See what our Experts say about this Rhino Rack Roof Rack

• Do Parts of Rhino Rack Roof Rack From 2012 Ford Escape Fit 2014 Ford F-150 SuperCrew Cab?
  I checked with Rhino Rack and the square bar roof racks that fit a 2012 Ford Escape and 2014 Ford F-150 do share the same # RRRLKHD 2500 Series legs which are for HD crossbars, so if that's what you have you would be able to use those legs on your F-150. If you have different legs there is NOT going to be a fit. Apart from that you are correct that you would need new crossbars and a new fit kit. The correct crossbars for the '14 F-150 would be the Rhino-Rack Heavy-Duty Roof Rack Crossbars...
  view full answer...
• Rhino-Rack Crossbars For a Roll-N-Lock Cover On a 2022 Jeep Gladiator
  The legs of the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT will fit the t-tracks of your Roll-N-Lock XT cover. We have had customers in the past use this in that fashion. The issues would come from the length of the crossbars. We have not fit the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT (65" crossbars) on a Jeep Gladiator, they are typically more for full size trucks. However, we have fit the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500B-2...
  view full answer...
  
• Weight Rating for the Rhino-Rack Gutter Mount Roof Rack on a 2022 Jeep Wrangler Unlimited
  You are correct, the Rhino-Rack SG Roof Rack for Rain Gutters with Vortex Aero Crossbars, # RRSG59 that you linked to is 88 lbs. But don't worry, we have other options. I suggest you consider the Rhino-Rack Backbone roof rack system that starts with the, Backbone System, # RRRJLB1 using Rubber Bases, # RRQMFK06, Spacer Blocks, # RRQMHD05-2 and Quick Mount Legs, # RRRLT600 along with 59" HD Crossbars, # RB1500B-2. This will provide you a heavier rating of 175 lbs. however, please check...
  view full answer...
  
• What is the Weight Rating of the Rhino-Rack Gutter Mount Roof Rack on a 2022 Jeep Wrangler Unlimited
  The weight rating for the gutter mount system from Rhino-Rack is really 88 lbs for your 2022 Jeep Wrangler Unlimited with the hard top. Since there are many other options out there with a higher rating I recommend going a different direction. For your application I recommend the Rhino-Rack Backbone roof rack system which consists of the following: 59" HD Crossbars - # RB1500B-2 Quick Mount Legs - # RRRLT600 Backbone System - # RRRJLB1 Rubber Bases - # RRQMFK06 Spacer Blocks - # RRQMHD05-2 This...
  view full answer...
  
• Do Vortex and Rhino Rack HD Bars Have Same Weight Capacity
  The bar of the Heavy Duty Rhino Rack roof racks like the part # RB1500B-2 is designed to be stronger than a Vortex like the # RRVA150B-2 but the feet of the racks are made so similarly that they become the weakest component and the reason the HD bars have same rating as Vortex.
  view full answer...
• Recommended No-Drill Roof Rack System To Attach A Rhino Rack Pioneer Platform On 2017 Ram 1500
  To attach the Rhino-Rack Pioneer Platform Roof Tray - Aluminum - 60" Long x 56" Wide # RR42113BF to your 2017 Ram 1500 Crew Cab without drilling you'll need to first install the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long - Qty 2 # RB1500B-2, Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 # RRRLKHD, and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK043. This system will clamp onto...
  view full answer...
• What Backbone System Works w/ a 2023 Jeep Wrangler 4xe?
  There are tons of options for Jeep's so I would be happy to point you in the right direction. The correct back bone system with a pioneer platform for your 2023 Jeep Wrangler 4xe hard top is the item # JB0893 you were looking at. The Rhino-Rack Pioneer Platform Rack with Backbone Mounting System item # JB0893 measures 72" long x 56" wide. It has a 264 lbs capacity and weighs 94 lbs. If you are wanting a back bone system that mounts traditional crossbars you will need the following...
  view full answer...
• How Can I Attach A Pioneer Platform To My 2021 Ram 2500 With A Retrax Pro Tonneau Cover
  I can definitely get you pointed in the right direction, but without knowing the specific Pioneer Platform you recently purchased, there will be a few different ways you will have to install the platform to your Retrax Pro. I did speak with a Rhino-Rack representative, so I will be covering all of the installation options. If you do not have a universal fit Pioneer Platform, you can have one of two platform series, the 4200 or the 5200. If your Pioneer Platform does not have a ruler...
  view full answer...
• Roof Rack System for ATC Truck Bed Caps
  According to my research, the ATC truck bed caps used Rhino-Rack RTC-Style Roof Rack Tracks like part # RTC16. Therefore, I recommend taking a look at the Heavy-Duty Crossbar System part # RLTP-2 and part # RB1500B-2. The heavy-duty cross bars have a 220 lb weight capacity which is far superior to other rooftop mounted crossbars. However, the increased weight capacity means the crossbar is physically bigger which limits the amount of available accessories that can be attached to them.
  view full answer...
  
• Do Rhino Rack Vortex Crossbars Have an Upward Curvature?
  The Rhino-Rack Vortex Bars are slightly bowed in the longer bar options to help support the weight when applied to the center of the bar. Most manufacturers have this as a part of the aero bar design. If you want a more straight bar, then you will want to instead use the heavy duty bars like # Y01-120B-NT for the track system or # RB1375B-2 for just the crossbars. There are longer bars like # RB1500B-2 and # RB1650B-2 if desired.
  view full answer...
• Which Heavy Duty Crossbar Setup Should I Use On My 2015 Ford F-350 Super Duty?
  I am showing that the correct Rhino-Rack heavy duty crossbar setup for your 2015 Ford F-350 crew cab is Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long # RB1500B-2. You will also need Leg Kit # RRRLKHD and Fit Kit # DK190 to install this onto your roof. This has a 165lb weigh capacity and is 59" long. You can install accessories by clamping onto the crossbars or by using the T-slot track. I have attached an installation video showing this roof rack being installed on a different...
  view full answer...
• Mounting Rhino-Rack Pioneer Platform 52113F to 2022 Ford F-150 Raptor With PowertraxPRO XR Tonneau
  Hey John! Rhino-Rack used to have a version of the Pioneer Platform with a universal mount but it is no longer around and neither are those clamps. However, you can still add crossbars and install the platform on your PowertraxPRO XR # RTX32SR. You will need the Rhino-Rack Quick Mount Legs # RRRLT600, Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500B-2, and the Roof Rack Leg Spacer Blocks # RRQMHD05. Then you will need the Pioneer Platform Mounting Kit for Rhino-Rack Heavy-Duty Crossbars...
  view full answer...
• Recommended Aero-Style Roof Rack for 2018 Land Rover Range Rover Sport with Bare Roof
  We do have an aero-style roof rack for your 2018 Land Rover Range Rover Sport that has a bare roof and it comes from Rhino-Rack. Rhino-Rack's Vortex Series racks provide exceptional value as compared to the competing products from Thule and others. These wing-like cross bars will indeed generate less wind noise than all other bar shapes. For your Sport I recommend the black ROC25 rack, part # RR94XR. I recommend this specific one because it will provide the nicest and most-OEM-like appearance...
  view full answer...
  
• Can I use vortex bar?
  The Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars part # RRRLKHDH are designed for Rhino-Rack Heavy-Duty Crossbars like part # RB1500B-2. The Rhino-Rack Vortex Aero Crossbars like part # RRVA165B-2 are designed for Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars part # RRRLKVA. I have attached our full list of Vortex Aero and Heavy-Duty crossbars below.
  view full answer...
• How to Mount Putco 40 LED Light Bar on 2006 Honda Ridgeline
  The Putco Luminix Off-Road LED Light Bar # P10040 is a fit for your 2006 Honda Ridgeline as long as you have the Bumper Mounting Bracket # P2255 installed, yes. In order to install something without modifying anything on your Ridgeline we'll have to install a roof rack, like the Rhino-Rack HD model listed below, and then use same-brand LED light mounting brackets like what we find with part # RR43174. 59" HD Crossbars - # RB1500B-2 2500 Series Legs - # RRRLKHD Fit Kit - # DK155 Since...
  view full answer...
• Will Rhino-Rack Roof Rack Fit 2006 Jeep Wrangler Rubicon
  The Rhino-Rack Roof Rack Legs # RL150S2 are designed to fit factory rain gutters on certain models of the Jeep Cherokee and Liberty. Unfortunately, there is not a rain gutter mount for your Rubicon. If you want to add the Rhino-Rack square bars shown with these legs to your 2006 Jeep Wrangler Rubicon you will need the following: -Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500B-2 -Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 -Rhino-Rack RT-Style Roof Rack Tracks...
  view full answer...
• How Was Rhino Rack Roof Rack Spread for 2014 Chevy Silverado 1500 Decided
  Roof rack companies like Rhino Rack pick the required spread for their roof racks like the # RB1500, # RRRLKHD, and # DK377 based on where the roof is reinforced the best. We have to recommend you always go with the required spread, otherwise you could potentially damage the roof of your vehicle or the rack may not secure properly. Even though the spread is narrower than you'd like (most racks are right at this same spread) you can still use a canoe carrier like the Yakim KeelOver # Y04069...
  view full answer...
• Will Thule Atlantis Cargo Box Fit Rhino-Rack Heavy Duty Crossbars
  Since the Thule Atlantis Cargo Box is no longer being manufactured, I cannot verify which crossbars the box will work with. I spoke with my contact at Thule, but since they do not test their products with other manufacturer's roof racks, they were unable to tell me if the cargo box will fit. They did tell me that the Atlantis will fit any Thule roof rack crossbars. I can give you the dimensions of the Rhino-Rack heavy-duty crossbars we offer and you will need to measure to see if the clamps...
  view full answer...
  
• 2020 Jeep Gladiator Roof Rack And Adarack A38ZR Ladder Rack Combination
  The best way to pull this off is to use the same company for the ladder rack and the roof rack. If that is not possible, your next best option would be to pick the ladder rack last, after getting the roof rack installed. Then you can pick an adjustable ladder rack to get as close to the making the two racks level. The Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - Matte Black - 500 lbs, part # A38ZR, is a good choice for your 2020 Jeep Gladiator. It is compatible with some...
  view full answer...
• Recommended Roof Rack System For Installing Rhino-Racks Pioneer On 2020 Jeep Gladiator HardTop
  There is an option to mount the Rhino-Rack Pioneer Platform Roof Tray # RR62TB you were looking at to the roof of your 2020 Jeep Gladiator Hardtop. You will need to first install the Rhino-Rack HD Crossbar Roof Rack System which uses 59" Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500B-2, and Rhino-Rack Roof Rack Legs - Gutter Mount # RRRL110S5-2. You will also need Pioneer Platform Mounting Kit for Rhino-Rack Heavy-Duty Crossbars # RR43105. The only down side of this system is that...
  view full answer...
  
• Taller Gutter Mount Rhino Rack Legs For A 2021 Jeep Wrangler Unlimited With Sky One-Touch Power Top
  I'm glad they worked for you and thanks for letting us know! Information and fits from real world applications are definitely invaluable to us and knowing that the Rhino Rack 8-1/4" Tall Gutter Mount Roof Rack Legs # RL210DS8 fit your 2021 Jeep Wrangler Unlimited with the Sky One-Touch Power Top helps out us, and others, heaps. I'm not sure what size bars you used for your set up, but it looks like we recommend the 59" Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500B-2 to complete the...
  view full answer...
• Height Added to Vehicle with Rhino Rack Foot # RRRLKHD
  We've had a similar question to this in the past and we've found that the Rhino Rack HD roof racks that use the feet part # RRRLKHD and also part # RB1500B-2, # RRRLKHD add right at 4-1/2 inches of additional height that would mean the feet without the bar would be a little less than 3 inches in overall height.
  view full answer...
• Can I Upgrade To 71" Rhino-Rack Heavy Duty Crossbars Instead Of 59" Crossbars On 2012 Jeep Wrangler?
  For your 2012 Jeep Wrangler Unlimited with hard top, Rhino-Rack recommends using Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" # RB1500B-2 along with Legs # RRRLT600, Backbone Mounting System # RRRJKB1, and Leg Spacers # RRQMHD05-2. While Rhino-Rack does not suggest using the 71" Heavy-Duty Crossbars # RB1800B-2 that you were looking at, you can certainly use them as long as they are not longer than the widest point of your vehicle which is usually the mirrors. My research tells...
  view full answer...
• Can Tracks of Rhino-Rack # Y02-490B Be Cut To Desired Length?
  The Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 54" Long # Y02-480B can in theory be used on your 2010 Jeep JKU Wrangler hard top but it is not a confirmed fit. The tracks can be cut to your desired length. Because this system is not a confirmed fit, the rated capacity will most likely be more similar to the 99 lbs of the similar Rhino-Rack Track fit confirmed for your vehicle. That rack consists of # RB1500B-2, # RRRLT600, # RTC12JWMY11,and # RRQMHD05-2.
  view full answer...
• Which Rhino Rack Pioneer Platform Can Attach to Vortex Aero Crossbars
  I have a solution for you, but the Rhino Rack Pioneer Platform # RR25TB is designed to mount directly to either a Rhino Rack fit kit or Rhino Rack HD bars so you'll need a Pioneer platform that mounts to crossbars. There are 2 different sizes of the Pioneer platform that can be attached to Rhino Rack Vortex Aero bars: - Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 48" Long x 38" Wide # RR42114BF - Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum...
  view full answer...
• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• What Roof Rack Do You Recommend for a Camper Shell with Tracks?
  For a great roof rack system for your A.R.E. Mx truck cap, I recommend the Rhino-Rack Roof Rack for Factory Tracks - 59" # Y02-490B-NT. The Rhino-Rack Roof Rack includes 2 Vortex Aero black, elliptical crossbars that you can use to hold ladder racks, conduit cases, and other work accessories. In addition, the Rhino-Rack Roof Rack crossbars come with a 220 pound weight capacity. I recommend checking the user's manual on your camper shell to make sure it can accommodate that much weight. If...
  view full answer...
  
• Will the Rhino-Rack RLTP Legs Fit on My Retrax XR Cover on My 2018 Ford F-150?
  I have a great solution for a rack that works with the rails on your Retrax XR tonneau cover on your 2018 Ford F-150. Unfortunately, the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall # RLTP-2 will not fit the Retrax XR rails. However, Rhino-Rack does make legs that are designed to fit the Retrax XR rails. Those are the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600. Sadly, with these legs, you will not...
  view full answer...
• Can I Fit A Rhino Rack Pioneer Platform To My Retrax XR Series Tonneau Cover
  You have two options; The first option is to install the Rhino-Rack Vortex Crossbar System for Retrax XR Series Tonneau Covers - Black - 65" Long, part # RRVA165B and part # RRRLT600. The feet attach directly to the RetraxPrO XR Hard Tonneau Cover - Retractable - Aluminum - Matte Black - Accessory T-Slots, part # RTT-80852. The Vortex Aero crossbars will attach to the the legs. With this fit you will be limited to Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 48"...
  view full answer...
• How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
  There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
  view full answer...
• Roof Rack or Ladder Rack for Trailer For Roof Top Tent
  There are a couple options to add a rack system to your trailer, depending on what type of trailer you have. For an enclosed trailer with rain gutters you can install the Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28. Another option is to use a track-mounted system from Rhino-Rack. You will need the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 50" Long # RRRTV128, Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600 and crossbars,...
  view full answer...
• Parts Needed To Mount A Rhino-Rack Platform To The Roof Of A Ford E-350
  Hey William, What is the year of your Ford E-350? There might be a naked roof fit kit that can fit. If not you would need to go with the Rhino-Rack RTC-Style Roof Rack Tracks - 55" Long # RTC14 and rivet it to the roof. If needed you can cut the length down from the side without the opening in the channel for accessories to better fit your roof. From there you can then install the Rhino-Rack Quick Mount Legs # RRRLT600 and some spacers blocks # RRQMHD05 to connect the platform directly...
  view full answer...
• What Adapter Will Fit My Retrax Tonneau Cover to Let Me Use the Yakima OverHaul HD on My 2019 Tacoma
  If you have a Retrax tonneau cover on your 2019 Toyota Tacoma (5-ft. bed) like the RetraxONE XR # RTT-60851 or the RetraxPRO XR # RTT-80851, the adapter that you need to use the Yamkima OverHaul HD # Y01151-58 is the Tonneau Cover Adapter Kit for Yakima OverHaul HD # Y01155. As far as mounting a Rhino-Rack pioneer platform on the OverHaul HD, the only platforms that will fit are the Rhino-Rack Universal Pioneer Platform Rack part # RR42114BF which is 48" long x 38" wide and part # RR42115BF...
  view full answer...
• Will 65" Rhino-Rack Crossbars Fit RetraxPRO XR Tonneau Cover T-Slots On A Ford F-150
  Hey Zach, Rhino-Rack crossbars have an 11-3/4" mounting track on the both sides of the bottom of the crossbar. At 65" this would mean that the spacing of the t-slots in your cover would need to sit roughly 55" to 64" apart in order to fit. To mount the 65" crossbars # RRVA165B-2 in the track you'll need their quick-mount legs # RRRLT600.
  view full answer...
  
• Roof Rack For A 2004 Acura TSX
  Hi Manny! We do have a couple options for custom fit roof racks that will fit your 2004 Acura TSX, but Rhino Rack does not have one available, unfortunately. That doesn't mean you are completely out of luck, but you would need to install a Rhino Rack set up a different way. I have the parts needed to do this listed below: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 55" Long - Qty 2 # RTC14 Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks...
  view full answer...
• Replacement Leg Tower and Foot for a Rhino Rack RTL600
  Hey Steve! I do not have an individual set of the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item # RRRLT600 but I have a two pack item # RRRLT600H.
  view full answer...
• Can Rhino Rack Sportz Aero Crossbars be Used in ARE Cap Channels
  Hey Ken, yes you can use the Rhino Rack crossbar set part # RR25AG in the tracks of your ARE cap with the feet kit part # RRRLT600 and you'd be set. What are you planning on carrying with the rack?
  view full answer...
• Recommended Truck Bed Crossbar Kit for a 2024 GMC Sierra 1500
  Tony, the only way I understand you'd be able to use your Rhino-Rack bars # RR63ZE with your 2024 GMC Sierra is by installing a tonneau cover with T-slots so you can then use the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600. If you didn't want to also install a tonneau cover, then your only other option would be a new system in which you could use the Yakima BedRock HD Truck Bed Rack # Y01160-59, which would not require a tonneau cover, simply just clamps onto your...
  view full answer...
• Availability of Rhino-Rack Crossbars for BAKFlip MX4 With Rails on 2023 Chevy Colorado
  Hey Dustin! It is possible to add a Rhino-Rack crossbars to the BAKFlip MX4 Hard Tonneau Cover # BAK83AV. The Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 will fit in the tracks on the rails and then you can choose your crossbars. A ladder rack like the Yakima OutPost HD # Y01152-5855 uses 68" crossbars which are a pretty good fit on the Colorado. You might be able to use 65" bars like # RR85AG but I think the 71" Rhino-Rack Sportz Aero # RR25AG would be the best fit....
  view full answer...
• Will Rhino-Rack Pioneer Platform Fit Westin EXP Truck Topper on 2019 Chevy Colorado
  Hey Ash! It is possible to add a Rhino-Rack Pioneer Platform to the Westin EXP Truck Topper # W76PT. The topper is 75.6" long and 63.3" wide. The distance between the mounting rails is 38.78" and the rails are 54" long. The Rhino-Rack Quick Mount Legs # RRRLT600 will fit the rails and are compatible with the Pioneer Platform. These can slide along the crossmember to match the width of the rails on the topper for installation. For the platform I recommend using the # RR59AP which is 75"...
  view full answer...
• Recommended Tonneau Cover and Bike Rack for a 2024 Ford Ranger
  Hey John, welcome back and thanks for the email! I was able to track down all of the parts in the pictures you provided and find the same model tonneau cover that fits your 2024 Ford Ranger XLT with a 5' bed. I have listed all of the parts below: Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover - Aluminum - Matte Black item # PE94NJ Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 item # RRRLT600 Rhino-Rack Vortex Aero Crossbars...
  view full answer...
• Best Roof Rack Options for a 2016 Land Rover Discovery/LR4
  Absolutely! A Land Rover Discovery is referred to as the Land Rover LR4 here in North America. This is not to be confused with the Land Rover Discovery Sport which is an entirely different vehicle altogether. The Discovery/LR4 came with two different roof options which were a bare roof and roof with factory installed tracks. If you have the factory installed track system then you can use the Rhino-Rack Vortex Aero Crossbar System which is composed of the the crossbars part # RRVA137B-2,...
  view full answer...
• Roof Rack Tracks & Basket That is Heavy Duty
  Hi Morris, While there isn't anything specific to your 2022 Roxor, there are rivet-mounted tracks you can add. I'm not sure the length you need, but the shortest available is the 36-1/4" long Rhino-Rack RT-Style Roof Rack Tracks # RRRTS540. Then you'd need a roof rack that fits the tracks, and for that you would add the Rhino-Rack Quick Mount Legs # RRRLT600. To complete the rack set up you'd need crossbars, with the right length depending on the width of your roof/cab enclosure. You...
  view full answer...
• Recommended Crossbars and Feet for a LEER Camper Shell with Thule Tracks
  Ok Sean, so I was able to track down some info about your LEER camper shell and it looks like you ordered it with the Thule tracks already installed. So, if that's the case, you can then use either the Thule Tracker II feet with the Thule WingBar Crossbars # TH711520, or you can use the Rhino-Rack Vortex Aero Crossbars # RRVA165B-2 with the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 for a more cost-effective non-Thule setup.
  view full answer...
• Correct Rhino-Rack Roof Rack Channel Nuts for Trailer with Rhino-Rack Factory Roof Tracks Installed
  I spoke with Rhino-Rack and was able to confirm that both the part # RRQMFK11 (30mmx25mmx5mm) and N057-BP (24mmx21mmx4mm) are compatible with the Rhino Rack Factory Roof Tracks. If you're looking to mount a set of crossbars to these tracks, you'll need a few items which I have attached for you below. Rhino-Rack Quick Mount Legs part # RRRLT600 (Comes With RRQMFK11) Rhino-Rack Vortex Aero Crossbars part # RRVA180B-2 If you need a different size crossbar, you can choose this from the list...
  view full answer...
• Rhino-Rack Crossbars for Retrax Pro XR on 2022 Ram 1500 With RamBox
  Hi Mike; the Rhino-Rack that is typically paired with the RetraxPRO XR # RTX82XR is the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers # RRVA165B-RRRLT600. However, I'm not sure if this will interfere with the use of your RamBox system. These are 65" crossbars so I would measure to see if it will cross the point where the storage opens. Depending on your measurement and how far apart the T-slots in the cover are you may be able to use the Rhino-Rack Quick...
  view full answer...
• What Mounting System Do I Need to Use for the Pioneer Platform # RR42108BF on My Leer 100XR Shell?
  I have a great platform solution for you. Unfortunately, the Rhino-Rack Pioneer Platform 72" Long x 56" Wide RR42108BF is discontinued. However, with the recommended fit of the Rhino-Rack Pioneer Platform Rack for Short Camper Shells - Backbone - 60" Long x 56" Wide # RR63ZW, you will have both the platform and the mounting hardware available for installation with the modular Backbone. The Modular Backbone is designed to fit the track on the 100XR.
  view full answer...
• Rhino-Rack Roof Rack for Truck Cap Track System
  For your truck topper with existing track system, I recommend the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 2 # RLTP along with the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 65" Long # RB1650B-2. If you prefer the vortex style bars then use Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 and # RRVA165B-2.
  view full answer...
• Replacement Crossbar and Feet Recommendation for Rhino Rack Backbone Roof Rack Kit
  If you have the Rhino-Rack Backbone Roof Rack Mounting System # RRRJKB1 on your Jeep already you should have a roof rack that has 3 crossbars already. Do you need additional crossbars or are you looking for a carrier of some type to carry a bike or kayak carrier?
  view full answer...
• Recommended Rhino-Rack Roof Rack W/ Backbone System for a 2013 Jeep Wrangler Unlimited
  Hey John, it sounds like you're looking for the Rhino-Rack Vortex Roof Rack # RR44RE using the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600-3, and the Rhino-Rack Backbone Roof Rack Mounting System # RRRJKB1, and the Roof Rack Leg Spacer Blocks for Rhino-Rack Vortex Aero Crossbars # RRQMVA05. From here, you can mount the Rhino-Rack Pioneer Roof Rack Platform for Crossbar # RR42115BF.
  view full answer...
• Which Legs To Attach Rhino-Rack Pioneer To Rhino-Rack Backbone Roof Rack On 2013 Jeep Wrangler
  The correct legs to attach the Rhino-Rack Pioneer Platform Roof Tray like the # RR52TB to the Rhino-Rack Backbone Roof Rack Mounting System # RRRJKB1 on your 2013 Jeep Wrangler Unlimited is the Rhino-Rack Quick Mount Legs # RRRLT600-3. If you do not already have the leg spacers you will also need the # RRPLHS4. I included videos for the Backbone # RRRJKB1 for you to take a look at.
  view full answer...
• What Yakima Roof Rack Will Fit My 2018 Toyota 4Runner With Fixed Points
  After reading your question, it appears that you would like your front crossbar to be further forward on the roof of your vehicle. The Yakima system you are referencing, the old Q-tower system or its replacement the BaseLine system, are for naked roof applications. That does not apply to your vehicle. Your 2018 Toyota 4Runner has raised rails with fixed points, so a rack that attaches to the frame of your vehicle will not work. Your roof rack will attach via the Yakima Landing Pads which...
  view full answer...
  
• Three Crossbar Roof Rack for 2017 Jeep Wrangler Unlimited Hardtop for Carrying Roof Tent
  For your 2017 Jeep Wrangler Unlimited with a hard top the three crossbar Rhino Rack roof rack part numbers # RRVA150B-3, # RRRLT600-3, # RRRJKB1, # RRQMFK05, and # RRQMVA05 would be an excellent option with more than enough weight capacity for the tent you have. Three bars is going to give you a more stable base for the tent so it is for sure the way to go. Cost and availability is available at the attached link for the mentioned roof rack
  view full answer...
• Can The Rhino Rack RCL Legs Be Used With Other Brands Of Platform?
  It seems that you are on the right track here. The RCL legs # RRRCL6 and backbone kit # RRRJKB1 are exactly what you will need in order to mount a platform on the roof of your 2016 Jeep Wrangler. That said, the legs are made specifically to work with the Rhino Rack Pioneer platforms. The pioneer platform has a track on the bottom that accepts a 30 mm x 25 mm x 5 mm track nut. I cannot confirm that this will work with other brands of platform, but as long as your platform has a track underneath...
  view full answer...
• Recommended Roof Rack For Installing Roof Tent On 2018 Jeep Wrangler Unlimited
  The best and easiest way to install a roof rack is via the gutter system on your 2018 Jeep Wrangler Unlimited with hard top. This is actually a very safe and secure way of installing a roof rack as I have not seen any customer feedback stating that their system has slipped off or anything of that nature. For this, I recommend going with the Thule WingBar Evo Crossbars Silver - 60" # TH711500 (or # TH711520 for Black) along with Gutter Feet # TH93ZR. The dynamic weight capacity is 175lbs...
  view full answer...
• Recommended Roof Rack System for 2013 Jeep Wrangler Unlimited to Carry Roof Tent
  In order to be able to use a roof top tent on your 2013 JKU with a hard top you'll need to use the Rhino Rack BackBone System, which reinforces the hard top and does not use the rain gutters that would normally be used to mount a standard roof rack system on the JKU. As a fellow Jeep JKU with a hard top owner, this is the only way that I would even think about mounting a roof tent on my baby and it's going to give you the capacity to carry a tent with ease. The BackBone roof rack system...
  view full answer...
• Rhino Rack Roof Rack for 2018 Jeep Wrangler JLU Mounted Behind Removable Tops
  The Rhino-Rack SG Roof Rack for Rain Gutters - Vortex Aero Crossbars - Aluminum - Black # RRSG59 is only rated for the 88 lb load when installed in the exact way shown. Installing behind the removable tops will work for securing the crossbars when not in use, but it is not recommended to carry a load in that location. If you want the behind the removable tops section, then you will need to reinforce the hardtop. For this I recommend the Rhino-Rack Backbone Roof Rack Mounting System -...
  view full answer...
  
• How to Attach a Rhino Rack Pioneer Platform to a Hard Top 2013 Jeep Wrangler Unlimited
  Yes, your 72" x 56" Rhino Rack Pioneer Platform item # RR52TB will fit the hard top 2013 Jeep Wrangler Unlimited. You will need the Rhino-Rack Backbone Roof Rack Mounting System item # RRRJKB1 to install it. I have linked an installation video below.
  view full answer...
• Which Rhino Rack Pioneer Platform Fits 2018 Jeep Wrangler Unlimited JK
  Since you have the 2018 Jeep Wrangler Unlimited that is a 4 door you would need a different Backbone kit of # RRRJKB1 which comes with the Pioneer Platform part # RR68FM that fits your Wrangler. You are correct the part # RRRJKB2 does only fit the 2 door models.
  view full answer...
• Best Roof Rack for 2015 Jeep Wrangler Unlimited Sahara Hardtop
  We can help you with a roof rack to install on your Jeep Wrangler Unlimited hardtop. For value, good looks and capacity go to the Rhino-Rack Vortex system made of parts # RRVA150B-2, # RRRLT600, # RRRJKB1 and # RRQMFK06. This racks provides 56-inches of available bar space for your cargo.
  view full answer...
  
• Can I Install Exposed Roof Rack AND Rhino-Rack Roof Rack To Carry Tent On 2014 Jeep Wrangler?
  You won't have the room to properly add a second roof rack like Exposed Racks Roof Rack # ER37FR to your 2014 Jeep Wrangler Unlimited since it already has a Rhino-Rack roof rack consisting of the following parts: Vortex Aero Crossbars 59" # RRVA150S-3, Legs # RRRLT600-3, BackBone # RRRJKB1, Bases # RRQMFK05, and Spacers # RRQMVA05. Even if you did have room to fit the Exposed rack onto the roof gutters, I don't think this would be a good idea since the height would be different for each...
  view full answer...
• Can I Upgrade To 71" Rhino-Rack Heavy Duty Crossbars Instead Of 59" Crossbars On 2012 Jeep Wrangler?
  For your 2012 Jeep Wrangler Unlimited with hard top, Rhino-Rack recommends using Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" # RB1500B-2 along with Legs # RRRLT600, Backbone Mounting System # RRRJKB1, and Leg Spacers # RRQMHD05-2. While Rhino-Rack does not suggest using the 71" Heavy-Duty Crossbars # RB1800B-2 that you were looking at, you can certainly use them as long as they are not longer than the widest point of your vehicle which is usually the mirrors. My research tells...
  view full answer...
• What is the Correct Rhino-Rack Platform Rack for a 2015 Jeep Wrangler Unlimited Hard Top
  We have a Pioneer Platform for you, but the Rhino-Rack Pioneer Platform Rack with Backbone Mounting System - 72" Long x 56", part # JB0892, that your referenced is not the correct fit for a 2015 Jeep Wrangler Unlimited hard top. The correct one for you is a combination page that I have linked to below. That combination is made up of: Pioneer Platform Roof Tray - Aluminum - 72" Long x 56" Wide, part # RR42108BF Quick Mount Legs, part # RRRLT600-3 Backbone Roof Rack Mounting System, part...
  view full answer...
• Rhino Rack Roof Rack Recommendation for 2018 Jeep JK Wrangler for Fishing Rod Carrier
  For your 2018 Jeep JK Wrangler Unlimited the Rhino Rack roof rack part numbers # RRVA150B-2, # RRRLT600, # RRRJKB1, and # RRQMFK06 are what you need. This is an aero bar roof rack confirmed as a fit for your vehicle that will minimize wind noise that will fit and install well and is compatible with the Rhino Rack Fishing Rod Carrier part # RR573F. Rhino Rack roof racks are great because you get the higher quality of the more expensive brands but at a better price.
  view full answer...
• Can Thule Hullaport XT Attach to Top of Rhino Rack Pioneer Platform Tray
  There's actually an adapter for the Thule Hullaport XT part # TH849000 that would allow it to fit into the channels on top of the Rhino Rack Pioneer Platform for your 2014 Jeep Wrangler Unlimited part numbers # RR42108BF, # RRRLT600-3, # RRRJKB1, and # RRPLHS4.
  view full answer...
• Recommended Platform Rack and Ladder for a 2009 Jeep Wrangler Unlimited
  A cargo basket with a rack is not something we carry, however I do have another solution. What you can do is install a set of crossbars # RRVA150B-2 with the Rhino-Rack Quick Mount Legs # RRRLT600, Rhino-Rack Backbone Roof Rack Mounting System # RRRJKB1 and the Rubber Bases for Rhino-Rack RRRLT600 Quick Mount Legs # RRQMFK06. From here, you'd need to install a platform rack # RR52TB to then be able to use the Folding Ladder for Rhino-Rack Pioneer Platform Rack # RRRAFL. It's a long way...
  view full answer...
• Parts Needed to Install the Rhino-Rack Pioneer Platform Rack on a 2012 Jeep Wrangler
  If you have a two door 2012 Jeep Wrangler then in order to install Rhino-Rack Pioneer Platform Rack you will need part # RR42111BF, part # RRRJKB2, and part # RRRLCP39. If you have a four door 2012 Jeep Wrangler then in order to install Rhino-Rack Pioneer Platform Rack you will need part # RR42108BF, part # RRRJKB1, and part # RRRLCP38. The largest platform rack you can install on a two door is 52" long x 56" wide and the largest platform rack you can install on a four door is 72" long...
  view full answer...
• Thickness of Internal Support Bars on Rhino-Rack Backbone Mounting System # RRRJKB1
  The internal base and vertical bars for the Rhino-Rack Backbone Roof Rack Mounting System # RRRJKB1 are steel L-shaped bars. I went out to our warehouse with a digital caliper and measured the actual thickness of each bar to be right at 0.124 inch. They measure 1-1/8 inch x 1-1/8 inch. I have attached a detailed installation video that you can check out as well.
  view full answer...
• Can I Use 65" Long Crossbars on my Rhino Rack Backbone System on 2013 Jeep JKU Hardtop
  I recommend just swapping out to some longer bars like the 65" long # RRVA165B-2, which will work with the # RRRLT600 legs and the Backbone system # RRRJKB1. You could reasonably use any Rhino Rack vortex aero crossbars on this setup as long as they were long enough. There is also a 71" long bar with the # RRVA180B-2.
  view full answer...
• Will Thule Hullavator Fit Rhino Rack Roof Rack that Fits 2012 Jeep Wrangler Unlimited
  Yes the Thule Hullavator part # TH898 is a fit for the Rhino Rack aero bar roof rack you have on your 2012 Jeep Wrangler Unlimited part numbers # RRVA150B-2, # RRRLT600, # RRRJKB1, and # RRQMFK06.
  view full answer...
• Recommended BackBone Mounting System for a 2012 Jeep Wrangler
  There is a backbone system for the 2012 Jeep Wrangler Rubicon. It is the Rhino-Rack Backbone Mounting System item # RRRJKB2 for the 2-door models or item # RRRJKB1 for 4-door. If you want to attach crossbars you will need the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2 item # RRVA150B-2 Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - Qty 4 item # RRRLT600 Rubber Bases for Rhino-Rack RRRLT600 Quick Mount Legs - Qty 4 item # RRQMFK06
  view full answer...
• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• Weight Rating for the Rhino-Rack Gutter Mount Roof Rack on a 2022 Jeep Wrangler Unlimited
  You are correct, the Rhino-Rack SG Roof Rack for Rain Gutters with Vortex Aero Crossbars, # RRSG59 that you linked to is 88 lbs. But don't worry, we have other options. I suggest you consider the Rhino-Rack Backbone roof rack system that starts with the, Backbone System, # RRRJLB1 using Rubber Bases, # RRQMFK06, Spacer Blocks, # RRQMHD05-2 and Quick Mount Legs, # RRRLT600 along with 59" HD Crossbars, # RB1500B-2. This will provide you a heavier rating of 175 lbs. however, please check...
  view full answer...
  
• What is the Weight Rating of the Rhino-Rack Gutter Mount Roof Rack on a 2022 Jeep Wrangler Unlimited
  The weight rating for the gutter mount system from Rhino-Rack is really 88 lbs for your 2022 Jeep Wrangler Unlimited with the hard top. Since there are many other options out there with a higher rating I recommend going a different direction. For your application I recommend the Rhino-Rack Backbone roof rack system which consists of the following: 59" HD Crossbars - # RB1500B-2 Quick Mount Legs - # RRRLT600 Backbone System - # RRRJLB1 Rubber Bases - # RRQMFK06 Spacer Blocks - # RRQMHD05-2 This...
  view full answer...
  
• What Backbone System Works w/ a 2023 Jeep Wrangler 4xe?
  There are tons of options for Jeep's so I would be happy to point you in the right direction. The correct back bone system with a pioneer platform for your 2023 Jeep Wrangler 4xe hard top is the item # JB0893 you were looking at. The Rhino-Rack Pioneer Platform Rack with Backbone Mounting System item # JB0893 measures 72" long x 56" wide. It has a 264 lbs capacity and weighs 94 lbs. If you are wanting a back bone system that mounts traditional crossbars you will need the following...
  view full answer...
• Comparison of Rhino-Rack Heavy-Duty and Rhino-Rack Vortex Aero Roof Racks
  The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets # RRRCB-RSHB-RJHB as an example. That's the purpose of the name, and the advantage of the rack. This rack is made up of the following parts: Rhino-Rack Heavy-Duty Roof Rack Crossbars: # RB1375 Qty 2 Rhino-Rack Quick Mount Legs: # RRRLT600 Qty 4 Roof Rack Leg Spacer Blocks: # RRQMHD05-2 Qty...
  view full answer...
• Will Rhino-Rack Roof Rack Fit 2006 Jeep Wrangler Rubicon
  The Rhino-Rack Roof Rack Legs # RL150S2 are designed to fit factory rain gutters on certain models of the Jeep Cherokee and Liberty. Unfortunately, there is not a rain gutter mount for your Rubicon. If you want to add the Rhino-Rack square bars shown with these legs to your 2006 Jeep Wrangler Rubicon you will need the following: -Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500B-2 -Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 -Rhino-Rack RT-Style Roof Rack Tracks...
  view full answer...
• Will a Paddleboard Fit a Rhino-Rack Roof Rack on a 2015 Jeep Wrangler with a Hard Top
  Rhino-Rack SG Roof Rack # RRSG60 for rain gutters has a capacity of 88 pounds so provided that your 11 foot paddleboard is under 88 pounds then it can support the board. However, this roof rack has a narrow bar spread of 19 inches from the center of one bar to the center of the other bar meaning you would need to make certain that the board is tied down at the bow and stern and placed so that the weight is evenly distributed to both bars. Also since the crossbars are basically positioned...
  view full answer...
• Front & Back Hitches With Accessories For Ultimate Mercedez-Benz Sprinter Van 3500
  The Swagman Skaha 2 Plus Bike Rack with Cargo Carrier # S69SR is definitely the move for you, but if you plan on putting it in the front of your 2017 Mercedes-Benz Sprinter 3500, you'll need a front hitch # 306-X7352. For the back if you have a factory step bumper you'll need this hitch # 75601 and if you have a Standard bumper you'll need this one # 75549. In order to use the Yakima EXO Swing Away Enclosed Cargo Carrier # Y62VR you'll need a class III hitch or higher. If you wanted to...
  view full answer...
• Can I Upgrade To 71" Rhino-Rack Heavy Duty Crossbars Instead Of 59" Crossbars On 2012 Jeep Wrangler?
  For your 2012 Jeep Wrangler Unlimited with hard top, Rhino-Rack recommends using Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" # RB1500B-2 along with Legs # RRRLT600, Backbone Mounting System # RRRJKB1, and Leg Spacers # RRQMHD05-2. While Rhino-Rack does not suggest using the 71" Heavy-Duty Crossbars # RB1800B-2 that you were looking at, you can certainly use them as long as they are not longer than the widest point of your vehicle which is usually the mirrors. My research tells...
  view full answer...
• Can Tracks of Rhino-Rack # Y02-490B Be Cut To Desired Length?
  The Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 54" Long # Y02-480B can in theory be used on your 2010 Jeep JKU Wrangler hard top but it is not a confirmed fit. The tracks can be cut to your desired length. Because this system is not a confirmed fit, the rated capacity will most likely be more similar to the 99 lbs of the similar Rhino-Rack Track fit confirmed for your vehicle. That rack consists of # RB1500B-2, # RRRLT600, # RTC12JWMY11,and # RRQMHD05-2.
  view full answer...
• What Heavy-Duty Crossbar Setup do You Recommend for My 2018 Jeep Wrangler Unlimited with Hard Top?
  For mounting a heavy duty crossbar setup on your 2018 Jeep Wrangler Unlimited JK, I recommend the following components: - Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" # RB1500B-2 - Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600 - Rhino-Rack Backbone Roof Rack Mounting System # RRRJLB1 - Rubber Bases for Rhino-Rack RRRLT600 Quick Mount Legs # RRQMFK06 - Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars - 5 mm Thick...
  view full answer...
• Recommended Rhino-Rack Roof Rack For a 2017 Mercedes-Benz Sprinter 2500 With Factory Side Rails
  For your 2017 Mercedes-Benz Sprinter 2500 with the factory rails I recommend the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1800B-2 with Rhino-Rack Quick Mount Legs # RRRLT600, Quick Mount Nuts # RRQMFK11-2 and Roof Rack Leg Spacer Blocks # RRQMHD05-2. You will need to replace the channel nuts that come on the legs for the larger M6 30 mm x 25 mm x 5 mm Zinc Nuts # RR96TB. The Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT only uses 65" long crossbars and the only recommended...
  view full answer...
• What Parts Do I Need To Install Rhino-Rack Roof Rack On 2020 Mercedes Benz Sprinter 2500 High Roof?
  Since your 2020 Mercedes-Benz Sprinter 2500 High Roof has factory roof rails running front to back then you can go with the Rhino-Rack Vortex Aero Crossbars or the Rhino-Rack Heavy Duty Square Bars. For the aero bars you need Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 71" Long # RRVA180B-2, Legs # RRRLT600, and Nuts # RRQMFK11-2. For the heavy duty square bars you need Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 71" Long # RB1800, Legs # RRRLT600, Nuts # RRQMFK11-2,...
  view full answer...
• Lockable Roof Rack and Snowboard Carrier for 2016 Jeep Wrangler Unlimited
  The Rhino-Rack Roof Rack # RRSG59 mentioned in your question for your 2016 Jeep Wrangler Unlimited is not compatible with any key lock system. However, they do have built-in security hardware because the legs can only be loosened by the special tool that comes with the roof rack. This roof rack has a weight capacity of 88 pounds, though you will want to check your vehicle owner's manual for its roof weight capacity. If you would like a roof rack that can be locked to your Jeep with a...
  view full answer...
• Recommended Roof Rack Compatible with 2007 Jeep Wrangler JK with Hard Top
  The # Y02-490B is not a fit for your Jeep. Instead you will want the following for the similar system: Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long # RB1500B-2 Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JWMY11 Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars # RRQMHD05-2 An alternative option to consider is the Rhino-Rack SG Roof Rack for Rain Gutters - Vortex Aero Crossbars - Aluminum -...
  view full answer...
• Is Drilling Required to Install Rhino-Rack Roof Rack on 2015 Ford Transit Connect Long Wheelbase
  I'm not 100 percent certain what you mean by "threaded sleeves" but if your have a 2015 Ford Transit Connect with a long wheelbase, you will need to drill holes in your roof in order to attach the Rhino-Rack RT-Style Roof Rack Tracks # RRRTS547, which is what you will mount the rest of the roof rack system to; there are no threaded holes with which to install this rack. Once the tracks are in place you will complete the installation by adding the Roof Rack Leg Spacer Blocks # RRQMHD05-2,...
  view full answer...
  

Do you have a question about this Roof Rack?