Does Dexter Bearing Kit part # DX76ER Fit 3,500 lb Axle

Question

Question:

Part Number: DX76ER Does this kit work on a Dexter 3500 DB-42 signal axle. Thanks

asked by: Rick M

0

Expert Reply:

Hey Rick, yes the Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle # DX76ER that you referenced is the correct bearing kit for what you have since your axle is a Dexter 3,500 lb axle which is what this is designed to fit. Are you wanting to keep a spare on hand or did you have a bearing failure?

expert reply by: Jameson C

0

Answer 1

Hey Luis, thanks for reaching out. Bearing kits are sized off the axle weight capacity, so that will be the best way to determine exactly which kit you need. There should be a sticker on the axle tube that shows the weight capacity and other specs.…

view full answer...

Answer 2

It sure will Chris and welcome back! The Timken Bearing Kit item #TMK52VR is exactly what you need for your Dexter 3,500 lbs axle. This kit is sold per hub and includes new bearings, races, a seal, a tang washer, and a cotter pin. Dexter's E-Z…

view full answer...

Answer 3

Hey Douglas, since you have a 3,500 lb trailer axle the correct bearing kit would be the part #DX76ER which comes with the correct bearings and seal like you are looking for. This is exact same Dexter bearing kit as what you mentioned looking for.…

view full answer...

Answer 4

Hey Seth. The Dexter Bearing Kit item #DX76ER includes a triple lip grease seal and a new tang washer but does not have a new dust cap. The Dexter Bearing Kit w/ Dust Cap item #DX27UR includes a dust cap that fits a 1.980" pilot hole, a standard…

view full answer...

Answer 5

Hey Brian, since you are looking for a replacement bearing kit for your Dexter 3,500 lb axle the correct bearing kit would be the part #DX76ER. Then for grease caps that have access plugs to get to the grease fittings you'd want the part #DX69HR.…

view full answer...

Answer 6

Hey TJ! Yes, Dexter does have a bearing kit that will fit your axle #7359765. It is the Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle #DX76ER. However, they don't actually make these bearings. For the price, you're better…

view full answer...

Answer 7

Hey John, thank you for all of the info from your 3,500 lb trailer axle. The correct bearing kit would be the part #DX76ER that you referenced. Did you have a bearing fail or are you wanting to have a backup set on hand?

view full answer...

Answer 8

Hi Jordan! The Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle #DX76ER uses bearings and seals that are made overseas. They aren't really "branded", per se, but Dexter does have them made specifically for them. If you…

view full answer...

Answer 9

Hey Jeffrey, I was able to confirm that your Dexter axle is a 3,500 lb capacity axle so the correct bearing kit would be the Dexter kit part #DX76ER. Are you wanting to have a spare set on hand or did your bearings go out?

view full answer...

Answer 10

Thanks for the information Ryan. The Timken Bearing Kit item #TMK52VR is the correct one for your boat trailer. It includes inner and outer bearings and races, seal, cotter pin, and EZ lube spindle washer. This kit is sold per hub. For a grease cap…

view full answer...

Answer 11

Hey Jeremy, yes the bearing kit part #DX76ER that you referenced would be correct for the 3,500 lb axles you have on your enclosed trailer. Are you looking for a backup set to have on hand?

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Does Dexter Bearing Kit part # DX76ER Fit 3,500 lb Axle

Product Page this Question was Asked From

Continue Researching