Rhino-Rack Roof Rack for Truck Cap Track System

Question

Question:

Will this mount directly to a truck cap with existing tracks? Or do I need to have something additional?i was lookinh at purchasing the kit listed in the attachment but seems like a better price to buy it as an assembly? Is there a difference?

asked by: Dan

0

Expert Reply:

For your truck topper with existing track system, I recommend the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 2 # RLTP along with the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 65" Long # RB1650B-2.

If you prefer the vortex style bars then use Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 and # RRVA165B-2.

expert reply by: Jason S

0

Dan

5/13/2020

Will this mount directly to a truck cap with existing tracks? Or do I need to have something additional?i was lookinh at purchasing the kit listed in the attachment but seems like a better price to buy it as an assembly? Is there a difference?

Jason S.

5/13/2020

The Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 59" Long # Y02-490B-NT is the same as the # RRVA150B-2 and # RRRLT600. There is nothing else needed so I would either get the kit or the separate parts depending on the cost at time of purchase.

Answer 1

Roof rack options for your 2014 Chevrolet Express Van with rain gutters are displayed on the linked page and these include products from Inno, Rhino-Rack and Thule. As you review the rack systems you will notice that their weight ratings vary…

view full answer...

Answer 2

I would not recommend going with the Rhino-Rack Roof Rack Legs #RRRL110S5-2 over the #RRRL150GMC-2. While both are gutter mount options, the #RRRL150GMC-2 have been confirmed to fit and provide the proper roof clearance for adding crossbars to your…

view full answer...

Answer 3

Hello Christina. The 60" Inno Square Crossbars #INB165 you mentioned may work for you. These will only work with the Inno square bar towers, or the old-style Thule square bar towers. So as long as this is what you have they will work great. The…

view full answer...

Answer 4

Although the Thule system you referenced would work well, in my opinion the clamp system used by the Rhino Rack Roof Rack is a bit more substantial, and would get a better grip on the rain rain gutter. You can install a Rhino Rack Roof Rack by using…

view full answer...

Answer 5

The Inno Square Crossbars part #INB165 and the Thule Square Load Bars part THLB65 are both 65" long x 1-1/4" wide x 7/8" tall so yes, they should work in place of one another just fine.

view full answer...

Answer 6

The Rhino-Rack Pioneer Platform Cargo Rack #RR75TB with Gutter Mount Legs #RL110S2 and spacers #LHSPAIR isn't a system intended for installation on an aftermarket roof rack but we do have rack-mountable options for you. The linked page will show…

view full answer...

Answer 7

For your Rhino-Rack SG Roof Rack for Rain Gutters #RRSG59, I recommend taking a look at the: -Rhino-Rack Batwing Awning #RR33100 for the driver's side, or, -The Rhino-Rack Batwing Awning #RR33200 for the passenger side. These awnings will connect…

view full answer...

Answer 8

If you were looking for 54" crossbars, then the Rhino-Rack Roof Rack for Factory Tracks #Y02-480B-NT will work on the existing tracks on your camper shell. This kit includes the Rhino-Rack Quick Mount Legs #RRRLT600 and the 54" Vortex…

view full answer...

Answer 9

I would be happy to help you. For the Yakima tracks on your Lance 815 Camper, I recommend the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item #RRRLT600. Which crossbars you need will depend on how far apart your tracks are mounted and how…

view full answer...

Answer 10

The Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-490B that you referenced actually comes with the tracks so since you already have Thule tracks on your Leer truck cap you need part #Y02-490B-NT instead.

view full answer...

Answer 11

The track on the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-490B can be cut down to the size you need. But, the crossbars cannot be cut. That being said, you should not need to trim down the crossbars. It is also important to note that the…

view full answer...

Answer 12

I really like the Rhino-Rack Vortex Aero crossbars for the factory truck tracks like what you have on your ARE camper shell because they can easily be removed if you ever want to take them off. There are locks for this system as well so even though…

view full answer...