What Mounting System Do I Need to Use for the Pioneer Platform # RR42108BF on My Leer 100XR Shell?

Question

Question:

Would the RRRLT600 work as well, instead of the backbone mounting system?

asked by: Kiki P

0

Expert Reply:

I have a great platform solution for you. Unfortunately, the Rhino-Rack Pioneer Platform 72" Long x 56" Wide RR42108BF is discontinued. However, with the recommended fit of the Rhino-Rack Pioneer Platform Rack for Short Camper Shells - Backbone - 60" Long x 56" Wide # RR63ZW, you will have both the platform and the mounting hardware available for installation with the modular Backbone. The Modular Backbone is designed to fit the track on the 100XR.

expert reply by: Bob C

0

Kiki P.

1/1/0001

Would the RRRLT600 work as well, instead of the backbone mounting system?

Bob C.

9/30/2021

I went ahead and followed up with my tech at Rhino-Rack, and she confirmed that the tracks on your Leer 100XR are only compatible with the Rhino-Rack Universal Modular Backbone Mounting System - Short # RR57AT. Unfortunately, the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600 are not confirmed to fit those particular tracks.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 6

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 7

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 8

I've attached a little diagram below from the instructions of the Demco Air Force One Supplemental Braking System w/ Wireless Coachlink #DM26VR that shows how to wire your reed switch. In the 2-wire reed switch setup you will just run the black…

view full answer...

Answer 9

The video's on the wrong page but the pictures are correct for item #SM99726. For the male side you will need the Replacement 1/4" Pushlock x 1/8" MPT Elbow for Demco Air Force One Flat Tow Brake System item #SM18711.

view full answer...

Answer 10

I spoke with my contact at SMI and the piece you are looking for is #SM99625 which is the fitting and the bracket. Or if the bracket is still fine and all you need is the fitting you just need the part #SM99726.

view full answer...

Answer 11

Hi Bill; are you referring to the Replacement Car-Side Pushlock Connector for Demco Air Force One Air Jumper #SM6214? If not, please respond below in the comments. I am also attaching the installation manual for the Demco Air Force One #SM99243…

view full answer...

Answer 12

You can use the 1/4" Air Line Hose - SMI Air Force One or Stay-In-Play Duo Supplemental Braking System #DM16114 sold in 1 foot increments, so if you need 6 feet of new hose you can simply select quantity 6 on that product page and you will…

view full answer...

What Mounting System Do I Need to Use for the Pioneer Platform # RR42108BF on My Leer 100XR Shell?

Products Featured in This Question

Continue Researching