in the sequence described in the instructions. That made the pairing successful on the first attempt. Other than the installation and initial test, we have not had occasion to use the system yet, but the image on the monitor is clear and crisp with a lot of adjustment options for the display. My reason for the system is to monitor anything that I put in the hitch on the back of the trailer (bicycles, etc.) and to provide assistance backing the trailer into campsites. These two uses are as yet untested, but I think the camera will be very helpful.
The original setup took a minute. Since then, it connects as soon as I plug the monitor in. Works fine.
Easy to install, easy to sync…was up and going in 20 minutes
Did not fit properly. Top of camera hit the bottom of awning. I had to make modifications to fit.
my trailer RV was prewired for this product, installation and pairing with the display could not be easier.
As always, etrailer people are doing a fantastic job!!
This camera works well, it's super easy to use and set up. Luckily my trailer was already pre-wired for it so the install was extremely easy, just plug and play pretty much. Video is great and love that I can hear my wife over the camera when I am backing up.
Quality build. I can understand why some people are confused with the instructions for pairing. Vehicle needs to be connected to the camper trailer with running lights or headlights turned on to pair correctly. If you get a "No Signal" later on after an initial successful pairing, flip your headlights on and it will connect. Display is not high resolution at all but good enough for backing up. I'm happy with the purchase, works very well once you figure it out. Perfect fit for our Winnebago Micro Minnie.
It was delivered on time. installed as easy as the web site said. I took dealer installed plate off travel trailer plugged it into pre wired socket and used the 4 screws from plate to mount camera. great picture I can see 3 lanes wide behind trailer.
Ronald
11/17/2025
camera works great Last summer it help me back into 33 campsite on our 4 month trip. great to have in parking lot also.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Katrina B.
12/1/2022
There is a certain order of process that must be followed for the camera to pair to the monitor. ALL power must be removed from the camera usually camera is wired in to the lights of the tow vehicle turn lights off then the monitor will be put into pairing mode. While the monitor is counting down, then power must be applied to the camera lights turned on, and camera should sync and pair with the monitor.