Video Transcript for Review of Dexter Trailer Bearings Races Seals Caps - Bearing Kit 3500LB Axle - DX76ER

Hi, everybody, Andy here with etrailer.com. Let's take a real quick look at this Dexter Bearing Kit. Now, this kit is going to work with your 1 1/16 inch to 1 3/8 inch tapered spindles for your 3,500-pound axle. So this complete bearing kit is going to include the bearings, the races, the seal, the tank washer, and the cotter pin for streamlined hub maintenance. And you are going to get everything that you see here. This contaminant-resistant seal features a double lip design that's gonna help retain grease and block out dirt, water, and road debris.

So let me go over the bearings and the races here real quick. So the outer bearing number is L44649. You might be able to see that there etched there around the ring. So L44649 on the outer bearing. The inner bearing is L68149.

It's kind of hard for me to see there. Gotta get new contacts, it looks like. So inner bearing, L68149. And then the outer race is going to be.. Let me see if I can see that here.

L44610. L44610. And of course, that outer bearing slides right into that outer race. And then for the inner race. it's going to be L68111.

L68111. And of course that inner bearing will go right into that inner race. Cotter pin, tank washer. The seal ID is 1.72 inch. 1.72 inches, rather. So this is gonna be optimized for trailer use. Obviously, it's gonna be ideal for utility, marine, and recreational trailer hub assemblies. But if you do have any other questions, don't hesitate to reach back out. We do wanna make sure that you're getting exactly what you want and need. Well, that's gonna wrap up our quick look today. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.