Rhino-Rack Heavy Duty Roof Rack with Backbone Mounting System - Aluminum - Silver - Qty 2

See what our Experts say about this Rhino Rack Roof Rack

• Recommendations To Be Able To Carry Cargo On 2014 Nissan Pathfinder With Naked Roof
  We do not have a roof rack available for the 2014 Nissan Pathfinder with no factory side rails. I checked with Yakima and Thule and Rhino Rack and there is no roof rack compatible with the roof. If you are interested in carrying bikes or cargo let me know and I can make some recommendations that will work for you.
  view full answer...
• Cross Bars for 2021 Jeep Rubicon With Sky One Touch Top
  Yes, we have something for this, I suggest the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 59" # RB1500, and the 8" Tall Gutter Feet, # RL210S2 or event the # RL280S4-2. These roof-rack legs are designed to mount on your vehicle's factory rain gutters and mount with included brackets and hardware, no drilling required. With that set-up you can then use the Rhino-Rack 2 Kayak Carrier w/ Tie-Downs, a J-Style - Folding - Side Loading type carrier, # S512-S512X. Or, my preferred,...
  view full answer...
• Will the Rhino-Rack Heavy-Duty Roof Rack Fit 2015 Ram 1500 Crew Cab with Sunroof
  Yes, the Rhino-Rack Heavy-Duty Roof Rack, which consists of parts # RB1500, # RRRLKHD, and # DK043, will fit your 2015 Ram 1500 crew cab with a sunroof. Placement of the crossbars is very specific and I have included an attachment which illustrates the measurements for your Ram, as well as the measurement process. With these measurements you will be able to determine exactly where the crossbars will sit in comparison to your sunroof.
  view full answer...
  
• Recommended Heavy Duty Roof Rack for 2016 Ford F-150
  I may have a solution for you, however I don't recommend trimming the Rhino-Rack RT-Style Roof Rack Tracks like the 58 Inch # RRRTV148 that you referenced. These strips do feature pre-cut holes for the rivets so trimming any portion of the units will essentially change the way they are meant to attach. You would also need to make sure that the cuts are perfectly straight up and down so the end caps will fit properly. We do have shorter lengths available, such as the 36-1/4 inch # RRRTS540,...
  view full answer...
• Dual Kayak Carrier For 2017 Ram 1500 With Tonneau Cover
  I would recommend getting the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500, the Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK043. I've included a video to help you install if you wanted to go that route. Then the most cost effective carrier would be four of the Malone Rack Pads # MPG314, two per crossbar. The foam pads will be less rough on your kayaks whenever you're going down gravel roads....
  view full answer...
• How Was Rhino Rack Roof Rack Spread for 2014 Chevy Silverado 1500 Decided
  Roof rack companies like Rhino Rack pick the required spread for their roof racks like the # RB1500, # RRRLKHD, and # DK377 based on where the roof is reinforced the best. We have to recommend you always go with the required spread, otherwise you could potentially damage the roof of your vehicle or the rack may not secure properly. Even though the spread is narrower than you'd like (most racks are right at this same spread) you can still use a canoe carrier like the Yakim KeelOver # Y04069...
  view full answer...
• Will a Paddleboard Fit a Rhino-Rack Roof Rack on a 2015 Jeep Wrangler with a Hard Top
  Rhino-Rack SG Roof Rack # RRSG60 for rain gutters has a capacity of 88 pounds so provided that your 11 foot paddleboard is under 88 pounds then it can support the board. However, this roof rack has a narrow bar spread of 19 inches from the center of one bar to the center of the other bar meaning you would need to make certain that the board is tied down at the bow and stern and placed so that the weight is evenly distributed to both bars. Also since the crossbars are basically positioned...
  view full answer...
• What HD Crossbars Can I Use to Mount an Awning on Rhino-Rack Tracks?
  I have a crossbar solution for you. Unfortunately, Yakima HD Crossbars like the # Y01157 have no way of attaching to Rhino-Rack tracks like the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 50" Long # RRRTV128. However, we do have another option for installing HD bars on Rhino-Rack tracks. For that route, I recommend the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 59" Long # RB1500 along with the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack...
  view full answer...
• Use of Rhino-Rack Heavy Duty Crossbars on a 2021 Toyota Sienna with Bare Roof
  While we do have a great roof rack option for your 2021 Toyota Sienna, I confirmed with Rhino-Rack that the Heavy-Duty Crossbars # RB1500 do not fit your naked roof. This is because Rhino-Rack has not engineered legs and a fit kit that works with your bare roof. The absolute best and only option for mounting crossbars on your roof is the SeaSucker Monkey Bars # 298-SX6000B (48" crossbars) or # SEA99FR (60" crossbars). Since the vacuum cups of the roof rack attach directly to your bare...
  view full answer...
• Recommended Rhino-Rack Roof Rack for 2014 Ram 3500 Crew Cab Big Horn
  For a Rhino-Rack roof rack system for your 2014 Ram 3500 Crew Cab Big Horn that has the nicest OEM-like appearance I suggest the Rhino Rack # RR32GR. This rack features quieter matte black aerodynamic crossbars for less wind noise and it has a 165-lb weight capacity on your truck. If it were my truck I'd go for this rack: lower price, nicer looks and same weight capacity. Their heavy-duty rack system that you referenced, made of parts # RB1500, # RRRLKHD and # DK043, offers the same weight...
  view full answer...
• Rhino Rack HD Roof Rack that Fits 2013 Ram 3500 Crew Cab
  Yes, the Rhino Rack HD rack fits directly to your 2013 Ram 3500 crew cab with the part numbers # RB1500, # RRRLKHD, and # DK043. This rack uses included clamps to secure by clamping to the door frame of the truck which is very secure and also easy to set up without permanent modification.
  view full answer...
• Rhino-Rack HD Roof Rack Fit For 2022 Honda Ridgeline With Naked Roof
  We do indeed have the Rhino-Rack roof rack with HD crossbars that fits your 2022 Honda Ridgeline with a naked roof, and load stops as well. The correct parts for your truck are the following: - Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver # RB1500 or Black # RB1500B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit # DK470 This will give you the heavy-duty Rhino-Rack roof rack for your '22 Ridgeline, and then for load stops for these crossbars,...
  view full answer...
• Recommended Roof Rack and Kayak Carrier for 10 Foot Kayak on 2014 Ford F150 Super Crew
  The Rhino Rack # RB1500 Heavy Duty Crossbars, # RRRLKHD 2500 Series Legs and # DK150 vehicle specific clamp kit is indeed compatible with your 2014 Ford F150 Super Crew. For a kayak carrier, I'd recommend the Rhino Rack J-Style folding kayak carrier, part # S512. In order to attach the kayak carrier to the heavy duty crossbars, you'll need an adapter kit, part # KC-FK8. The kayak carrier includes straps to secure the kayak to the crossbars and two bow/stern tie downs. If you click the...
  view full answer...
• Will the Rhino-Rack HD Roof Rack Crossbars Fit My 2021 Honda Civic EX Sedan?
  I have a great alternative solution for you but unfortunately, the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver # RB1500 will not fit your 2021 Honda Civic EX Sedan. However, if you are looking for a heavy duty rack system for your vehicle, I recommend the following setup: - Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine...
  view full answer...
• Rhino-Rack Vortex Aero Roof Rack & Ski Rack Compatibility on 2016 Subaru Crosstrek
  The Rhino-Rack Vortex Aero roof rack system made of parts # RRVA118B-2 and # RRSX100 is a complete roof rack system for the 2016 Subaru Crosstrek that has factory-installed roof side rails that run from front to back. You will NOT need to use the Heavy-Duty Crossbar Adapter Kit # HD-FK1 to install their Ski Carrier # RR574 on the Vortex bars. The kit is needed only when installing the ski rack on their heavy-duty bars like # RB1500. Since the Vortex bars have a T-bolt channel in their...
  view full answer...
• What Crossbars Fit The Rhino-Rack Rain Gutter Roof Rack Legs # RR37XT?
  I have another option for you, but the Rain Gutter Legs # RR37XT you were looking at will not work with the Rhino-Rack SG Roof Rack. You will need to use either Rhino-Rack Heavy-Duty Roof Rack Crossbars like the # RB1500, or the Rhino-Rack Vortex Aero Crossbars like the # RRVA150S-3. I included videos of the products mentioned for you to take a look at.
  view full answer...
• Is the Rhino Rack Ladder Roller Compatible With the Rhino Rack Euro Crossbars
  There actually is not a load limit for the Ladder Roller for Rhino-Rack Heavy-Duty Crossbars # RR470. Rhino Rack states that you should follow the weight capacity listed in your owner's manual so that'd be 187 lbs while in motion or 771 lbs while stationary. As far as the roller being compatible, that's going to be a no. This roller is listed as a fit for Rhino Rack Heavy Duty crossbars # RB1500 which is a bit wider than the Euro bars so the two aren't going to be compatible.
  view full answer...
• Roof Rack and Surf Board Carrier Recommendation for 2014 Toyota Prius V
  For your 2014 Toyota Prius V the Rhino Rack Vortex Aero Roof Rack part numbers # RRVA126B-2, # RRRLKVA, and # DK195 is a really great option I recommend highly. With this rack you get the quieter aero bar shape, easier install, and higher quality of the nicer racks but at a better price. Then for a surfboard carrier that can carry up to three boards the Inno Board Locker part # INA744 would be a really great option as well.
  view full answer...
• Rhino-Rack Roof Rack Parts for 2017 Ram 2500 Crew Cab
  All Rhino-Rack roof rack setups for your 2017 Ram 2500 Crew Cab are shown on the linked page. You can look these over to see if any of your existing rack components match up so that you can install them on your 2017 Ram. Please note that all Rhino-Rack options for the new truck are the 59-inch length. If you happen to have 59-inch Vortex Aero bars # RRVA150B-2 or # RRVA150S-2 then all you need to mount them on the Ram are the Leg Kit # RRRLKVA and Fit Kit # DK043. If instead you have...
  view full answer...
• Aftermarket Roof Racks and Hitches for 2012 Subaru Outback Wagon
  Rhino-Rack's Heavy Duty Crossbars # RB1500 are able to handle at least the same amount of weight as the roof of any car on which they fit. However these bars are not a fit on the 2012 Outback Wagon. We do have aftermarket roof racks for the car that are designed to fit either the version with a totally bare roof or the version with raised side rails that run front-to-back. All appear on the linked page which shows these two roof configurations. Racks vary in their own weight ratings. When...
  view full answer...
• Which Rhino Rack Pioneer Platform Can Attach to Vortex Aero Crossbars
  I have a solution for you, but the Rhino Rack Pioneer Platform # RR25TB is designed to mount directly to either a Rhino Rack fit kit or Rhino Rack HD bars so you'll need a Pioneer platform that mounts to crossbars. There are 2 different sizes of the Pioneer platform that can be attached to Rhino Rack Vortex Aero bars: - Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 48" Long x 38" Wide # RR42114BF - Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum...
  view full answer...
• What Roof Rack Do You Recommend for a Camper Shell with Tracks?
  For a great roof rack system for your A.R.E. Mx truck cap, I recommend the Rhino-Rack Roof Rack for Factory Tracks - 59" # Y02-490B-NT. The Rhino-Rack Roof Rack includes 2 Vortex Aero black, elliptical crossbars that you can use to hold ladder racks, conduit cases, and other work accessories. In addition, the Rhino-Rack Roof Rack crossbars come with a 220 pound weight capacity. I recommend checking the user's manual on your camper shell to make sure it can accommodate that much weight. If...
  view full answer...
  
• Will the Rhino-Rack RLTP Legs Fit on My Retrax XR Cover on My 2018 Ford F-150?
  I have a great solution for a rack that works with the rails on your Retrax XR tonneau cover on your 2018 Ford F-150. Unfortunately, the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall # RLTP-2 will not fit the Retrax XR rails. However, Rhino-Rack does make legs that are designed to fit the Retrax XR rails. Those are the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600. Sadly, with these legs, you will not...
  view full answer...
• Can I Fit A Rhino Rack Pioneer Platform To My Retrax XR Series Tonneau Cover
  You have two options; The first option is to install the Rhino-Rack Vortex Crossbar System for Retrax XR Series Tonneau Covers - Black - 65" Long, part # RRVA165B and part # RRRLT600. The feet attach directly to the RetraxPrO XR Hard Tonneau Cover - Retractable - Aluminum - Matte Black - Accessory T-Slots, part # RTT-80852. The Vortex Aero crossbars will attach to the the legs. With this fit you will be limited to Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 48"...
  view full answer...
• Roof Rack or Ladder Rack for Trailer For Roof Top Tent
  There are a couple options to add a rack system to your trailer, depending on what type of trailer you have. For an enclosed trailer with rain gutters you can install the Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28. Another option is to use a track-mounted system from Rhino-Rack. You will need the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 50" Long # RRRTV128, Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600 and crossbars,...
  view full answer...
• What Adapter Will Fit My Retrax Tonneau Cover to Let Me Use the Yakima OverHaul HD on My 2019 Tacoma
  If you have a Retrax tonneau cover on your 2019 Toyota Tacoma (5-ft. bed) like the RetraxONE XR # RTT-60851 or the RetraxPRO XR # RTT-80851, the adapter that you need to use the Yamkima OverHaul HD # Y01151-58 is the Tonneau Cover Adapter Kit for Yakima OverHaul HD # Y01155. As far as mounting a Rhino-Rack pioneer platform on the OverHaul HD, the only platforms that will fit are the Rhino-Rack Universal Pioneer Platform Rack part # RR42114BF which is 48" long x 38" wide and part # RR42115BF...
  view full answer...
• Parts Needed To Mount A Rhino-Rack Platform To The Roof Of A Ford E-350
  Hey William, What is the year of your Ford E-350? There might be a naked roof fit kit that can fit. If not you would need to go with the Rhino-Rack RTC-Style Roof Rack Tracks - 55" Long # RTC14 and rivet it to the roof. If needed you can cut the length down from the side without the opening in the channel for accessories to better fit your roof. From there you can then install the Rhino-Rack Quick Mount Legs # RRRLT600 and some spacers blocks # RRQMHD05 to connect the platform directly...
  view full answer...
• Best Way To Carry Cargo on a 2016 Honda Odyssey
  I would love to help but none of the roof bags for a bare roof will work with a sliding rear door. Therefore, the Rightline Gear Sport 3 Rooftop Cargo Bag part # RL100S30 will not fit your 2016 Honda Odyssey unless you first install a roof rack like the Rhino-Rack Vortex Aero Crossbar System which consists of part # RRVA126B-2, part # RRQMVA10, part # RRRTV168, and part # RRRLT600. The next best option which is also more cost effective would be to install a trailer hitch like the etrailer.com...
  view full answer...
• Recommended Truck Bed Crossbar Kit for a 2024 GMC Sierra 1500
  Tony, the only way I understand you'd be able to use your Rhino-Rack bars # RR63ZE with your 2024 GMC Sierra is by installing a tonneau cover with T-slots so you can then use the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600. If you didn't want to also install a tonneau cover, then your only other option would be a new system in which you could use the Yakima BedRock HD Truck Bed Rack # Y01160-59, which would not require a tonneau cover, simply just clamps onto your...
  view full answer...
• Can Rhino Rack Sportz Aero Crossbars be Used in ARE Cap Channels
  Hey Ken, yes you can use the Rhino Rack crossbar set part # RR25AG in the tracks of your ARE cap with the feet kit part # RRRLT600 and you'd be set. What are you planning on carrying with the rack?
  view full answer...
• Can the Pioneer Platform Rack Fit the Rebel Off Road Xplor Rack?
  Hey Dave, thanks for reaching out! Your best bet is going to be a combination of the Rhino-Rack Quick Mount Legs # RRRLT600. These mount directly to the Pioneer Platform Rack and then mount to a track system using the T-Bolts that are spaced 2-5/8" apart on center (see attached). I reached out to Rebel Off Road and they suggested checking out their Tent Standoff Brackets and/or their Cross Bar Mounting System, but none of this has been tested together so I can't confirm any of this will...
  view full answer...
• Recommended Crossbars and Feet for a LEER Camper Shell with Thule Tracks
  Ok Sean, so I was able to track down some info about your LEER camper shell and it looks like you ordered it with the Thule tracks already installed. So, if that's the case, you can then use either the Thule Tracker II feet with the Thule WingBar Crossbars # TH711520, or you can use the Rhino-Rack Vortex Aero Crossbars # RRVA165B-2 with the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 for a more cost-effective non-Thule setup.
  view full answer...
• Roof Kayak Carrier Recommendation for a 2014 Honda Odyssey EX-L with Moon Roof
  Foam block carriers such as Malone Deluxe Kayak Carrier - Foam Block Style Item # MPG152 are designed as a temporary, short-distance solution to carry a kayak. On a van that has sliding side doors they wouldn't work because on a naked roof it would require running straps through the interior of the vehicle. You would instead need a roof rack for your van. I can make some recommendations if you can tell me the year, make, and model of the van.
  view full answer...
• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
  There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
  view full answer...
• Rhino-Rack Roof Rack for Truck Cap Track System
  For your truck topper with existing track system, I recommend the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 2 # RLTP along with the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 65" Long # RB1650B-2. If you prefer the vortex style bars then use Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 and # RRVA165B-2.
  view full answer...
• Will 65" Rhino-Rack Crossbars Fit RetraxPRO XR Tonneau Cover T-Slots On A Ford F-150
  Hey Zach, Rhino-Rack crossbars have an 11-3/4" mounting track on the both sides of the bottom of the crossbar. At 65" this would mean that the spacing of the t-slots in your cover would need to sit roughly 55" to 64" apart in order to fit. To mount the 65" crossbars # RRVA165B-2 in the track you'll need their quick-mount legs # RRRLT600.
  view full answer...
  
• What Mounting System Do I Need to Use for the Pioneer Platform # RR42108BF on My Leer 100XR Shell?
  I have a great platform solution for you. Unfortunately, the Rhino-Rack Pioneer Platform 72" Long x 56" Wide RR42108BF is discontinued. However, with the recommended fit of the Rhino-Rack Pioneer Platform Rack for Short Camper Shells - Backbone - 60" Long x 56" Wide # RR63ZW, you will have both the platform and the mounting hardware available for installation with the modular Backbone. The Modular Backbone is designed to fit the track on the 100XR.
  view full answer...
• Will 59" Crossbars Work on a 2003 Chevrolet TrailBlazer EXT?
  Yes, they will Justin. The 59" Rhino-Rack Vortex Aero Crossbars item # RRVA150B-2 will attach to the roof of your 2003 Chevrolet TrailBlazer EXT using the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item # RRRLT600. You are correct they are going to over hang quite a bit. The 46" Long Rhino-Rack Vortex Aero Crossbar item # RRVA118B are what's recommended for your Trailblazer. The Yakima ForkLift Roof Mounted Bike Carrier item # Y02098 will definitely work with Rhino-Rack crossbars....
  view full answer...
• Length of Rhino-Rack RT-Style Roof Rack Tracks RRRTS547 on 2017 Toyota Tacoma Double Cab
  The tracks included in the Rhino-Rack RT-Style Roof Rack kit # RRRTS547 (same as RTS547) are each 47" inches long. These are not the crossbars but the rivet-mount tracks that mount permanently to a vehicle or camper shell roof to allow installation of track-mount legs such as # RRRLT600. These legs in turn accept crossbars like # RRVA150B-2 which are 59-inches long; other lengths are available. It sounds like you may prefer a custom-fit cab roof rack rather than a general-purpose track-based...
  view full answer...
• Replacement Leg Tower and Foot for a Rhino Rack RTL600
  Hey Steve! I do not have an individual set of the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item # RRRLT600 but I have a two pack item # RRRLT600H.
  view full answer...
• Best Roof Rack Options for a 2016 Land Rover Discovery/LR4
  Absolutely! A Land Rover Discovery is referred to as the Land Rover LR4 here in North America. This is not to be confused with the Land Rover Discovery Sport which is an entirely different vehicle altogether. The Discovery/LR4 came with two different roof options which were a bare roof and roof with factory installed tracks. If you have the factory installed track system then you can use the Rhino-Rack Vortex Aero Crossbar System which is composed of the the crossbars part # RRVA137B-2,...
  view full answer...
• Roof Rack Tracks & Basket That is Heavy Duty
  Hi Morris, While there isn't anything specific to your 2022 Roxor, there are rivet-mounted tracks you can add. I'm not sure the length you need, but the shortest available is the 36-1/4" long Rhino-Rack RT-Style Roof Rack Tracks # RRRTS540. Then you'd need a roof rack that fits the tracks, and for that you would add the Rhino-Rack Quick Mount Legs # RRRLT600. To complete the rack set up you'd need crossbars, with the right length depending on the width of your roof/cab enclosure. You...
  view full answer...
• Recommended Tonneau Cover and Bike Rack for a 2024 Ford Ranger
  Hey John, welcome back and thanks for the email! I was able to track down all of the parts in the pictures you provided and find the same model tonneau cover that fits your 2024 Ford Ranger XLT with a 5' bed. I have listed all of the parts below: Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover - Aluminum - Matte Black item # PE94NJ Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 item # RRRLT600 Rhino-Rack Vortex Aero Crossbars...
  view full answer...
• Will RCL Legs Fit Rhino-Rack Backbone Roof Rack Mounting System
  Hi Andrew; the Rhino-Rack Backbone Roof Rack Mounting System # RRRJKB1 and the RCL Legs # RRRCL6 are compatible. The spacers # RRQMHD05-3 act as an adapter since the HD bars won't fit as is. If you're fabricating your own crossbars it will be up to you to figure out how to mount them.
  view full answer...
• Replacement Crossbar and Feet Recommendation for Rhino Rack Backbone Roof Rack Kit
  If you have the Rhino-Rack Backbone Roof Rack Mounting System # RRRJKB1 on your Jeep already you should have a roof rack that has 3 crossbars already. Do you need additional crossbars or are you looking for a carrier of some type to carry a bike or kayak carrier?
  view full answer...
• Can The Rhino Rack RCL Legs Be Used With Other Brands Of Platform?
  It seems that you are on the right track here. The RCL legs # RRRCL6 and backbone kit # RRRJKB1 are exactly what you will need in order to mount a platform on the roof of your 2016 Jeep Wrangler. That said, the legs are made specifically to work with the Rhino Rack Pioneer platforms. The pioneer platform has a track on the bottom that accepts a 30 mm x 25 mm x 5 mm track nut. I cannot confirm that this will work with other brands of platform, but as long as your platform has a track underneath...
  view full answer...
• Which Legs To Attach Rhino-Rack Pioneer To Rhino-Rack Backbone Roof Rack On 2013 Jeep Wrangler
  The correct legs to attach the Rhino-Rack Pioneer Platform Roof Tray like the # RR52TB to the Rhino-Rack Backbone Roof Rack Mounting System # RRRJKB1 on your 2013 Jeep Wrangler Unlimited is the Rhino-Rack Quick Mount Legs # RRRLT600-3. If you do not already have the leg spacers you will also need the # RRPLHS4. I included videos for the Backbone # RRRJKB1 for you to take a look at.
  view full answer...
• Three Crossbar Roof Rack for 2017 Jeep Wrangler Unlimited Hardtop for Carrying Roof Tent
  For your 2017 Jeep Wrangler Unlimited with a hard top the three crossbar Rhino Rack roof rack part numbers # RRVA150B-3, # RRRLT600-3, # RRRJKB1, # RRQMFK05, and # RRQMVA05 would be an excellent option with more than enough weight capacity for the tent you have. Three bars is going to give you a more stable base for the tent so it is for sure the way to go. Cost and availability is available at the attached link for the mentioned roof rack
  view full answer...
• How to Attach a Rhino Rack Pioneer Platform to a Hard Top 2013 Jeep Wrangler Unlimited
  Yes, your 72" x 56" Rhino Rack Pioneer Platform item # RR52TB will fit the hard top 2013 Jeep Wrangler Unlimited. You will need the Rhino-Rack Backbone Roof Rack Mounting System item # RRRJKB1 to install it. I have linked an installation video below.
  view full answer...
• What Yakima Roof Rack Will Fit My 2018 Toyota 4Runner With Fixed Points
  After reading your question, it appears that you would like your front crossbar to be further forward on the roof of your vehicle. The Yakima system you are referencing, the old Q-tower system or its replacement the BaseLine system, are for naked roof applications. That does not apply to your vehicle. Your 2018 Toyota 4Runner has raised rails with fixed points, so a rack that attaches to the frame of your vehicle will not work. Your roof rack will attach via the Yakima Landing Pads which...
  view full answer...
  
• Recommended Roof Rack For Installing Roof Tent On 2018 Jeep Wrangler Unlimited
  The best and easiest way to install a roof rack is via the gutter system on your 2018 Jeep Wrangler Unlimited with hard top. This is actually a very safe and secure way of installing a roof rack as I have not seen any customer feedback stating that their system has slipped off or anything of that nature. For this, I recommend going with the Thule WingBar Evo Crossbars Silver - 60" # TH711500 (or # TH711520 for Black) along with Gutter Feet # TH93ZR. The dynamic weight capacity is 175lbs...
  view full answer...
• Recommended Roof Rack System for 2013 Jeep Wrangler Unlimited to Carry Roof Tent
  In order to be able to use a roof top tent on your 2013 JKU with a hard top you'll need to use the Rhino Rack BackBone System, which reinforces the hard top and does not use the rain gutters that would normally be used to mount a standard roof rack system on the JKU. As a fellow Jeep JKU with a hard top owner, this is the only way that I would even think about mounting a roof tent on my baby and it's going to give you the capacity to carry a tent with ease. The BackBone roof rack system...
  view full answer...
• Rhino Rack Roof Rack for 2018 Jeep Wrangler JLU Mounted Behind Removable Tops
  The Rhino-Rack SG Roof Rack for Rain Gutters - Vortex Aero Crossbars - Aluminum - Black # RRSG59 is only rated for the 88 lb load when installed in the exact way shown. Installing behind the removable tops will work for securing the crossbars when not in use, but it is not recommended to carry a load in that location. If you want the behind the removable tops section, then you will need to reinforce the hardtop. For this I recommend the Rhino-Rack Backbone Roof Rack Mounting System -...
  view full answer...
  
• Which Rhino Rack Pioneer Platform Fits 2018 Jeep Wrangler Unlimited JK
  Since you have the 2018 Jeep Wrangler Unlimited that is a 4 door you would need a different Backbone kit of # RRRJKB1 which comes with the Pioneer Platform part # RR68FM that fits your Wrangler. You are correct the part # RRRJKB2 does only fit the 2 door models.
  view full answer...
• Best Roof Rack for 2015 Jeep Wrangler Unlimited Sahara Hardtop
  We can help you with a roof rack to install on your Jeep Wrangler Unlimited hardtop. For value, good looks and capacity go to the Rhino-Rack Vortex system made of parts # RRVA150B-2, # RRRLT600, # RRRJKB1 and # RRQMFK06. This racks provides 56-inches of available bar space for your cargo.
  view full answer...
  
• What is the Correct Rhino-Rack Platform Rack for a 2015 Jeep Wrangler Unlimited Hard Top
  We have a Pioneer Platform for you, but the Rhino-Rack Pioneer Platform Rack with Backbone Mounting System - 72" Long x 56", part # JB0892, that your referenced is not the correct fit for a 2015 Jeep Wrangler Unlimited hard top. The correct one for you is a combination page that I have linked to below. That combination is made up of: Pioneer Platform Roof Tray - Aluminum - 72" Long x 56" Wide, part # RR42108BF Quick Mount Legs, part # RRRLT600-3 Backbone Roof Rack Mounting System, part...
  view full answer...
• Can I Install Exposed Roof Rack AND Rhino-Rack Roof Rack To Carry Tent On 2014 Jeep Wrangler?
  You won't have the room to properly add a second roof rack like Exposed Racks Roof Rack # ER37FR to your 2014 Jeep Wrangler Unlimited since it already has a Rhino-Rack roof rack consisting of the following parts: Vortex Aero Crossbars 59" # RRVA150S-3, Legs # RRRLT600-3, BackBone # RRRJKB1, Bases # RRQMFK05, and Spacers # RRQMVA05. Even if you did have room to fit the Exposed rack onto the roof gutters, I don't think this would be a good idea since the height would be different for each...
  view full answer...
• Can I Upgrade To 71" Rhino-Rack Heavy Duty Crossbars Instead Of 59" Crossbars On 2012 Jeep Wrangler?
  For your 2012 Jeep Wrangler Unlimited with hard top, Rhino-Rack recommends using Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" # RB1500B-2 along with Legs # RRRLT600, Backbone Mounting System # RRRJKB1, and Leg Spacers # RRQMHD05-2. While Rhino-Rack does not suggest using the 71" Heavy-Duty Crossbars # RB1800B-2 that you were looking at, you can certainly use them as long as they are not longer than the widest point of your vehicle which is usually the mirrors. My research tells...
  view full answer...
• Recommended Platform Rack and Ladder for a 2009 Jeep Wrangler Unlimited
  A cargo basket with a rack is not something we carry, however I do have another solution. What you can do is install a set of crossbars # RRVA150B-2 with the Rhino-Rack Quick Mount Legs # RRRLT600, Rhino-Rack Backbone Roof Rack Mounting System # RRRJKB1 and the Rubber Bases for Rhino-Rack RRRLT600 Quick Mount Legs # RRQMFK06. From here, you'd need to install a platform rack # RR52TB to then be able to use the Folding Ladder for Rhino-Rack Pioneer Platform Rack # RRRAFL. It's a long way...
  view full answer...
• Thickness of Internal Support Bars on Rhino-Rack Backbone Mounting System # RRRJKB1
  The internal base and vertical bars for the Rhino-Rack Backbone Roof Rack Mounting System # RRRJKB1 are steel L-shaped bars. I went out to our warehouse with a digital caliper and measured the actual thickness of each bar to be right at 0.124 inch. They measure 1-1/8 inch x 1-1/8 inch. I have attached a detailed installation video that you can check out as well.
  view full answer...
• Rhino Rack Roof Rack Recommendation for 2018 Jeep JK Wrangler for Fishing Rod Carrier
  For your 2018 Jeep JK Wrangler Unlimited the Rhino Rack roof rack part numbers # RRVA150B-2, # RRRLT600, # RRRJKB1, and # RRQMFK06 are what you need. This is an aero bar roof rack confirmed as a fit for your vehicle that will minimize wind noise that will fit and install well and is compatible with the Rhino Rack Fishing Rod Carrier part # RR573F. Rhino Rack roof racks are great because you get the higher quality of the more expensive brands but at a better price.
  view full answer...
• Can Thule Hullaport XT Attach to Top of Rhino Rack Pioneer Platform Tray
  There's actually an adapter for the Thule Hullaport XT part # TH849000 that would allow it to fit into the channels on top of the Rhino Rack Pioneer Platform for your 2014 Jeep Wrangler Unlimited part numbers # RR42108BF, # RRRLT600-3, # RRRJKB1, and # RRPLHS4.
  view full answer...
• Recommended BackBone Mounting System for a 2012 Jeep Wrangler
  There is a backbone system for the 2012 Jeep Wrangler Rubicon. It is the Rhino-Rack Backbone Mounting System item # RRRJKB2 for the 2-door models or item # RRRJKB1 for 4-door. If you want to attach crossbars you will need the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2 item # RRVA150B-2 Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - Qty 4 item # RRRLT600 Rubber Bases for Rhino-Rack RRRLT600 Quick Mount Legs - Qty 4 item # RRQMFK06
  view full answer...
• Parts Needed to Install the Rhino-Rack Pioneer Platform Rack on a 2012 Jeep Wrangler
  If you have a two door 2012 Jeep Wrangler then in order to install Rhino-Rack Pioneer Platform Rack you will need part # RR42111BF, part # RRRJKB2, and part # RRRLCP39. If you have a four door 2012 Jeep Wrangler then in order to install Rhino-Rack Pioneer Platform Rack you will need part # RR42108BF, part # RRRJKB1, and part # RRRLCP38. The largest platform rack you can install on a two door is 52" long x 56" wide and the largest platform rack you can install on a four door is 72" long...
  view full answer...
• Can I Use 65" Long Crossbars on my Rhino Rack Backbone System on 2013 Jeep JKU Hardtop
  I recommend just swapping out to some longer bars like the 65" long # RRVA165B-2, which will work with the # RRRLT600 legs and the Backbone system # RRRJKB1. You could reasonably use any Rhino Rack vortex aero crossbars on this setup as long as they were long enough. There is also a 71" long bar with the # RRVA180B-2.
  view full answer...
• Recommended Rhino-Rack Roof Rack W/ Backbone System for a 2013 Jeep Wrangler Unlimited
  Hey John, it sounds like you're looking for the Rhino-Rack Vortex Roof Rack # RR44RE using the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600-3, and the Rhino-Rack Backbone Roof Rack Mounting System # RRRJKB1, and the Roof Rack Leg Spacer Blocks for Rhino-Rack Vortex Aero Crossbars # RRQMVA05. From here, you can mount the Rhino-Rack Pioneer Roof Rack Platform for Crossbar # RR42115BF.
  view full answer...
• Will Thule Hullavator Fit Rhino Rack Roof Rack that Fits 2012 Jeep Wrangler Unlimited
  Yes the Thule Hullavator part # TH898 is a fit for the Rhino Rack aero bar roof rack you have on your 2012 Jeep Wrangler Unlimited part numbers # RRVA150B-2, # RRRLT600, # RRRJKB1, and # RRQMFK06.
  view full answer...
• What is the Weight Rating of the Rhino-Rack Gutter Mount Roof Rack on a 2022 Jeep Wrangler Unlimited
  The weight rating for the gutter mount system from Rhino-Rack is really 88 lbs for your 2022 Jeep Wrangler Unlimited with the hard top. Since there are many other options out there with a higher rating I recommend going a different direction. For your application I recommend the Rhino-Rack Backbone roof rack system which consists of the following: 59" HD Crossbars - # RB1500B-2 Quick Mount Legs - # RRRLT600 Backbone System - # RRRJLB1 Rubber Bases - # RRQMFK06 Spacer Blocks - # RRQMHD05-2 This...
  view full answer...
  
• Weight Rating for the Rhino-Rack Gutter Mount Roof Rack on a 2022 Jeep Wrangler Unlimited
  You are correct, the Rhino-Rack SG Roof Rack for Rain Gutters with Vortex Aero Crossbars, # RRSG59 that you linked to is 88 lbs. But don't worry, we have other options. I suggest you consider the Rhino-Rack Backbone roof rack system that starts with the, Backbone System, # RRRJLB1 using Rubber Bases, # RRQMFK06, Spacer Blocks, # RRQMHD05-2 and Quick Mount Legs, # RRRLT600 along with 59" HD Crossbars, # RB1500B-2. This will provide you a heavier rating of 175 lbs. however, please check...
  view full answer...
  
• What Backbone System Works w/ a 2023 Jeep Wrangler 4xe?
  There are tons of options for Jeep's so I would be happy to point you in the right direction. The correct back bone system with a pioneer platform for your 2023 Jeep Wrangler 4xe hard top is the item # JB0893 you were looking at. The Rhino-Rack Pioneer Platform Rack with Backbone Mounting System item # JB0893 measures 72" long x 56" wide. It has a 264 lbs capacity and weighs 94 lbs. If you are wanting a back bone system that mounts traditional crossbars you will need the following...
  view full answer...
• Recommended Roof Rack For Installing Roof Tent On 2018 Jeep Wrangler Unlimited
  The best and easiest way to install a roof rack is via the gutter system on your 2018 Jeep Wrangler Unlimited with hard top. This is actually a very safe and secure way of installing a roof rack as I have not seen any customer feedback stating that their system has slipped off or anything of that nature. For this, I recommend going with the Thule WingBar Evo Crossbars Silver - 60" # TH711500 (or # TH711520 for Black) along with Gutter Feet # TH93ZR. The dynamic weight capacity is 175lbs...
  view full answer...
• Recommended Roof Rack System for 2013 Jeep Wrangler Unlimited to Carry Roof Tent
  In order to be able to use a roof top tent on your 2013 JKU with a hard top you'll need to use the Rhino Rack BackBone System, which reinforces the hard top and does not use the rain gutters that would normally be used to mount a standard roof rack system on the JKU. As a fellow Jeep JKU with a hard top owner, this is the only way that I would even think about mounting a roof tent on my baby and it's going to give you the capacity to carry a tent with ease. The BackBone roof rack system...
  view full answer...
• Rhino Rack Roof Rack for 2018 Jeep Wrangler JLU Mounted Behind Removable Tops
  The Rhino-Rack SG Roof Rack for Rain Gutters - Vortex Aero Crossbars - Aluminum - Black # RRSG59 is only rated for the 88 lb load when installed in the exact way shown. Installing behind the removable tops will work for securing the crossbars when not in use, but it is not recommended to carry a load in that location. If you want the behind the removable tops section, then you will need to reinforce the hardtop. For this I recommend the Rhino-Rack Backbone Roof Rack Mounting System -...
  view full answer...
  
• Best Roof Rack for 2015 Jeep Wrangler Unlimited Sahara Hardtop
  We can help you with a roof rack to install on your Jeep Wrangler Unlimited hardtop. For value, good looks and capacity go to the Rhino-Rack Vortex system made of parts # RRVA150B-2, # RRRLT600, # RRRJKB1 and # RRQMFK06. This racks provides 56-inches of available bar space for your cargo.
  view full answer...
  
• What Heavy-Duty Crossbar Setup do You Recommend for My 2018 Jeep Wrangler Unlimited with Hard Top?
  For mounting a heavy duty crossbar setup on your 2018 Jeep Wrangler Unlimited JK, I recommend the following components: - Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" # RB1500B-2 - Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600 - Rhino-Rack Backbone Roof Rack Mounting System # RRRJLB1 - Rubber Bases for Rhino-Rack RRRLT600 Quick Mount Legs # RRQMFK06 - Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars - 5 mm Thick...
  view full answer...
• Recommended Platform Rack and Ladder for a 2009 Jeep Wrangler Unlimited
  A cargo basket with a rack is not something we carry, however I do have another solution. What you can do is install a set of crossbars # RRVA150B-2 with the Rhino-Rack Quick Mount Legs # RRRLT600, Rhino-Rack Backbone Roof Rack Mounting System # RRRJKB1 and the Rubber Bases for Rhino-Rack RRRLT600 Quick Mount Legs # RRQMFK06. From here, you'd need to install a platform rack # RR52TB to then be able to use the Folding Ladder for Rhino-Rack Pioneer Platform Rack # RRRAFL. It's a long way...
  view full answer...
• 2015 Jeep Wrangler Roof Rack with Rhino Rack Vortex RLT600 for Rhino-Rack 2 Kayak Carrier
  The Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 are designed to fit the tracks like # RTC16. Another popular option is to use the backbone roof mounting system for Jeep Wrangler hard tops # RRRJKB2 and rubber bases # RRQMFK06. Then you will simply use crossbars like the 59 inch # RRVA150B-2 to complete the roof rack. This complete system will allow you to use most roof accessories like the 2 Kayak Carrier # S512 and RRS512X....
  view full answer...
• Rhino Rack Roof Rack that Fits 2017 Jeep Wrangler Unlimited
  If you'd be willing to drill into the hardtop of your Wrangler Unlimited there's no reason you couldn't install the Rhino Rack roof rack for camper shells part # Y01-120B. The tracks are 63 inches long so you'd want to make sure you'd have space for them on your roof. We also have Rhino Rack roof racks that fit your 2017 Jeep Wrangler Unlimited with the part numbers # RRVA150B-2, # RRRLT600, # RRRJKB2, # RRQMFK06 which attaches to the rain gutters and doesn't require modification of the...
  view full answer...
• Rhino Rack Roof Rack Recommendation for 2018 Jeep JK Wrangler for Fishing Rod Carrier
  For your 2018 Jeep JK Wrangler Unlimited the Rhino Rack roof rack part numbers # RRVA150B-2, # RRRLT600, # RRRJKB1, and # RRQMFK06 are what you need. This is an aero bar roof rack confirmed as a fit for your vehicle that will minimize wind noise that will fit and install well and is compatible with the Rhino Rack Fishing Rod Carrier part # RR573F. Rhino Rack roof racks are great because you get the higher quality of the more expensive brands but at a better price.
  view full answer...
• Recommended BackBone Mounting System for a 2012 Jeep Wrangler
  There is a backbone system for the 2012 Jeep Wrangler Rubicon. It is the Rhino-Rack Backbone Mounting System item # RRRJKB2 for the 2-door models or item # RRRJKB1 for 4-door. If you want to attach crossbars you will need the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2 item # RRVA150B-2 Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - Qty 4 item # RRRLT600 Rubber Bases for Rhino-Rack RRRLT600 Quick Mount Legs - Qty 4 item # RRQMFK06
  view full answer...
• Roof Rack For 2-Door 2016 Jeep Wrangler With 3-Piece Hard Top
  So there are two options for a roof rack for your 2016 Jeep Wrangler with a 3-piece hard top, and both are going to involve drilling into your roof so it will be a permanent application. One is from Rhino-Rack and the other from Yakima, with the difference being the Backbone support system from the Rhino-Rack being sturdier overall than the Yakima's simple footpads. So I'd go with the Rhino-Rack, but either system will work, and here are the needed parts for you: Yakima - Yakima JetStream...
  view full answer...
• Installing a Rhino Rack Vortex Aero Kit onto a 2016 Mercedes-Benz Metris
  The QM6 Fit Kit, part # RRQMFK06 is the correct fit kit for your vehicle, however it's not illustrated very well in the documentation that comes in its packaging. I've summarized the installation process for this kit, which should be found with the individual bars or foot pack for this kit. When you go to install your roof rack, going from the front of the vehicle, the 1st, 3rd and 5th plugs, depending on where you want the roof rack to be on the vehicle. Prior to fitting the fit kit...
  view full answer...
• Do You Have Any Yakima Roof Tracks Available to Fir my Yakima Roof Rack?
  I have an alternate solution to the shipping time problem. I looked at the other sizes of Yakima rail systems, and they all will have about the same shipping time as the Yakima 54" Tracks for Roof Racks # RRRTV148 that you ordered. With that being said, another solution is to purchase the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 58" Long - Qty 2 # RRRTV148. However, this track is not compatible with your Yakima setup. If you choose to go this route, here is what you will need:...
  view full answer...
• Will Thule Hullavator Fit Rhino Rack Roof Rack that Fits 2012 Jeep Wrangler Unlimited
  Yes the Thule Hullavator part # TH898 is a fit for the Rhino Rack aero bar roof rack you have on your 2012 Jeep Wrangler Unlimited part numbers # RRVA150B-2, # RRRLT600, # RRRJKB1, and # RRQMFK06.
  view full answer...
• Roof Rack for 2015 Jeep Wrangler Sport 2 Door that Uses Backbone System
  If you wanted to do a roof rack with crossbars that utilizes the Rhino Rack backbone system you'd need the part numbers # RRVA150B-2, # RRRLT600, # RRRJKB2, and # RRQMFK06 or if you wanted a platform style tray rack you'd want the part number # RR33QX.
  view full answer...
• 2022 Jeep Gladiator Rhino-Rack Roof Rack Using Backbone System
  To install crossbars with the Rhino-Rack Backbone system on your 2022 Jeep Gladiator you need the following parts: Backbone Roof Rack System - # RR65QJ Rubber Bases - # RRQMFK06 Quick Mount Legs - # RRRLT600 HD Leg Spacer Blocks - # RRQMHD05 (you need 2 of these) 59" HD Crossbars - # RB1500B-2 Please note this isn't a fit that Rhino-Rack has listed but I don't see why this wouldn't work since you're just replacing a fit kit with the Backbone which is supposed to offer much more support....
  view full answer...
• Which Rhino Rack Roof Rack Parts are Needed to Install on 2007 Jeep Wrangler
  The correct parts you need to install a Rhino Rack Aero Vortex roof rack on your 2007 Jeep Wrangler are part numbers # RRVA150B-2, # RRRLT600, # RRRJKB2, and # RRQMFK06 and you'd be set.
  view full answer...
• 2016 Mercedes-Benz Metris Compatible Roof Rack To Use With Rhino Rack Sunseeker Awning RR32133
  Since your 2016 Mercedes-Benz Metris has no existing rails you should get the Rhino-Rack Vortex Aero Crossbars, either black # RRVA150B-2 or silver # RRVA150S-2 and mount them to the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 and you'll need these Rubber Bases # RRQMFK06 for the RRRLT600 feet. Once you have these installed, the Rhino-Rack Sunseeker Awning # RR32133 will install right to the Vortex Aero Bars. There is an Extension Piece # RR32112 for the Sunseeker....
  view full answer...
• Does Rhino Rack Pioneer Platform Have Capacity for Roof Mounted Tent
  While the Rhino Rack Pioneer Platform with Backbone part # RR33QX has a dynamic weight rating that is lower than it would appear you need you should keep in mind that the static weight capacity would be high enough although this is rated with a static rating. Dynamic weight capacity is the capacity it could carry while on the road which will have bumps and dips which would exaggerate the weight on the rack. The static weight capacity is the amount of weight it could carry when not moving,...
  view full answer...
• Recommended Roof Rack for a 2018 Jeep Sahara JK Wrangler Unlimited
  I have a great solution for you but the Yakima roof rack system for your 2018 Jeep Sahara JK Wrangler Unlimited is not capable of hauling kayaks. Instead you will want to use the 2018 Jeep JK Wrangler Roof Rack by Rhino Rack which includes the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2 item # RRVA150B-2 Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 item # RRRLT600 Rhino-Rack Backbone Roof Rack...
  view full answer...
• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• What is the Weight Rating of the Rhino-Rack Gutter Mount Roof Rack on a 2022 Jeep Wrangler Unlimited
  The weight rating for the gutter mount system from Rhino-Rack is really 88 lbs for your 2022 Jeep Wrangler Unlimited with the hard top. Since there are many other options out there with a higher rating I recommend going a different direction. For your application I recommend the Rhino-Rack Backbone roof rack system which consists of the following: 59" HD Crossbars - # RB1500B-2 Quick Mount Legs - # RRRLT600 Backbone System - # RRRJLB1 Rubber Bases - # RRQMFK06 Spacer Blocks - # RRQMHD05-2 This...
  view full answer...
  
• Weight Rating for the Rhino-Rack Gutter Mount Roof Rack on a 2022 Jeep Wrangler Unlimited
  You are correct, the Rhino-Rack SG Roof Rack for Rain Gutters with Vortex Aero Crossbars, # RRSG59 that you linked to is 88 lbs. But don't worry, we have other options. I suggest you consider the Rhino-Rack Backbone roof rack system that starts with the, Backbone System, # RRRJLB1 using Rubber Bases, # RRQMFK06, Spacer Blocks, # RRQMHD05-2 and Quick Mount Legs, # RRRLT600 along with 59" HD Crossbars, # RB1500B-2. This will provide you a heavier rating of 175 lbs. however, please check...
  view full answer...
  
• What Backbone System Works w/ a 2023 Jeep Wrangler 4xe?
  There are tons of options for Jeep's so I would be happy to point you in the right direction. The correct back bone system with a pioneer platform for your 2023 Jeep Wrangler 4xe hard top is the item # JB0893 you were looking at. The Rhino-Rack Pioneer Platform Rack with Backbone Mounting System item # JB0893 measures 72" long x 56" wide. It has a 264 lbs capacity and weighs 94 lbs. If you are wanting a back bone system that mounts traditional crossbars you will need the following...
  view full answer...
• Comparison of Rhino-Rack Heavy-Duty and Rhino-Rack Vortex Aero Roof Racks
  The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets # RRRCB-RSHB-RJHB as an example. That's the purpose of the name, and the advantage of the rack. This rack is made up of the following parts: Rhino-Rack Heavy-Duty Roof Rack Crossbars: # RB1375 Qty 2 Rhino-Rack Quick Mount Legs: # RRRLT600 Qty 4 Roof Rack Leg Spacer Blocks: # RRQMHD05-2 Qty...
  view full answer...
• Will Rhino-Rack Roof Rack Fit 2006 Jeep Wrangler Rubicon
  The Rhino-Rack Roof Rack Legs # RL150S2 are designed to fit factory rain gutters on certain models of the Jeep Cherokee and Liberty. Unfortunately, there is not a rain gutter mount for your Rubicon. If you want to add the Rhino-Rack square bars shown with these legs to your 2006 Jeep Wrangler Rubicon you will need the following: -Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500B-2 -Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 -Rhino-Rack RT-Style Roof Rack Tracks...
  view full answer...
• Will a Paddleboard Fit a Rhino-Rack Roof Rack on a 2015 Jeep Wrangler with a Hard Top
  Rhino-Rack SG Roof Rack # RRSG60 for rain gutters has a capacity of 88 pounds so provided that your 11 foot paddleboard is under 88 pounds then it can support the board. However, this roof rack has a narrow bar spread of 19 inches from the center of one bar to the center of the other bar meaning you would need to make certain that the board is tied down at the bow and stern and placed so that the weight is evenly distributed to both bars. Also since the crossbars are basically positioned...
  view full answer...
• Can Tracks of Rhino-Rack # Y02-490B Be Cut To Desired Length?
  The Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 54" Long # Y02-480B can in theory be used on your 2010 Jeep JKU Wrangler hard top but it is not a confirmed fit. The tracks can be cut to your desired length. Because this system is not a confirmed fit, the rated capacity will most likely be more similar to the 99 lbs of the similar Rhino-Rack Track fit confirmed for your vehicle. That rack consists of # RB1500B-2, # RRRLT600, # RTC12JWMY11,and # RRQMHD05-2.
  view full answer...
• What Heavy-Duty Crossbar Setup do You Recommend for My 2018 Jeep Wrangler Unlimited with Hard Top?
  For mounting a heavy duty crossbar setup on your 2018 Jeep Wrangler Unlimited JK, I recommend the following components: - Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" # RB1500B-2 - Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600 - Rhino-Rack Backbone Roof Rack Mounting System # RRRJLB1 - Rubber Bases for Rhino-Rack RRRLT600 Quick Mount Legs # RRQMFK06 - Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars - 5 mm Thick...
  view full answer...
• What Parts Do I Need To Install Rhino-Rack Roof Rack On 2020 Mercedes Benz Sprinter 2500 High Roof?
  Since your 2020 Mercedes-Benz Sprinter 2500 High Roof has factory roof rails running front to back then you can go with the Rhino-Rack Vortex Aero Crossbars or the Rhino-Rack Heavy Duty Square Bars. For the aero bars you need Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 71" Long # RRVA180B-2, Legs # RRRLT600, and Nuts # RRQMFK11-2. For the heavy duty square bars you need Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 71" Long # RB1800, Legs # RRRLT600, Nuts # RRQMFK11-2,...
  view full answer...
• Can I Upgrade To 71" Rhino-Rack Heavy Duty Crossbars Instead Of 59" Crossbars On 2012 Jeep Wrangler?
  For your 2012 Jeep Wrangler Unlimited with hard top, Rhino-Rack recommends using Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" # RB1500B-2 along with Legs # RRRLT600, Backbone Mounting System # RRRJKB1, and Leg Spacers # RRQMHD05-2. While Rhino-Rack does not suggest using the 71" Heavy-Duty Crossbars # RB1800B-2 that you were looking at, you can certainly use them as long as they are not longer than the widest point of your vehicle which is usually the mirrors. My research tells...
  view full answer...
• Recommended Rhino-Rack Roof Rack For a 2017 Mercedes-Benz Sprinter 2500 With Factory Side Rails
  For your 2017 Mercedes-Benz Sprinter 2500 with the factory rails I recommend the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1800B-2 with Rhino-Rack Quick Mount Legs # RRRLT600, Quick Mount Nuts # RRQMFK11-2 and Roof Rack Leg Spacer Blocks # RRQMHD05-2. You will need to replace the channel nuts that come on the legs for the larger M6 30 mm x 25 mm x 5 mm Zinc Nuts # RR96TB. The Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT only uses 65" long crossbars and the only recommended...
  view full answer...
• Front & Back Hitches With Accessories For Ultimate Mercedez-Benz Sprinter Van 3500
  The Swagman Skaha 2 Plus Bike Rack with Cargo Carrier # S69SR is definitely the move for you, but if you plan on putting it in the front of your 2017 Mercedes-Benz Sprinter 3500, you'll need a front hitch # 306-X7352. For the back if you have a factory step bumper you'll need this hitch # 75601 and if you have a Standard bumper you'll need this one # 75549. In order to use the Yakima EXO Swing Away Enclosed Cargo Carrier # Y62VR you'll need a class III hitch or higher. If you wanted to...
  view full answer...
• Lockable Roof Rack and Snowboard Carrier for 2016 Jeep Wrangler Unlimited
  The Rhino-Rack Roof Rack # RRSG59 mentioned in your question for your 2016 Jeep Wrangler Unlimited is not compatible with any key lock system. However, they do have built-in security hardware because the legs can only be loosened by the special tool that comes with the roof rack. This roof rack has a weight capacity of 88 pounds, though you will want to check your vehicle owner's manual for its roof weight capacity. If you would like a roof rack that can be locked to your Jeep with a...
  view full answer...
• Recommended Roof Rack Compatible with 2007 Jeep Wrangler JK with Hard Top
  The # Y02-490B is not a fit for your Jeep. Instead you will want the following for the similar system: Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long # RB1500B-2 Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JWMY11 Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars # RRQMHD05-2 An alternative option to consider is the Rhino-Rack SG Roof Rack for Rain Gutters - Vortex Aero Crossbars - Aluminum -...
  view full answer...
• Is Drilling Required to Install Rhino-Rack Roof Rack on 2015 Ford Transit Connect Long Wheelbase
  I'm not 100 percent certain what you mean by "threaded sleeves" but if your have a 2015 Ford Transit Connect with a long wheelbase, you will need to drill holes in your roof in order to attach the Rhino-Rack RT-Style Roof Rack Tracks # RRRTS547, which is what you will mount the rest of the roof rack system to; there are no threaded holes with which to install this rack. Once the tracks are in place you will complete the installation by adding the Roof Rack Leg Spacer Blocks # RRQMHD05-2,...
  view full answer...
  

Do you have a question about this Roof Rack?