Product Experts Available Now!
Call 1-800-940-8924
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
(15 reviews)
Price: $94.01
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
Part Number: AH15450ECOMP
In Stock
$94.01
Retail:$98.98
You Save: 5%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (15)
- Q & A (0)
- Photos
TruRyde Trailer Hubs and Drums - AH15450ECOMP
Highlights
- Built for 3,000-lb Axles: For agricultural idler setups using spindle #AS1500E.
- Includes All Core Parts: Comes with LM67048 inner and LM11949 outer bearings, races, seal, grease cap, and 1/2"-20 wheel bolts.
- 4 on 5" Bolt Pattern: Matches wheels designed for 4-lug, 5" circle layouts.
- Ready for Low-Speed Ag Use: Designed for farm equipment or off-road applications up to 20 mph.
- 1,500-lb Hub Capacity: Supports heavy loads while maintaining reliable rotation on each wheel.
Features to know about
Get Moving Again Fast: Complete Hub Assembly for 3,000-lb Axles
When a hub goes out, you don’t want to waste time chasing down parts. This TruRyde Trailer Hub Assembly comes complete with everything you need to make the swap—inner bearing (LM67048), outer bearing (LM11949), both races installed, grease seal, grease cap, and four 1/2"-20 wheel bolts. It’s built for 3,000-lb agricultural axles and has a 1,500-lb weight capacity per hub, so once it’s installed, you’re back to steady rolling without a long parts list.
Keep It Simple in the Shop: Pre-Installed Races and Matching Bearings
Getting races set perfectly can be one of the trickiest parts of a hub job. This hub saves that hassle because both the LM67010 (inner) and LM11910 (outer) races come factory-installed. The bearings drop right in—no hammering or special tools needed. The precision fit of the LM67048 (1.250" ID) and LM11949 (0.750" ID) bearings keeps things smooth and tight on the spindle.
Fit for the Odd Combo: Works with .75" and 1.25" Bearing Diameters
If your spindle takes a .75" outer and 1.25" inner bearing, you know how rare that setup can be. This hub is designed exactly for that combination. The included grease seal—1.50" inner diameter by 2.332" outer diameter—matches those spindle dimensions perfectly. It’s a solid fit that keeps older or less common axles in service without having to rebuild or replace them.
Built Tough for Field Duty: Agricultural Design with 4 on 5" Bolt Pattern
This idler hub is made for agricultural use where reliability and ease of service matter most. The 4 on 5" bolt pattern and 6-1/2" hub diameter give it strong support under load while staying compact enough for smaller implements or trailers. With a pilot hole diameter of 3.62", it mounts securely and stays centered for consistent performance in low-speed, off-road use up to 20 mph.
Ready When You Are: Simple Specs, Straightforward Fitment
The TruRyde AH15450ECOMP pairs with spindle #AS1500E for a clean fit on 3,000-lb axles. Every spec is dialed in for dependable service—1,500-lb capacity per hub, 4" overall depth, and all matching bearing and seal components already included. It’s a straightforward solution when you want a proper mechanical fit without guesswork or modification.
Specs
Weight and Capacity
- Application: 3,000-lb trailer axles with agricultural applications
- Weight capacity: 1,500 lbs
Dimensions
- Hub diameter: 6-1/2"
- Pilot hole diameter: 3.62"
Bolt Pattern
- Bolt pattern: 4 on 5"
Compatibility
- Use with spindle #: AS1500E
Bearing, Race, and Seal Information
- Bearings (included):
- Inner bearing: LM67048 (1.250" inner diameter)
- Outer bearing: LM11949 (0.750" inner diameter)
- Races (included):
- Inner race: LM67010
- Outer race: LM11910
- Grease seal (included):
- Inner diameter: 1.50"
- Outer diameter: 2.332"
Determining Bolt Pattern
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
AG-H6334500-1ZHA Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
Replaces AH15450ECOMP
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
- etrailer mistake
- Product did not meet expectations
- Wrong item was ordered
Ratings & Reviews
4.5
15 reviews
by:
Rocco
08/15/2026
very happy with items, deilvered on time as scheduled, i will definetly purchase from Etrailer.com again.
by:
Craig
07/30/2026
Great service
by:
Mason
03/05/2026
Need better product description. All dimensions.
by:
Adam
01/24/2026
Great people more than willing to help with any of your needs! They also take time to tell you a little about themselves so you know who you’re dealing with! Speedy service and delivery! Over all great experiences!!
by:
Bill
09/20/2026
Time to receive my order was extreme and after waiting a long time the part didn’t fit . All dimensions were correct except the length of the spindle.
by:
Van R.
10/11/2016
Review the Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural - AH15450ECOMP and axel stub worked as advertised and could not expect more. would purchase again.
by:
Kenneth
03/24/2020
Product came as promised. etrailer was very helpful on phone when I call them. Very satisfied with shipment. Came a day earlier than I expected. Thanks Steve for your service
by:
Jessica
10/20/2019
We are very satisfied with the parts we ordered. They arrived in a timely manner. You were the only ones we could find who carried this. Mahalo for that! Very satisfied customers!
Jessica
10/20/2020
Your product is still working beautifully! We are still very satisfied.
by:
Carson
02/17/2015
Fast shipping and product was just as described
by:
Darby
05/15/2020
Great place to get trailer parts from.
by:
Dan B
10/20/2012
my plow days no delay at all!!!
by:
Dennis
04/16/2020
Just what I needed
by:
Andrea
03/05/2024
by:
Matthew
08/26/2025
by:
Greg
09/13/2024
15
15
true
See what our Experts say about this TruRyde Trailer Hubs and Drums
- Hub Recommendation for Spindle with Diameters of .75 and 1.25 inchesFrom the measurements you gave me, it sounds like you have an Agricultural Spindle like # TRU54FR that uses # LM67048 Inner bearing and # LM11949 Outer bearing. For a hub assembly with a 4 on 5 bolt pattern # AH15450ECOMP will work and the bearings, seal and cap are included. I linked the parts along with a few review videos for you to reference.
view full answer... - Replacement Grease Seal For a Trailer Hub Using LM11949 Outer Bearing and LM67048 Inner BearingIf you can send me the diameter of the spindle where the grease seal sits and the diameter of the hub where the seal is pressed onto I can verify if we have the correct seal. Currently I do see we carry 2 hubs which use the Inner Bearing # LM67048 and Outer Bearing # LM11949. First is the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles # DX22XR which uses the Seal # 168233. This seal has an inner diameter of 1.688" and outer diameter of 2.332". The other hub is an Agricultural Hub...
view full answer... - Replacement Hub for a 3/4 Inch Diameter Straight SpindleThe only hub we have that is associated with a 3/4 inch spindle is # AH15450ECOMP. This is an agricultural hub that takes inner bearing # LM67048 and outer bearing # LM11949. But the spindle it fits on is not straight, it is tapered, # TRU54FR. If this is a kit trailer then in order to replace the hubs, wheels, and tires you are going to have to replace the axle. I have included a link to the right to the straight axles and the axle-less systems that we have. The axle-less systems may...
view full answer... - Replacement Trailer Hub for Flat Bed Trailer with 1.25 Inner and 0.75 Outer BearingsIt sounds like your trailer uses agricultural hubs # AH15450ECOMP. This hub has the same 1.25 and 0.75 inner and outer bearings which are parts # LM67048 and # LM11949. Make sure your seals have an outer diameter of 2.332 inches and inner diameter of 1.50 inches. If this matches then part # AH15450ECOMP is the hub you need.
view full answer... - Replacing Hubs and Wheels on 1964 Alpine Sprite Camper TrailerOlder classic trailers like your '64 Alpine Sprite may need new hubs in order to use the wheels and tires you wish for that vintage look. The only 4-bolt trailer hub/wheel bolt pattern we offer is the 4-on-4-inch format, like hub # AKIHUB-440-2-1K and wheel/tire # AM3S120. We do offer one agricultural hub in a 4-on-5-inch format, part # AH15450ECOMP, but this is for 3000-lb axles, much more than your trailer weighs. To use new hubs with the easy-to-find 5-on-4-1/2-inch bolt pattern you...
view full answer...
- Recommended Replacement Hub for an Agricultural Spindle W/ a .75 DiameterHey George, for your agricultural trailer it looks like the closest we have is the Trailer Hub Assembly # AH15450ECOMP. This hub has a 4 on 5 bolt pattern, a 1,500 lb weight capacity, includes a grease seal, grease cap, 4 wheel bolts, bearings and races, and will work with spindles that use a .75 outer and 1.25" inner bearing.
view full answer... - How to Measure for a Replacement Hub Hey Jeff! You can email that picture to me directly if you would like. However, in order to find a replacement I would need to know what size bearings it uses and your lug pattern. There should be part numbers stamped into the sides of the bearings. If you can't read the numbers on them, then you can measure the spindle at points C and D to get the inner diameter so that we can verify the correct fit. You'll need to use a digital caliper like item # PTW80157 to get the most accurate measurement...
view full answer...
- Trailer Hub with LM67048 and LM11949 BearingsHey there! The Dexter Trailer Idler Hub Assembly # DX22XR is the only hub we carry with a 5 on 4-1/2" bolt pattern that uses an LM67048 inner bearing and LM11949 outer bearing. If the # DX22XR is not wide enough for your spindle, unfortunately we do not have a longer hub with that same bearing combination and 5 on 4-1/2" pattern. We do also carry the Agricultural Trailer Hub Assembly # AH15450ECOMP, which uses the same LM67048 inner and LM11949 outer bearings. The catch is that this is...
view full answer... - Hub and Drum Assembly for 1 1/4 inch by 3/4 inch Axle 1 1/4" by 3/4" axles use item # LM11949 as an inner bearing and item # LM67048 outer bearing. I recommend the Redline Trailer Hub Assembly item # AH15450ECOMP. These hubs are for agricultural applications and are rated for 3,000 lbs axles and have a 4 on 5 bolt pattern. This kit is sold individually so you will need to purchase two.
view full answer... - Is There a Trailer Hub Assembly with 3/4" and 1-1/4" BearingsThe only trailer hub assembly we offer with a .750" (part # LM11949) inner bearing and a 1.250" (part # LM67048) outer bearing is the Trailer Hub Assembly part # AH15450ECOMP which uses a 4 on 5" bolt pattern. This is a very odd bearing combo used only on agricultural trailers so they don't make many bolts patterns available, in fact it's only one.
view full answer... - Replacement Boat Trailer Idler Hub with 4-1/4" Depth and 1-1/16" SpindleHey Larry, The Trailer Hub Assembly # AH15450ECOMP you're looking at is for a tapered spindle and won't fit your boat trailer, but I have the Trailer Idler Hub Assembly # AKIHUB-440-2-G-2K that looks to fit your specs a bit better. This hub is rated for 2,000 lbs and has a 4 on 4" bolt pattern so as long as that matches what you have then you'll be good to go!
view full answer... - Replacement for Hub With LM67048 and LM11949 BearingsWe have one hub that matches your bearing combination. The # AH15450ECOMP uses a # LM67048 inner and # LM11949 outer bearing. This hub is intended for 3,000-lb trailer axles with agricultural applications. The bolt pattern is also 4 on 5 so you will need to double check to see if that matches your current hub. If it is a 4 on 4 we don't have anything that matches.
view full answer... - Determining Capacity of an Old Trailer Axle with No Information on the AxleThe 15123 bearing is still common but I could not find any information on the 09057 bearing. But given that your hubs have the 4 bolt pattern it is likely that the axle is rated under 3,000 pounds. Most likely it is a 2,000 pound axle. Measure the spindle where the 09057 bearing rides using calipers such as # PTW80157 I can see if there is a different bearing with the same inner diameter that is commonly used with 15123 and go from there. Since you still have the trailer frame as well...
view full answer... - Dimensions of AH15450ECOMP Agricultural Trailer Hub AssemblyThe hub face of the # AH15450ECOMP Agricultural Hub is 6-1/4 inches in diameter, and the overall depth is 4 inches. The hub has an inner hub bore diameter of 2.328 inches with an outer bore diameter of 1.781 inches. I've shown these dimensions in the provided photo. The hub has a 1500 lb each/3000 lb per axle, and is designed for low speed applications. The bolt pattern is 4 on 5 (4 lugs on 5 inches, center to center). The hub includes the inner and outer bearings and races, the grease...
view full answer...
- Can I use a different seal than what comes with DX22XRThat's a great question, Steven! Yes, you can totally swap hub # AH15450ECOMP for hub # DX22XR. To make it work, just be sure to use seal # SL150, it has a 1.5" inner diameter and a 2.331" outer diameter, which will fit perfectly with the Dexter hub. Just a quick note: when swapping hubs, it’s best to replace all of them with the same model to keep things consistent. Out of curiosity, what kind of trailer are you working on?
view full answer... - What are the Overall Dimensions of the Dexter Agricultural Hub Assembly # AH15450ECOMPI pulled the Dexter Hub Assembly, # AH15450ECOMP, from the warehouse and made a simple diagram showing the outer dimensions for you to check out, see photo. This hub comes with the bearings, seal, grease cap and lug bolts. This hub fits spindle # TRU54FR. If you are not sure what spindle you have or if this hub will fit on your spindle, then you can compare the part numbers of your current bearings to those with this hub assembly or you can take a few measurements of your spindle. The...
view full answer...
- Trailer Hub that Uses Inner Bearing LM67048 and Outer Bearing LM11949Sounds like you may have an older setup. If so you may need breaks and drums. All of the drums we carry for 3500 lbs axles are going to be 2 " deep. To get the correct drum we will need the bearing numbers and the spindle dimensions or we cannot guarantee that the drum assembly will fit. If you can provide that information we will be glad to make a recommendation.
view full answer... - Do You Have a Trailer Hub with Inner Bearing L44649, and Outer Bearing LM11949?Hello Jon, I am sorry, but I do not see any hubs with that bearing combination, and that is on any bolt pattern. How old is the trailer that you are working on? You may need a different axle at this point. That seems to be the case when I cannot find a hub on our site. If you would like to let me know your axle capacity, hub face to hub face, and spring center to spring center measurements I am happy to see if we have a new axle that will work for you. I attached a help article on...
view full answer... - Replacement Hubs For Trailer With 3/4 Inch Outer Diameter Spindle That Is StraightThe only hub we have that is currently available for a 3/4 inch spindle is Item # AH15450ECOMP. This is an agricultural hub that fits 3,000 lbs axles for 4 on 5 inch bolt pattern. It takes an inner bearing, Item # LM67048, and outer bearing, Item # LM11949. It is meant to be used for low speed (less than 20 mph) agricultural applications. It is designed for a spindle like Item # TRU54FR. If you can find the actual bearing number on your old bearings and seal or can send me a bearing...
view full answer...
- Replacement Trailer Hubs For Spindle That Uses 1-1/4" Inner Bearing and 3/4" Outer BearingThe Agricultural Trailer Hub Assembly # AH15450ECOMP is what you are looking for. It uses a Inner Bearing # LM67048 which has an inner diameter of 1.250" and an Outer Bearing # LM11949 with an inner diameter of .750". You can verify that the Grease Seal # SL150 with the inner diameter of 1.500" matches your spindle. I did notice that there is a lot of scratches on your spindle. If these are deep grooves that your fingernail will catch on you should replace your Spindles # TRU54FR so that...
view full answer...
- Hub Recommendation for Trailer Spindle that Measures 1.25 and .75 inchesIt sounds like you are in need of an agricultural hub like the part # AH15450ECOMP that has a diameter of .75 where the inner bearing rides and 1.25 inches where the outer bearing rides. This hub has a 4 on 4 inch bolt pattern so if you needed one with a 5 on 4-1/2 inch bolt pattern you would want the part # DX22XR.
view full answer... - Replacement 5 on 4 3/4 Hub With LM67048 Inner Bearing and LM11949 Outer BearingWith your hub having an inner bearing # LM67048 and outer bearing # LM11949, it sounds like you have an agricultural style hub, like the Redline Trailer Hub Assembly # AH15450ECOMP. However, this will have a 4 on 5 bolt pattern and this will be the only bolt pattern this hub is offered in, unfortunately. With that being said, the best option we can recommend will be to replace your axle with something that uses more common parts. Though you will need to measure a few things, picture included,...
view full answer...
- Trailer Hub That Fits a Spindle With 1-1/4" Inner Bearing and 3/4" Outer BearingThe only hub that we have that fits an Inner Bearing # LM67048 (1-1/4") and Outer Bearing # LM11949 (3/4") is the Trailer Hub Assembly # AH15450ECOMP. This is only available in a 4 on 5" lug bolt pattern. To get to the 5 on 4-1/2" wheel pattern you will need to source a wheel spacer that adapts from the 4 on 5" bolt pattern.
view full answer... - Recommended Replacement For A Shoreland'r Trailer Hub Assembly SS733Hey Jeremy, The Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 # DX22XR should be the a match for the Shoreland'r trailer hub assembly SS733. The only thing I could not confirm as a match was the grease seal so I would just doublecheck the diameter of the spindle at point B from the diagram below to confirm fitment. The DX22XR uses a grease seal with a 1.688" Inner diameter.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Installed by:
Jeff D
Updated by:
Laura H
Updated by:
Wilson B
Written by:
Michael B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Robin H.
9/22/2026
I'm sorry to hear that. Someone from our customer service team will be reaching out to you shortly.