Replacement Crossbars for Yakima Rack and Roll Trailer

Question

Question:

Im looking to replace the round bars on my Yakima Rack and Roll trailer. The bars that come with the trailer on track mounts, so I figured I can easily replace them with other track mount bars. Is there any reason I could not use these in place of what came with the trailer?

asked by: Don

0

Expert Reply:

Hey Don, so the round crossbars of a Yakima Rack and Roll trailer are the standard Yakima crossbars without a track that runs underneath so for replacements you would want the part # Y00411 for 78 inch bars or part # Y00410 for 66 inch.

expert reply by: Jameson C

0

Don

7/2/2024

Hey Jameson! Thanks for the response. I should have phrased my question better. I don't like the round bars that come with the Yakima, I want to upgrade my trailer to heavier duty bars that have track mounts on them. Thought these bars might serve that purpose and wanted to make sure that there would be no issues with using them on my trailer.

Jameson C.

7/2/2024

@Don Ah I see what you mean now. I wish I could verify that the Rhino Rack HD bars would work for you or that there was a different top channel crossbar that would work on the Rack and Roll trailer but at this time we don't have anything.

Answer 1

The 78 inch Yakima Rack n Roll trailer #Y08107 is actually wider overall than its 66 inch counterpart, #Y08106. So it is not just the crossbars. Because the price difference between the 2 is minimal it would be more beneficial to just go with the 78…

view full answer...

Answer 2

I have another option for you but unfortunately the Yakima Rack and Roll Trailer #Y08107 cannot accept any other style of crossbar, as it was only designed to use the round Yakima crossbars. Instead I recommend the Yakima EasyRider Double Decker…

view full answer...

Answer 3

Most states require the Yakima Rack and Roll Trailer, #Y08106, to be registered, but it registers just like a regular trailer. We provide you with a Manufacturing Certificate of Origin and a VIN number. Take the paperwork provided to your Department…

view full answer...

Answer 4

Yes, the Malone MicroSport Trailer for 2 Fat Bikes and 2 Kayaks #MPG461KB will have the Certificate of Manufacture included from Malone. If for any reason you are unable to locate this document in the paperwork, please contact our customer service…

view full answer...

Answer 5

They certainly do. The Malone #MAL73FR EcoLight Sport Trailer will include a certificate of origin which you can present to your local DMV for licensing/registration purposes. I've linked to a product demonstration video for the Malone #MAL73FR…

view full answer...

Answer 6

The first step I would take is to check the vehicle side and trailer side connectors for any corrosion or dirt build up that could cause a bad connection and clean it out. If the connectors look clean, then you should use a circuit tester, #PTW2993,…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Replacement Crossbars for Yakima Rack and Roll Trailer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching