Trailer Hub that Uses Inner Bearing LM67048 and Outer Bearing LM11949
Updated 07/24/2015 | Published 07/23/2015
Products Featured in This Question
Question:
The hub i have now is a 5 lug with no numbers on the hub, the bearing numbers are LM67048 for inner bearing, LM11949 outer bearing, could you help me with what hub would be the best fit? I believe the hub thats on it is agriculture hub, i would like hub i can use for everyday use, not agricultural. Thank you
asked by: Alex
Expert Reply:
Sounds like you may have an older setup. If so you may need breaks and drums. All of the drums we carry for 3500 lbs axles are going to be 2 " deep. To get the correct drum we will need the bearing numbers and the spindle dimensions or we cannot guarantee that the drum assembly will fit.
If you can provide that information we will be glad to make a recommendation.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Trailer Hub That Uses Bearings LM11949 and LM67048
- Q&A: Trailer Hub Recommendation with 4 on 4 inch Bolt Pattern and Bearings L44643
- Q&A: Replacement Galvanized Hub For a Dexter 8-259 with a 1" Straight Spindle
- Q&A: How Long Is The Malone LowBed MicroSport Trailer With The Retractable Tongue Kit
- Q&A: Can I Run the Blue Ox Patriot Braking System On It's Own 6 Volt or 12 Volt Battery?
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What's the RV Designer Motorhome Entrance Door Lock w/ Deadbolt RD68SR Made of?
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Lighting Requirements
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Measure a Trailer Axle
- Article: Trailer Wiring Diagrams
Chris O.
7/24/2015
The only hub we have that takes inner bearing LM67048 and outer bearing LM11949 is agricultural hub # AH15450ECOMP. This hub has a 4 on 5 bolt pattern. If you used it you would have to change the wheels to match but 4 on 5 wheels are rare and we do not carry them. Please note that agricultural hubs are rated for a maximum of 20 miles per hour.