Replacement for Hub With LM67048 and LM11949 Bearings
Updated 04/07/2024 | Published 04/05/2024 >
Products Featured in This Question
Question:
Hello, I have a small, non highway trailer that needs new 4 bolt hubs for 13 wheels. It has tapered spindles which appears to be 1-1/4 by 3/4 based on ID measurements of the bearings. The numbers on the bearings are LM67048 and LM11949 respectively. Do you carry replacement hubs that will work with these spindles? Thank you
asked by: Neil O
Expert Reply:
We have one hub that matches your bearing combination. The # AH15450ECOMP uses a # LM67048 inner and # LM11949 outer bearing. This hub is intended for 3,000-lb trailer axles with agricultural applications. The bolt pattern is also 4 on 5 so you will need to double check to see if that matches your current hub. If it is a 4 on 4 we don't have anything that matches.
Product Page this Question was Asked From
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Trailer Hubs and Drums
- Idler Hub
- Agricultural
- LM67048 / LM11949
- Standard Grade
- For 3000 lbs Axles
- 1/2 Inch Stud
- 4 on 5 Inch
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Grease Seal For a Trailer Hub Using LM11949 Outer Bearing and LM67048 Inner Bearing
- Q&A: Is There a Trailer Hub Assembly with 3/4" and 1-1/4" Bearings
- Q&A: Trailer Hub that has Bearing Numbers LM67048 and L68149
- Q&A: Recommended Replacement For A Shoreland'r Trailer Hub Assembly SS733
- Q&A: Replacement Hub for a 3/4 Inch Diameter Straight Spindle
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Q&A: Hub For Outer Bearing LM11949 & Inner Bearing LM67048
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern



Neil
4/7/2024
Thanks Robin. It seems I have the 4 on 4 pattern so I will need to decide how much further I want to invest in this trailer.