Recommended Replacement Hub for an Agricultural Spindle W/ a .75 Diameter
Updated 08/06/2024 | Published 08/03/2024
Question:
I have a log splitter that has a straight .75 spindle and I need a 4 bolt hub assembly for it. Can you help me?
asked by: George J
0
Expert Reply:
Hey George, for your agricultural trailer it looks like the closest we have is the Trailer Hub Assembly # AH15450ECOMP. This hub has a 4 on 5 bolt pattern, a 1,500 lb weight capacity, includes a grease seal, grease cap, 4 wheel bolts, bearings and races, and will work with spindles that use a .75 outer and 1.25" inner bearing.
expert reply by:
Bryce D
0
Product Page this Question was Asked From
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Trailer Hubs and Drums
- Idler Hub
- Agricultural
- LM67048 / LM11949
- Standard Grade
- For 3000 lbs Axles
- 1/2 Inch Stud
- 4 on 5 Inch
- TruRyde
more information >
Continue Researching
- Q&A: Replacement Grease Seal For a Trailer Hub Using LM11949 Outer Bearing and LM67048 Inner Bearing
- Q&A: Is There a Trailer Hub Assembly with 3/4" and 1-1/4" Bearings
- Q&A: Trailer Hub that has Bearing Numbers LM67048 and L68149
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Q&A: Hub and Drum Assembly for 1 1/4 inch by 3/4 inch Axle
- Q&A: Hub For Outer Bearing LM11949 & Inner Bearing LM67048
- Q&A: Recommended Replacement For A Shoreland'r Trailer Hub Assembly SS733
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
George J.
8/6/2024
Is see that part is $81. Is that for two?