bing tracking image
  1. Trailer Hitch Ball Mount
  2. B and W
  3. Fits 2 Inch Hitch
  4. Adjustable Ball Mount
  5. Drop - 5 Inch
  6. Rise - 5 Inch
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black

B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black

Item # BWTS10038B
Retail:$345.39
Our Price: $269.00
You Save: $76.39
Trailer Hitch Ball Mount
Shipping Weight: 28 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Easily stow the ball and mounting platform on this heavy-duty, dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball or 7,500 lbs with the 2" ball. Great Prices for the best trailer hitch ball mount from B and W. B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black part number BWTS10038B can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (3735)
  • Q & A (0)
  • Photos

B and W Trailer Hitch Ball Mount - BWTS10038B

  • Fits 2 Inch Hitch
  • Adjustable Ball Mount
  • Drop - 5 Inch
  • Rise - 5 Inch
  • 1-7/8 Inch Ball
  • 2 Inch Ball
  • Two Balls
  • 7500 lbs GTW
  • Class IV
  • B and W
  • Steel Shank - Matte Black
  • Steel Ball

Easily stow the ball and mounting platform on this heavy-duty, dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball or 7,500 lbs with the 2" ball.


Features:

  • Ball mount with built-in hitch balls lets you hook up your trailer to your tow vehicle
    • Shank slides into hitch receiver
    • Ball provides connection point for trailer coupler
  • Stowable design lets you store ball and mounting platform underneath your vehicle
    • Remove pins holding ball mount platform in place on shank
    • Flip platform underneath the hitch
    • Reinsert pins and clips to secure ball mount platform for travel
  • Adjustable height lets you tow trailers of different heights with the same vehicle
    • Slide ball mount up or down along shank and secure in place with included pins and clips
  • Anti-theft design ensures ball mount platform can't be removed when Tow & Stow is installed in hitch
    • No additional locks required to prevent platform and balls from being removed
  • 2 Different-size hitch balls let you tow trailers with different coupler sizes
    • To switch ball, simply remove pin, rotate balls, and reinsert pin
  • Dual-process chrome plating on balls provides excellent rust resistance
  • Black powder coated shank is corrosion resistant
  • Stainless steel pins create sturdy, rust-resistant connections
  • Durable steel construction with high yield tubing offers superior strength
  • Hitch pin and clip or hitch lock sold separately
  • Made in the USA


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Gross towing weight:
    • When used with 1-7/8" ball: 3,500 lbs
    • When used with 2" ball: 7,500 lbs
  • Distance from center of hitch pin hole to center of hitch ball:
    • Hitch pin hole closest to ball: 9-1/4"
    • Hitch pin hole farthest from ball: 10-3/8"
  • Distance from center of hitch pin hole to pin hole in mounting block:
    • Pin hole closest to mounting block: 3-3/4"
    • Pin hole farthest from mounting block: 4-7/8"
  • Maximum drop: 5"
  • Maximum rise: 5-1/2"
  • Incremental height adjustment: 1"
  • Limited lifetime warranty


An illustration shows the eleven inch clearance level needed between the ground and B and W Tow and Stow hitch.

Note: To avoid the Tow & Stow hitting steep driveways or curbs, we recommend at least 11" of clearance between the ground and the lowest point of the drop hitch, as seen above.


The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having both a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers.


Easily Adjusts and Stows

B&W Tow & Stow Ball Mount Operation

To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top. Then replace the pin to secure the block in place.


Adjusting the height of the ball is just as easy. Remove the pins holding the ball mount platform in place and slide the platform up or down along the shank to the desired position. Once you have found the correct height, reinsert the pins and replace the clips.


When you're not towing, you can flip the ball mount platform around and stow it beneath your hitch so that you won't bang your shins. Just remove the pins to slide the ball platform down along the channel and up the back side so that the hitch balls face towards your vehicle. Then replace the pins.


Built-In Anti-Theft System

The Tow & Stow ball mount features a channel that runs along both sides of the shank. This channel not only allows you to slide the ball mount platform up and down to adjust the ball height, but it also prevents removal of the platform when the ball mount is installed, which will help prevent theft of your trailer.


Single Dimensions

A slot is cut into the adjustment channel near the top of the shank. To remove the ball mount platform from the shank you will need to remove the entire ball mount from your hitch. Then remove the pins that hold the platform in place. Flip the platform around to the stowed position on the rear of the shank, and then slide it up until the center pin lines up with the slot in the shank. Pull the platform out towards the rear of the shank until the pin pops out of the adjustment channel.


When the Tow & Stow is secured in your hitch receiver, you will not be able to remove the ball mount platform. This is because the slot in the shank is positioned in such a way that the collar on your hitch will block the pin on the platform from being able to leave the channel. Even if the pins holding the ball mount platform in place are removed, the platform will still be confined to this channel. So, as long as a hitch lock is used to secure the entire ball mount in your hitch receiver, and a coupler lock is used to prevent your trailer's coupler from being disengaged from the ball, your trailer will be secure.


How to Measure Drop on Adjustable Ball Mount


TS10038B B and W Stow and Tow Dual Ball Mount - Model 8 - 1-7/8" Ball and 2" Ball - Black




California residents: click here


Customer Satisfaction Score:


Customer Reviews

B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black - BWTS10038B

Average Customer Rating:  4.9 out of 5 stars   (3732 Customer Reviews)

Easily stow the ball and mounting platform on this heavy-duty, dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball or 7,500 lbs with the 2" ball.

by:

Very nice and sturdy made Hitch. I love the streamlined design. Fast shipping



by:

Great tow hitch. Love the way it stores away in hitch and do not have to remove it.

Be careful when moving from storing to pull position, it can easily pinch your fingers



by:

Couldn't be happier with my new hitch. Excellent quality, exactly as advertised. The video explaining the characteristics and operation of the hitch was extremely helpful and answered all my concerns. I now only need one hitch for all 5 of my trailers. This was my 2nd purchase from etrailer and I highly recommend them.


Brad R.

1/20/2018

After 1 year I couldn’t be happier with my ball hitch. I recommend this hitch to anyone that pulls multiple trailers.



by:

This product is the best hitch I ever owned. It has never let me down. So versatile and easy to use. Also, I like to add the customer service from etrailer is great, friendly, knowledgeable and very helpful. I highly recommend etailer to any folks out there that are looking for the best product and company to buy from hands down.



by:

excellent product ball is showing signs of surface rust after going threw one winter not to bad. love the adjustibility of it. On my 07 silverado with factory receiver it is possible to still remove the ball on the back slot



by:

Good price, quick shipping, fits great!



by:

Well built. Can be flipped so you don't bust your shin. Will last longer than the truck. Made in America.



by:

The stow & go hitch is very well made with good material. It is the first B&W hitch I have ever used and I just love it. It is easy to adjust and solid when hooked up.



by:

Easy install, works as advertised, stows quickly and easily.

Charles C.

8/26/2022

No issues, best hitch I have ever owned, quality product.



by:

B&W makes a top of the line product, this is the third B&W I have owned. I wouldn’t settle for anything less. Well worth the money. Very versatile, does everything I need it to. I have two boats, the transition is effortless depending on what we are doing at the lake I hope it will be the last one I own. Thanks



by:

Works great! The best hitch I've ever o wned.



by:

Best hitch ,fast shipping and excellent service



by:

Easy ordering . Fast free delivery!



by:

These items were purchased to upgrade our boat trailer and tow vehicles at work. Everything was perfect and functions as planned. Very pleased.



by:

Love B&W hitches



by:

Solid, high quality product and easy to use.



by:

Bought this for my husband. He LOVES it! Constructed well, easy to operate. Great product

Michele

4/16/2019

We love the hitch!



by:

Awesome hitch.

Greg

4/10/2022

Works flawlessly. Easy to adjust and tuck out of the way without removing from the truck.



by:

Really good quality and design. Works as advertised and looks great on the truck.



by:

Simple. Super rugged. I really like the fold and stow component. I thought it kind of gimmicky when looking at it on line. Now that I see it on the truck, what a bonus.



by:

Love the adjustability, very nice produ ct.



by:

Awesome



by:

Awesome hitch!!



by:



by: 12/16/2023


25
3538
Show More Reviews

See what our Experts say about this B and W Trailer Hitch Ball Mount

  • Choosing a Ball Mount to Tow Multiple Trailers with a 2018 Volkswagen Atlas
    In order to find the correct ball mount you need to know the size of the trailer hitch receiver on your 2018 Volkswagen Atlas and the correct rise or drop you need for each trailer. From my research the Atlas's factory hitch is a 2 inch Class III receiver. To find the rise or drop you need with each trailer park the Atlas on level ground and measure from the ground to the top of inside the receiver's opening. Then park each trailer on level ground and measure from the ground to the bottom...
    view full answer...
  • Ground Clearance Requirements for my 2021 GMC Yukon
    There is not a rule on how much clearance you need. It really comes down to the terrain you are driving over. For general use however having 10-11 inches of clearance will be sufficient when using the B&W Tow & Stow 2-Ball Mount part # BWTS10038B. There are several vehicles on the market where their hitches sit within 7 or 8 inches of the ground with out issues.
    view full answer...
  • Is the B&W Tow & Stow Available With 1-7/8 Inch and 2 Inch Hitch Balls?
    There are a pair of B&W Tow & Stow ball mounts which have both a 1-7/8 inch and 2 inch hitch ball. The # BWTS10038B has a maximum 5 inch drop or 5-1/2 inch rise while the # BWTS10035B will give you a maximum of 3 inches of drop or 3-1/2 inches of rise. Each of the ball mounts fit 2 inch receivers and allow up to a 3,500 lb towing capacity with the 1-7/8 inch ball or 7,500 lbs with the 2 inch ball. I've added links to video reviews of each product for you to take a look at.
    view full answer...
  • Ball Mount Recommendation for 2006 Ford F-150 to Cover Basically All Trailers
    The B and W Tow N Stow Ball Mount part # BWTS10038B that you referenced would be what I would recommend. This comes with the two more popular ball sizes of 2 inch and 1-7/8 inch which are more common on lighter duty trailers and has ability to do up to a 5 inch drop. If you wanted maximum flexibility though we have a three ball version of this with the part # BWTS10048B which also includes the 2-5/16 inch ball size. This would cover everything and would be a really solid option too.
    view full answer...
  • Recommended Trailer Hitch Receiver And Towing Components For 2016 Ford Edge Titanium
    Installing the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75234 on your 2016 Ford Edge Titanium should not void your warranty even if you are removing the heat shield. There is enough air flow that there are not any safety concerns leaving this heat shield off. Trimming and replacing or removing is a preference. If you will be towing with this receiver, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118677. This custom-fit...
    view full answer...
  • Trailer Hitch Compatability Between Years Of Kia Sportage Between 2010 And 2011 Model Years
    A 2010 Kia Sportage trailer hitch receiver will not fit a 2011 Kia Sportage. There was a change in the design between those model years. For a 2011 Kia Sportage, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75717 for all models. These hitches have a square tube design along with a black powder coat finish over an e-coat base for superior rust protection. If you'll be towing I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat...
    view full answer...
  • Recommended Ball Mount for Level Trailer Towing with 2014 Honda Pilot
    If you have a 2 inch receiver on your 2014 Honda Pilot, then I recommend the B&W Tow & Stow 2-Ball Mount # BWTS10038B. This ball mount has a 2 inch and a 2-5/16 inch hitch ball and is adjustable up to 10-1/2 inches total to ensure the proper fit for your trailer. You can use the mount either in the drop position which is most likely what you need, or you can invert it and put it in the rise position. The really nice aspect of this mount is not only the precision height adjustment to...
    view full answer...
  • Recommended Trailer Hitch Receiver For 2017 Honda CR-V
    A Class III trailer hitch receiver is almost always a better option for vehicles that have the capacity for them. Your 2017 Honda CR-V has the option, so I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76128. This is a sturdy round tube design with black powder coat over an e-coat base for excellent rust protection. For your vehicle trailer wiring, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118741....
    view full answer...
  • Correct Trailer Hitch Receiver and Other Parts Needed to Tow a Trailer With a 1991 Dodge 150
    I confirmed with Draw-Tite that their trailer hitch receiver # 75038 will fit your 1991 Dodge 150. This is a Class III, 2 inch receiver that does require drilling for installation. I've linked a video of the hitch being installed onto a Ford but the process will be the same. Also if you need a wiring harness # C55317 is the correct harness. This will provide a 4-way trailer connector on the back of your truck. You'll also need a ball mount and hitch ball if you don't already have...
    view full answer...
  • Availability of 2-Inch Ball Mount with 6-Inches of Drop and 7500-lb Capacity
    For a 2-inch fixed ball mount with 6-inches of drop you can check out the linked page which shows you five such items. None comes with a pre-installed hitch ball. For a 2-inch ball rated for 7500-lbs you can use part # 63845. You may instead be able to use an adjustable ball mount like # BWTS10038B from B&W, which offers adjustable height from 5-1/2-inches of rise down to 5-inches of drop. It features two included hitch balls, a 1-7/8-inch rated for 3500-lbs and a 2-inch rated for 7500....
    view full answer...
  • Trailer Wiring Kit Recommendation for a 2022 Dodge Durango
    I recommend going with the T-One # 118617 wiring because it has the highest amp rating for wiring on your 2022 Dodge Durango plus we have found the Tekonsha wiring to be the most reliable. You can mount this wiring right next to your receiver for easy access using the brackets # 18144 and # 18140. If you don't already have a ball mount for towing a trailer I recommend checking out the B&W Tow & Stow # BWTS10038B which comes with the smaller 1-7/8" and 2" hitch balls that will fit your...
    view full answer...
  • Recommended Trailer Hitch Receiver For 2013 Ford Taurus Police Interceptor
    For your 2013 Ford Taurus Police Interceptor, the Curt Trailer Hitch Receiver Class III - 2" 13552 is not a fit. For a confirmed fit, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver Class III - 2" # 75670. This will give you a 2 inch trailer hitch receiver on your police interceptor. I have attached a video to help. There is not a Curt brand hitch confirmed to fit, but Draw-Tite will. If you will be towing with this trailer hitch receiver, I recommend the Vehicle Wiring...
    view full answer...
  • Recommended Trailer Hitch Receiver For 2016 Jeep Rubicon Hard Rock Edition
    My Curt representative tells me that according to the information they have, the # 13432 will fit your Hard Rock 2016 Jeep Wrangler Rubicon. This fit to the frame and not the bumper so it will not interfere. Since you already have the wiring harness, you will just need a ball mount to start towing with this hitch. For a ball mount, I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black # BWTS10038B. This will give you an adjustable hitch to tow...
    view full answer...
  • Recommended Adjustable Receiver Hitch for 2010 Toyota RAV4
    I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch # BWTS10038B. It is an adjustable steel hitch that allows you adjustability with a range of 5" of drop to 5-1/2" of rise. It also gives you a 1-7/8" or 2" ball to choose from for different trailers. Best of all the hitch can be flipped around for convenient storage and is backed by a Limited Lifetime Waranty. I also recommend getting the InfiniteRule Locking Pin Set # 34061775-D. This set allows you to lock up every aspect of this...
    view full answer...
  • Mounting Hardware to Install Trailer Hitch Receiver on 2007 Nissan Quest
    Even if you had the hardware you would not want to reuse it on a hitch. The replacement hardware kit you need is # RHK. You'll need to in put the model number of the hitch receiver you have and then choose the manufacturer from the drop down. This way you'll get the exact hardware that was included with the hitch originally. For your 2007 Nissan Quest the Curt # C13563 is confirmed to fit. If you're going to be towing with your Quest you'll also need a wiring harness. The Tekonsha...
    view full answer...
  • How Will I Know What Size Ball Mount Receiver I Need Without Having A Trailer Yet?
    Looking at the different trailer hitch receivers that we offer I see that most will have a hitch height of 12-16" on the 2008 Honda Odyssey. We do list the heights of the receivers in our installation videos. If you do not yet have a receiver I recommend our etrailer Trailer Hitch Receiver # e98862. This receiver will have a height of 14" and a 2" receiver. The 2" receiver is great because it will give you more ball mount options as well as hitch accessories. Most 5'x8' trailers will...
    view full answer...
  • Height Adjustable 2 Ball Hitch With 1-7/8 and 2 Balls Available in Black
    We have the B&W Tow & Stow 2-Ball Mount # BWTS10038B. This adjustable ball mount can have a drop as much as 5" or a rise to 5-1/2". It has a 1-7/8" ball with a 3,500lb capacity and a 2" ball with a 7,500lb capacity. It is also has a matte black finish like what you are looking for. I do recommend using the InfiniteRule Locking Pins # 34061775-D to secure the entire assembly to your vehicle. These 4 locking pins are keyed alike and designed specifically to be used with the B&W Tow & Stow...
    view full answer...
  • Adjustable Ball Mount For A 2014 Mercedes Benz GLK
    To get your ball to the height you are wanting on your 2014 Mercedes Benz GLK I recommend using an adjustable mount. I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black Item # BWTS10038B. It provides a 1-7/8" ball and a 2" ball for different trailer couplers and fits 2" receivers. It is going to provide a 5-1/2" rise so it is going to provide the adjustability you are looking for. I recommend making sure the trailer doesn't exceed the weight capacity...
    view full answer...
  • Trailer Hitch Recommendation for 2014 Mercedes GL 450
    The Curt Trailer Hitch Receiver # C13190 is a confirmed fit for your 2014 Mercedes-Benz GL 450 as long as you don't have the Active Curve System on your 4matic. It is a bolt on installation with complete hardware kit and instructions included. The Active Curve System is a sophisticated leveraging action of the car's suspension that reduces leans in turns by allowing all four wheels to work independently ensuring they are on the ground at the same time. They system uses electrohydraulic...
    view full answer...
  • Recommended Trailer Hitch Receiver For 2016 Hyundai Santa Fe Sport
    The trailer hitch receiver from your 2007 Ford Taurus Sedan will not fit a 2016 Hyundai Santa Fe Sport. For your Santa Fe Sport, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75772. This hitch will give you more options than the 1-1/4 inch hitch receiver on your Taurus, but most 1-1/4 inch accessories can easily work with a larger hitch without losing functionality using a reducer (adapter) like # HT02. If you will be towing with this hitch,...
    view full answer...
  • Recommended 2 Inch Class III Trailer Hitch Receiver For 2017 Chevy Equinox With Factory Tow Package
    For your 2017 Chevy Equinox V6 with factory tow package, I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Class III - 2" # e98865. This hitch will bolt directly to your frame and bumper support brace. I've attached a video to help. The factory hitch will simply be changed out. Since we are changing the hitch receiver opening, I recommend getting a ball mount to match. I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black # BWTS10038B...
    view full answer...
  • Recommended Trailer Hitch Receiver And Towing Accessories For 2017 Subaru Outback
    For your 2017 Subaru Outback, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75673. This will allow you to utilize your manufacturer's towing capacity rating of 2,700 lbs just as a Class II option, but this receiver will give you more options as far as accessories and will be a sturdier hitch than a Class II. It is not a necessity to use the Class III hitch over the Class II for towing a riding lawn mower or 4-wheeler, but it will be a more...
    view full answer...
  • Recommended Trailer Hitch Receiver For 1998 Chevy S10 Sportside With Roll Pan Bumper
    We have a hitch that will fit your 1998 Chevy S-10 Sportside with Roll pan bumper. It is the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75085. If you will be towing with this receiver, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118359. This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located at the rear, along the inside of the driver's side frame rail. I've attached an installation...
    view full answer...
  • Towing Capability And Recommended Towing Equipment For 2014 Honda CRV
    The vehicle manufacturer's towing capacity is what you want to go by not the capacity of the individual parts that can be rated higher. The manufacturer will give you a towing capacity as well as a tongue weight capacity in most cases. I looked up the owners manual for a 2014 Honda CRV and the manual states the maximum allowable weight of the trailer, cargo and everything in or on it must not exceed 1500 lbs. The tongue weight of the fully loaded trailer should be approximately 10%...
    view full answer...

Do you have a question about this Trailer Hitch Ball Mount?


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Mike S
Updated by:
Mike S
Employee Noah M
Updated by:
Noah M
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.