See what our Experts say about this Yakima Roof Rack

• Can Roof Rack Tracks be Installed on A.R.E. Truck Cap
  Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch # Y01126, 54 inch # Y01127, and 60 inch # Y01135 lengths. These tracks are specifically designed for camper shells or truck caps like yours. To complete the setup you will just need the Landing Pad 1 # Y00221 (for which you will need a quantity of 2), 4 of the Yakima Control Tower part # Y8890027, and a set...
  view full answer...
  
• Replacement Crossbars for Yakima Rack and Roll Trailer
  Hey Don, so the round crossbars of a Yakima Rack and Roll trailer are the standard Yakima crossbars without a track that runs underneath so for replacements you would want the part # Y00411 for 78 inch bars or part # Y00410 for 66 inch.
  view full answer...
• How to Fit Two Sea Kayaks and a Thule Cargo Box on a Honda CR-V with Yakima Roof Rack
  I may have an option for you, but you will most likely not be able to fit two kayaks with J-style kayak carriers and the Evolution 1800 cargo box on 48 inch or 60 inch crossbars. Instead, I recommend looking at the Yakima Kayak JayLow, # Y04073. The JayLow can stack the kayaks on their sides giving you more room for the cargo box. You may need to upgrade to the 66 inch crossbars, # Y00410, due to the size of your cargo box, but that will also depend on the size of your kayaks. If you place...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Recommended Trailer Hitch and Roof Rack for 1999 Ford E150 Superwagon
  The Draw-Tite Ultra Frame Trailer Hitch Receiver # 41906 is a fit for your 1999 Ford E-150 Superwagon. It is a fit for 1995-2003 Superwagon models and will install easily with the included hardware. For the roof rack compatible with a Thule Cargo Basket or Cargo Box, I recommend the Inno Square Crossbars - Steel - Black - 65" Long - Qty 2 # INB165 and Inno Feet for Square Crossbars - Rain Gutters - 7-1/2" Tall - Qty 4 # INSD. To add a ladder, I recommend the Surco Universal Exterior...
  view full answer...
  
• Recommended Roof Rack and Basket for A.R.E. Cap with Yakima Tracks
  For your A.R.E. Truck Cap that features the Yakima tracks, you will just need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima crossbars, which come in varying lengths. For 58 inch bars use # Y00409 For 66 inch bars use # Y00410 For 78 inch bars use # Y00411 This will give you a complete roof rack system on your A.R.E. cap. Then for a cargo basket, I recommend taking a look at the Yakima MegaWarrior # Y07080. This is a really...
  view full answer...
• Parts Needed to Mount Rhino-Rack Pioneer Platform to Truck Topper with Yakima Tracks
  You need a complete roof rack wtih crossbars to mount the Rhino-Rack Pioneer Platform, part # RR42115BF, on your ARE topper. Since you already have Yakima tracks you can use four of the Control Towers, part # Y8890027, with two sets of Landing Pad 1, part # Y00221. Then choose the round crossbars at the proper length: 48 inches # Y00408 58 inches # Y00409 66 inches # Y00410 78 inches # Y00411 86 inches # Y00420
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for 2015 Chevy Silverado 1500 with A.R.E. Camper Shell
  Since the A.R.E. camper shells have tracks mounted on top of them you can use a Yakima round bar roof rack which will require 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper shell are made by Yakima, so this will give...
  view full answer...
• Recommended Roof Rack System for A.R.E. Camper Shell with Tracks
  The items mentioned in your question are exactly what you need to install a roof rack system to the A.R.E. Camper Shell on your Ford F-150. Just to confirm, you will need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper...
  view full answer...
• Can I Mount the Side Loader Mounting Brackets item # Y08002 on a Vertical Surface?
  Yes, they can Eric. The Side Loader Mounting Brackets item # Y08002 are designed to recreate rain gutters like you see on cargo vans. They do not require a specific angle to be functional. What you will want to look at is where you can mount them, and how far apart you need them to mount various items like bike racks, canoes, kayaks, cargo boxes, baskets or any other accessory. These are sold as a pair. Here are the rest of the parts you'll need to complete the roof rack: 1A Raingutter...
  view full answer...
• What Crossbars and Control Towers Fit A.R.E. Camper Shell Topper Rails on a 2012 Ford F-250SD
  The factory rails on your A.R.E. topper are made by Yakima. For a complete roof rack system on your 2012 Ford F-250 SD with the A.R.E. topper you will need the following parts: 4 of the Yakima Control Towers # Y8890027 2 sets (2ea) Yakima Landing Pad 1 # Y00221 1 set (2ea) Yakima Crossbars: 58 inch bars are # Y00409 66 inch bars are # Y00410 78 inch bars are # Y00411 I gave you three different size crossbars so you can choose depending upon what you want to carry. Before you load your...
  view full answer...
• 2019 Ram 1500 Fitment for Yakima HD Tracks and Tonneau Cover
  As long as you can fit the 2" wide Yakima 60" HD Tracks # Y74MR so you have no less than 1/8" overhanging the outside of your truck bed side (see attached) you're good to go. This then allows you to use 2 sets of the Landing Pad 26 # Y75ZR and SkyLine Towers # Y53TR for a base system. The 66" Round Crossbars # Y00410 might work but I'm not sure if you'll have the clearance for that since I'm not sure where the Yakima tracks will sit. If they truly can sit in the middle of your rails...
  view full answer...
  
• Can Yakima Roof Rack fit In Thule Camper Shell Roof Tracks
  Yes Yakima roof racks can fit the Thule roof rack tracks. To do that you will need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411.
  view full answer...
• Yakima Roof Rack that Fits Leer Truck Topper Tracks
  We have the Yakima roof rack components needed to install in the tracks on top of your Leer 100XR camper shell. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 # Y00221 quantity 4 of the Control Towers # Y8890027 and depending on the length of your cap quantity 2 Crossbars like: 48 inch # Y00408 58 inch # Y00409 66 inch # Y00410 78 inch # Y00411 To lock your roof rack to your tracks, I recommend the set of 4 lock cores with keys # Y07204.
  view full answer...
• Roof Rack Fit Recommendation for ARE Truck Topper
  There were versions of the A.R.E. camper shells that had tracks on them already. The factory rails were made by Yakima. For a complete roof rack system on your A.R.E. topper you will need the following parts if you have the rails: 4 of the Yakima Control Towers # Y8890027 2 sets (2ea) Yakima Landing Pad 1 # Y00221 1 set (2ea) Yakima Crossbars: 58 inch bars are # Y00409 66 inch bars are # Y00410 78 inch bars are # Y00411
  view full answer...
• Can I Mount the Thule UpRide to Yakima Round Bars?
  Yes you can! The Thule UpRide Roof Bike Rack part # TH599000 comes with both types of hardware. There is hardware for mounting it to the track in the aero type bars and clamps for mounting to the round, square and factory type crossbars like the Yakima Round Bars part # Y00410. Check out the video below it will show you exactly how the clamps work for mounting.
  view full answer...
• Yakima Roof Rack that Fits Roof Tracks on Leer Truck Canopy
  I spoke to my Yakima contact and he informed me that you will need the Landing Pad 1 # Y00221 for the tracks on your Leer camper. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 # Y00221 quantity 4 of the Control Towers # Y8890027 and depending on the length of your cap quantity 2 Crossbars like: 48 inch # Y00408 58 inch # Y00409 66 inch # Y00410 78 inch # Y00411 To lock your roof rack to your tracks, I recommend the set of 4 lock cores with keys # Y07204.
  view full answer...
• Roof Rack Solution for Truck Topper Using Artificial Rain Gutters
  The components in the photo you referenced are from Yakima. Yakima's artificial rain gutters are the Side Loader Brackets # Y08002. The roof rack towers for the rain gutter system are the Yakima 1A Raingutter Towers # Y00101, which come in a quantity of 4. These towers are designed for use with the Yakima RoundBar crossbars. Yakima crossbars come in a variety of lengths. Depending on how much overhang of the crossbar you want, the Round 58 Inch Crossbars for Yakima Roof Rack Systems...
  view full answer...
  
• Parts Needed to Install Yakima Roof Rack in ARE Truck Camper Shell Tracks
  I spoke to my Yakima contact and he informed me that you will need the Landing Pad 1 # Y00221 for the tracks on your ARE camper. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 # Y00221 quantity 4 of the Control Towers # Y8890027 and depending on the width of your cap quantity 2 Crossbars like: 48 inch # Y00408 58 inch # Y00409 66 inch # Y00410 78 inch # Y00411
  view full answer...
• Recommendation for Installing Yakima Roof Rack on Leer Cap with Thule Tracks
  You can indeed install a Yakima roof rack system on your Leer cap that features the Thule tracks. You will need to start with two of the Landing Pad 1 # Y00221, which are the pieces that will mount to the tracks to provide an attachment point for the towers. Then from there you will need 4 of the Control Towers # Y8890027. Then it is just a matter of selecting the crossbar length you are wanting. These are available in 48 inch # Y00408, 58 inch # Y00409, 66 inch # Y00410, and 78 inch...
  view full answer...
• Recommended Crossbars for the Pace Edwards UltraGroove Tonneau Covers
  For your 2017 Ford F-350 with the 6-3/4' bed, there are currently three different Pace Edwards UltraGroove Tonneau Covers available. There is an all metal powered version part # 311-KEFA18A44, all metal manual version part # 311-KMFA18A44, and metal/vinyl manual version part # 311-KRFA18A44. For the Yakima Round Bar system I recommend using part # Y00410 for the crossbars, part # Y8890027 (4) for the feet, and part # Y00221 (2) for the fit kit. The Yakima crossbars are cut to fit.
  view full answer...
• Roof Rack for a 2012 Ford E-350 Passenger Van
  There are roof racks that will fit your 2012 Ford E-350, but the Swagman Roamer # S80510 you referenced is designed to work with camper or truck shells and not passenger vans, because it requires drilling into the roof and would be permanently mounted. The roof rack I recommend for your E-350 would be the Yakima rack, which consists of round, 66" crossbars # Y00410 and Yakima 1A Raingutter Towers # Y00101, which, as the name suggests, clamp on to the rain gutters of your van. This rack...
  view full answer...
  
• Yakima Towers Needed to Mount to Landing Pad 1 on Track System
  It looks like you have the Yakima Landing Pad 1 for Yakima Control Towers # Y00221 on your A.R.E. Canopy, so I recommend using the Skyline Towers for Yakima Crossbars # Y53TR. These towers will allow you to choose between the Jetstream # Y00426 (60" long) / # Y00427 (70" long), the Yakima CoreBar # Y00422 (60" long)/ # Y00423 or use Round bars like the Yakima # Y00410 with the adapter # Y03536. These towers are not compatible with square bars that you had asked about in a previous question. If...
  view full answer...
  
• Can Old Yakima Round Crossbars And Q Towers Be Used With New System On 2024 GMC Sierra 2500HD?
  Hey there Bill, I got good news and some bad news. The good news is that we can piece together a kit and you can re-use your old Yakima crossbars since they are the same diameter as the new ones. The bad news is that you are correct in saying the Q towers won't work with your new vehicle so you'll need the new ones. The complete kit for your 2024 GMC Sierra 2500HD with naked roof is as follows, and remember you already have the crossbars so you technically do not need to buy more: -Yakima...
  view full answer...
• Best Roof Rack Fit for 2020 Jeep Gladiator
  The best roof rack for your 2020 Jeep Gladiator consists of the Yakima 1A Raingutter Towers # Y00101 and Round 58" CrossBars for Yakima Roof Rack System # Y00409. As you can see from the accompanying photo, which is from Yakima, this roof rack system will give your Gladiator a fantastic way to mount accessories like bike racks, kayak carriers or cargo boxes so you can get to your destination in style with all your needed gear. I also recommend using the Yakima Same Key System (SKS) Lock...
  view full answer...
  
• Recommended Trailer Hitch and Roof Rack for 1999 Ford E150 Superwagon
  The Draw-Tite Ultra Frame Trailer Hitch Receiver # 41906 is a fit for your 1999 Ford E-150 Superwagon. It is a fit for 1995-2003 Superwagon models and will install easily with the included hardware. For the roof rack compatible with a Thule Cargo Basket or Cargo Box, I recommend the Inno Square Crossbars - Steel - Black - 65" Long - Qty 2 # INB165 and Inno Feet for Square Crossbars - Rain Gutters - 7-1/2" Tall - Qty 4 # INSD. To add a ladder, I recommend the Surco Universal Exterior...
  view full answer...
  
• Will the Yakima 1A Raingutter Towers Work with the Kwik-Rail Mounting Brackets # Y08002?
  From the looks of your photo, you have the Side Loader Mounting Brackets for Yakima 1A Raingutter Towers # Y08002. I confirmed with my tech at Yakima that the Yakima 1A Raingutter Towers (QTY 4) # Y00101 fit these Kwik-Rail mounts. For theft-deterrence, I recommend the Yakima Same-Key Lock Cores # Y07204. If you need Yakima RoundBars to go with the towers and the brackets, I recommend one of the following crossbar sets: - Round 48" CrossBars for Yakima Roof Rack System # Y00408 - Round...
  view full answer...
  
• Can I Mount the Side Loader Mounting Brackets item # Y08002 on a Vertical Surface?
  Yes, they can Eric. The Side Loader Mounting Brackets item # Y08002 are designed to recreate rain gutters like you see on cargo vans. They do not require a specific angle to be functional. What you will want to look at is where you can mount them, and how far apart you need them to mount various items like bike racks, canoes, kayaks, cargo boxes, baskets or any other accessory. These are sold as a pair. Here are the rest of the parts you'll need to complete the roof rack: 1A Raingutter...
  view full answer...
• Looking For Towers For Yakima Rain Gutter Roof Rack
  Hello Mel, thanks for reaching out. We do offer the Yakima 1A Raingutter Towers by themselves as a 4-pack. Take a look at the following: - Yakima 1A Raingutter Towers - Qty 4 # Y00101 Or, if you are needing just one single tower, we have the following: - Replacement Yakima 1A Raingutter Tower (QTY 1) # Y8810137
  view full answer...
• Roof Rack Solution for Truck Topper Using Artificial Rain Gutters
  The components in the photo you referenced are from Yakima. Yakima's artificial rain gutters are the Side Loader Brackets # Y08002. The roof rack towers for the rain gutter system are the Yakima 1A Raingutter Towers # Y00101, which come in a quantity of 4. These towers are designed for use with the Yakima RoundBar crossbars. Yakima crossbars come in a variety of lengths. Depending on how much overhang of the crossbar you want, the Round 58 Inch Crossbars for Yakima Roof Rack Systems...
  view full answer...
  
• Replacement Boots and Clip Spacers for Yakima Y00101 1A RainGutter Roof Rack Feet
  Yakima refers to the part you're needing as a clip spacer for their 1A RainGutter Towers, part # Y00101. The replacement plastic clip spacers aren't available individually, they are included in the # Y8810136 replacement hardware bag, so potentially you could need both the # Y8810136 parts bag as well as the # Y8810008 replacement boots. This being said-as outlined in step 10 of the linked instructions you will not need the clip spacers if the backs of the roof rack feet do NOT touch the...
  view full answer...
  
• Roof Rack for 2022 Jeep Wrangler Unlimited for Roof Top Tent
  All of the roof racks we offer for your 2022 Jeep Wrangler Unlimited with the sky top roof have a 100 lb dynamic (when in use on highway) roof capacity including the Yakima Round Bar Rack # Y00409 and # Y00101 as well as the Rhino Rack roof rack part # RRVA150S-2, # RL210S2, and # RRVA-FK1-2. In general I prefer the Rhino Rack as you get a higher quality roof rack that has aero shaped bars which do better with wind noise as a better price than the similar quality racks that cost a lot more.
  view full answer...
• Roof Rack for a 2012 Ford E-350 Passenger Van
  There are roof racks that will fit your 2012 Ford E-350, but the Swagman Roamer # S80510 you referenced is designed to work with camper or truck shells and not passenger vans, because it requires drilling into the roof and would be permanently mounted. The roof rack I recommend for your E-350 would be the Yakima rack, which consists of round, 66" crossbars # Y00410 and Yakima 1A Raingutter Towers # Y00101, which, as the name suggests, clamp on to the rain gutters of your van. This rack...
  view full answer...
  
• Are There Limitations With A Rain Gutter Mounted Roof Rack On My 2019 2 Door Wrangler
  That may be the case with some rain gutter mounted roof racks, but not the Rhino-Rack SG Roof Rack for Rain Gutters - Vortex Aero Crossbars - Aluminum - Black, part # RRSG60. They crossbars can only be mounted at specific points. It also has a maximum weight limit of 88 lbs. Yakima's rain gutter roof rack for your vehicle has a maximum weight limit of 165 lbs. It will consist of the following: Round 58" CrossBars for Yakima Roof Rack System (QTY 2), part # Y00409 Yakima 1A Raingutter...
  view full answer...
• Yakima Raingutter Tower Roof Rack Parts for Truck Canopy
  I am happy to report that the hole spacing on Yakima Side Loader Mounting Bracket kit # Y08002 is indeed 4-1/8-inches center to center. Please refer to the linked photo. To complete a rack with these mounts you can use the 1A Raingutter Towers # Y00101, Lock Core kit # Y07204 and a set of Yakima round crossbars from the linked page. We have many lengths available, such as 58-inch bar set # Y00409. Other sizes are available too.
  view full answer...
  
• Kayak Load Assist for Jeep Wrangler Roof
  I have a few solutions for you. The first one is using your current roof rack and kayak carrier setup while using a step assist like Powerbuilt Adjustable Tire Step # ALL647596. This gives you a large step that attaches to your tire to help with loading and unloading of your kayaks. The Rightline Gear Moki Door Step # RL100660 is another option. It hooks into your door's latch and provides a step to give you better access to your roof. This style is nice because it allows you to reach...
  view full answer...
• Which Artificial Rain Gutters To Use with Yakima 1A Towers
  Yakima makes artificial rain gutters for use with the 1A towers # Y00101 with the part # Y08002 which would be what you'd want to use. The Rhino Rack gutters might work but they've never been tested so it's hard to say. The Rhino Rack gutter dimensions are 6-1/2" long and 1-1/2" wide.
  view full answer...
• How Do I Install the Replacement Clip for Yakima 1A Raingutter Tower # Y43FR?
  As far as the directions, Yakima only has instructions about how to mount the A1 Raingutters # Y00101 to the roof of your vehicle. I went ahead and attached those instructions for your convenience. Although, in order to install the replacement clip # Y43FR, you simply place the clip into place and then install the included rivet. Then, you attach the cap nut. I also attached a diagram that points to where this rivet/nut is located.
  view full answer...
  
• Roof Rack for 2021 Jeep Wrangler Unlimited with Sky One-Touch Roof for Platform Tray
  There really is only one roof rack option for the roof of your 2021 Jeep Wrangler Unlimited and it's the following round bar setup: - Round CrossBars for Yakima Roof Rack - 58" # Y00409 or 66" # Y00410 - Yakima 1A Raingutter Towers # Y00101 - HiRise Spacers for Yakima 1A Raingutter Towers # Y01101 Yakima does not have a version of the Jetstream that attaches to the raingutter towers. This rack would work with the Yakima LockNLoad Platform Rack for Crossbars # Y05048-39 you were wanting...
  view full answer...
• Can I Use Thule Rain Gutter Feet with Yakima Wide Body Artificial Rain Gutters
  I have a solution for you, but the Thule foot packs that attach to rain gutters like the # TH65BJ are only designed to fit on the Thule Artificial Rain Gutters # TH542. The Thule Rain gutter feet do work with most Thule crossbars, so you wouldn't need to get new bars in most cases, just the gutters and foot pack. With that say, if you wanted to use what's already there you can instead swap to Yakima Rain Gutter Towers # Y00101 and the Yakima Round Bars 48" # Y00408. Most roof boxes are...
  view full answer...
• Roof Rack for 2021 Jeep Wrangler Unlimited With Sky One-Touch Top
  I checked with our roof rack manufacturers, and there is one option for a roof rack that fits your 2021 Jeep Wrangler Unlimited with the Skye One-Touch retractable roof. This rack will work and still allow you to open the top so long as you use the recommended spacers. The entire rack for that will work is the following: - Round CrossBars for Yakima Roof Rack - 58" # Y00409 or 66" # Y00410 - Yakima 1A Raingutter Towers # Y00101 - HiRise Spacers for Yakima 1A Raingutter Towers # Y01101 You...
  view full answer...
• How to Carry Kayak at Front of 1992 Ford E-350 Van
  Thanks for the photos, and although we do have a solution for you, the Curt Vertical Receiver Adapter # C45013 will only work with vertical OEM hitch receivers, which your 1992 Ford E-350 does not have. Additionally, any type of adapter is going to cut the capacity of your trailer hitch in half - including the tongue weight so adding any type of adapter with the type of cargo you are carrying is likely to push you past your capacity limits. The best option to carry your kayak is going...
  view full answer...
  
• How To Use the Surco Safari Rack 5.0 Rooftop Cargo Basket On a 2006 Dodge Sprinter
  In order to use the Surco Safari Rack 5.0 Rooftop Cargo Baskets on your 2006 Dodge Sprinter you will need the Surco Safari Rack 5.0 Rooftop Cargo Basket for Yakima Roof Racks part # SPS5084-Y400 which mounts using the Yakima Round CrossBar System part # Y00101 and part # Y00411. This is the longest available roof basket we have for your Sprinter. I checked with Surco and they do not list any of the Surco Safari Rack 5.0 Rooftop Cargo Baskets for Factory Rails like part # SPS5084-1101...
  view full answer...
  
• Is the Yakima LockNLoad Platform Compatible with Yakima Round Bars
  Yes. The Yakima Rain Gutter Towers # Y00101 can be used in a complete roof rack system using the Yakima Round Bars # Y00409 to mount the LockNLoad Platform Rack for Crossbars - Aluminum - 55" Long x 49" Wide # Y05044-39. You won't be able to mount the LockNLoad directly to the roof though. It looks like you might have a 2020 Jeep Gladiator, so if you wanted to mount directly to your roof the best solution is the Rhino-Rack Pioneer Platform Rack with Backbone Mounting System - 48" Long...
  view full answer...
• What Roof Rack Fits My 2019 Jeep Wrangler Unlimited with Sky One Touch Roof?
  I have a great solution for you. Unfortunately, I confirmed with Rhino-Rack that the Rhino-Rack Roof Rack Legs - Gutter Mount - 8-1/4inch Tall # RL210S2 and the Rhino-Rack Vortex Aero Crossbars # RRVA150B-2 are not confirmed to fit your 2019 Jeep Wrangler 4-door Unlimited with a Sky One Touch roof. However, we currently do have a confirmed setup that will work from Yakima. For that system, I recommend the following parts for your vehicle: - Round CrossBars for Yakima Roof Rack - 58"...
  view full answer...
• Do Yakima Artificial Rain Gutters have to be Positioned in a Certain Place on a Truck Camper Shell
  When mounting artificial rain gutters like # Y08002 to a camper shell, there is no specific distance apart they must be placed. What you will want to look at is where you can mount them (the strongest points on the camper shell would be ideal) and how far apart you need them to mount various items like bike racks, canoes, kayaks, cargo boxes, baskets or any other accessory. Just remember that if you place the bars too far back then items on the roof may hang over the back end too much....
  view full answer...
• Hitch-Mount 2-Bike Rack for Use With StowAway Swinging Hitch-Mount Cargo Carrier on 2004 Ford Van
  Your StowAway Cargo bin with Swingaway frame is intended to be used only in its locked storage position (right up next to the vehicle) when it is loaded and you are on the road. It cannot be used without being locked in this position. According to my contact at Stowaway the swinging arm mechanism and your trailer hitch receiver could easily be damaged by such use. Given this there is no way you could fit a bike rack and two bikes between it and the rear of your Ford van. A safer option...
  view full answer...
  
• Do the Yakima Side Loader Mounting Brackets Have a Weight Capacity Rating
  The capacity of the Side Loader Mounting Brackets # Y08002 is going to be limited to the bar capacity or roof capacity, whichever is lower. In general, the raingutter feet, # Y00101, and crossbars will have a 165 pound capacity. You will need to consult the vehicle owners manual or manufacturer of the vehicle or item you are installing this on to determine the capacity of it. Always go by the lowest capacity.
  view full answer...
• Roof Rack for 2021 Jeep Wrangler Unlimited with Sky One-Touch Roof for Platform Tray
  There really is only one roof rack option for the roof of your 2021 Jeep Wrangler Unlimited and it's the following round bar setup: - Round CrossBars for Yakima Roof Rack - 58" # Y00409 or 66" # Y00410 - Yakima 1A Raingutter Towers # Y00101 - HiRise Spacers for Yakima 1A Raingutter Towers # Y01101 Yakima does not have a version of the Jetstream that attaches to the raingutter towers. This rack would work with the Yakima LockNLoad Platform Rack for Crossbars # Y05048-39 you were wanting...
  view full answer...
• Roof Rack for 2021 Jeep Wrangler Unlimited With Sky One-Touch Top
  I checked with our roof rack manufacturers, and there is one option for a roof rack that fits your 2021 Jeep Wrangler Unlimited with the Skye One-Touch retractable roof. This rack will work and still allow you to open the top so long as you use the recommended spacers. The entire rack for that will work is the following: - Round CrossBars for Yakima Roof Rack - 58" # Y00409 or 66" # Y00410 - Yakima 1A Raingutter Towers # Y00101 - HiRise Spacers for Yakima 1A Raingutter Towers # Y01101 You...
  view full answer...
• How to Carry Kayak at Front of 1992 Ford E-350 Van
  Thanks for the photos, and although we do have a solution for you, the Curt Vertical Receiver Adapter # C45013 will only work with vertical OEM hitch receivers, which your 1992 Ford E-350 does not have. Additionally, any type of adapter is going to cut the capacity of your trailer hitch in half - including the tongue weight so adding any type of adapter with the type of cargo you are carrying is likely to push you past your capacity limits. The best option to carry your kayak is going...
  view full answer...
  
• What Roof Rack Fits My 2019 Jeep Wrangler Unlimited with Sky One Touch Roof?
  I have a great solution for you. Unfortunately, I confirmed with Rhino-Rack that the Rhino-Rack Roof Rack Legs - Gutter Mount - 8-1/4inch Tall # RL210S2 and the Rhino-Rack Vortex Aero Crossbars # RRVA150B-2 are not confirmed to fit your 2019 Jeep Wrangler 4-door Unlimited with a Sky One Touch roof. However, we currently do have a confirmed setup that will work from Yakima. For that system, I recommend the following parts for your vehicle: - Round CrossBars for Yakima Roof Rack - 58"...
  view full answer...
• Replacement Parts for Yakima 1A Raingutter Roof Rack Towers
  It sounds like you are talking about the shear block bases # Y8810007 for the Raingutter towers such as # Y8810137. This is a set of 4. Other replacement parts for the Yakima Raingutter 1A towers include: Boot set # Y8810008 Another shear block set # Y8810006 Hardware kit # Y8810136
  view full answer...
• Roof Rack for 2022 Jeep Wrangler 4xe with Power Soft Top that Allows Top to Open
  I checked with Yakima and came up with a roof rack that fits your 2022 Jeep Rubicon 4xE with the Sky One Touch power top and will allow the soft top to open. You'd need the Yakima 1A Raingutter Towers # Y00101 with two of the crossbars # Y8810023. And then the spacer kit part # Y01101 which is what gives the clearance for the power top to open.
  view full answer...
• What Roof Rack do You Recommend for My 2022 Jeep Wrangler Unlimited with a Sky One-Touch Roof?
  For your 2022 Jeep Wrangler Unlimited with a Sky One-Touch Power Top, we only have one option that is confirmed to fit your setup. For a great system, I recommend the following components: - Yakima 1A Raingutter Towers (QTY 4) # Y00101 - HiRise Spacers for Yakima 1A Raingutter Towers # Y01101 - Yakima Round 58" CrossBars for Yakima Roof Rack System # Y00409 - Same-Key Lock Cores # Y07204 With this system, you will still be able to open/close your roof. You also get the security of the...
  view full answer...
• Roof Rack for a 2022 Jeep Wrangler Unlimited with OneTouch Skytop
  I do have an option for you. I checked with our manufacturers and was able to find one roof rack that will work for your 2022 Jeep Wrangler Unlimited with OneTouch Skytop. This rack will fit and still allow you to open the top as long as you use the recommended spacers. All of the parts needed for this rack are listed below. - Yakima 1A Raingutter Towers # Y00101 - Round CrossBars for Yakima Roof Rack - 58" # Y00409 - HiRise Spacers for Yakima 1A Raingutter Towers # Y01101 You can lock...
  view full answer...
• Carrying Kayaks And Operating The Sunroof On A 2021 Jeep Wrangler Unlimited
  The Yakima 1A Raingutter Towers (QTY 4), part Y00101, is not tall enough to work with the one touch sunroof on your 2021 Jeep Wrangler Unlimited. In order to operate the sunroof you need the tallest, 11", rain gutter towers. If you add the HiRise Spacers for Yakima 1A Raingutter Towers, part # Y01101, your towers will have the necessary height. You can add the Round 58" CrossBars for Yakima Roof Rack System (QTY 2), part #Y00409. This rack will have round bars, so any of our kayak carriers...
  view full answer...
• Rain Gutter Roof Rack Availability for a 1959 Rover P4
  The Yakima Tower Kit we have for Rain Gutters is part # Y00101. This has never been tested on your 1959 Rover P4 but it is designed to fit rain gutters like what you have. You would need two crossbars part # Y8810023 as well. The height of the gutter feet is 7-1/4 inches. I looked at pictures of the roof of your vehicle and it has a pretty rounded roof. If you needed a taller setup you would also need the spacer to increase the height part # Y01101 which will ad 3-1/2 inches.
  view full answer...
• Roof Rack That Is Compatible With My 2021 Jeep Wrangler Unlimited W/ Sky Roof And Rooftop Tent
  I do have a solution for your 2021 Jeep Wrangler Unlimited with the Sky Roof. You can get a Yakima roof rack with the HiRise spacers. It will consist of the following items: Round 58" CrossBars for Yakima Roof Rack System (QTY 2), part # Y00409 Yakima 1A Raingutter Towers (QTY 4), part # Y00101 HiRise Spacers for Yakima 1A Raingutter Towers, part # Y01101 Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204 It has a dynamic weight limit of 165 lbs. That is the weight limit of...
  view full answer...

Do you have a question about this Roof Rack?