Erickson Ratchet Tie-Down Straps w/ Web Clamps and S-Hooks - 1-1/4" x 12' - 667 lbs - Qty 2

See what our Experts say about this Erickson Ratchet Straps

• Availability of Bike Rack with Ramp to Carry 75 lb E-Bike
  The bike rack with the highest weight capacity that has a ramp that can be utilized is the Thule EasyFold XT # TH903202 but it can only handle up to 65 lb E-Bikes and I'm not sure if you'd be able to get your bike down that low. We do have the Hollywood Racks Sport Rider SE # HLY74FR which would be able to carry your 75 lb E-Bike but this doesn't have a ramp so you'd have to muscle the bike up to the bike rack. Because of this, the best option for your application is to use a motorcycle...
  view full answer...
• Recommended Hitch Mounted Carrier For Vespa Scooter To Carry Behind 2015 Ford Edge
  We have a couple carriers that will work for your 2015 Edge and your wife's Vespa. You mentioned the weight of the Vespa at 245-lbs. Is that the weight of the scooter when it is full of fuel or with the battery included? You will want to make sure you do not exceed the capacity of the carrier or the trailer hitch on your Edge. Since the motor on the Vespa is located right in front of the rear wheel, you want to make sure you place the scooter in the carrier so that the weight is evenly...
  view full answer...
• What Scooter Carrier do You Recommend for My Honda Metropolitan?
  Without knowing the tire width or length of your particular Honda Metropolitan scooter, the best option we have is the Ultra-Fab Dirt Bike Carrier for 2" Hitches - With Ramp - 77" Long # UF48-979033. This carrier has a 500 pound capacity and does not have a tilting feature. It also comes with a ramp to make your loading experience easy and hassle-free. The carrier measures 77 inches long and has an internal track width of 5 inches. If your scooter's wheelbase is longer than 77 inches and...
  view full answer...
  
• Will the 2019 Honda PCX150 Fit etrailer Motorcycle Carrier Part # e98873
  I took a look at the 2019 Honda PCX150 and compared that to the etrailer Motorcycle Carrier part # MT70101. The weight, wheelbase, and tire size of the PCX150 all fall within the range of the etrailer Motorcycle Carrier part # MT70101 therefore I believe it will work for you. However, we have not yet tested this carrier with a PCX150 so I would not be able to confirm of its compatibility 100%. In order to secure the PCX150 to the MaxxTow MaxxHaul Aluminum Motorcycle Carrier I recommend...
  view full answer...
• Weight Capacity the etrailer Motorcycle Carrier
  Yes, the weight capacity on the etrailer Motorcycle Carrier for 2" Hitches # e98873 is 500 lbs. This item can certainly hold the weight, as long as the scooter fits on the carrier. I recommend tie-down straps # EM31353, with these straps you will have no trouble carrying this item. Be sure to check your vehicle and trailer hitch tongue weight to make sure it will support the weight of the carrier and the scooter.
  view full answer...
  
• Recommended Front Mount Receiver for Carrying Small Motorcycle on 2019 Ram 2500
  I recommend the Curt # C31089 front mounted receiver which is a confirmed fit for your 2019 Ram 2500. The hitch has a 500 lb vertical load capacity, which means that the bike plus the carrier you're planning on using can't have a combined weight greater than 500 lbs. if you don't have a carrier, I'd recommend the Ultra-Fab # UF48-979033 which can accommodate bikes weighing up to 500 lbs with tires up to 5 inches in width. The rack also includes a loading ramp, which stows on the carrier...
  view full answer...
• Front Mounted Receiver Hitch Recommended for 2020 Ram 3500 Truck
  We do offer a front mounted receiver for your 2020 Ram 3500, part # DT36MR (does not work with diesel models). The hitch as a vertical pull limit of 500 lbs, which means that as long as the dirt bike and its carrier doesn't weigh more than 500 lbs, it'll work just fine for you. If you don't yet have a carrier, I'd recommend the Ultra-Fab # UF48-979033 which can handle bikes weighing up to 500 lbs with tires up to 5 inches wide. Ratchet straps like # EM31353 would work well to secure the...
  view full answer...
• Recommended Trailer Hitch Receiver and Motorcycle Carrier for 2012 Honda Odyssey
  For your 2012 Honda Odyssey EX, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75270. This hitch is rated for up to 675 lbs tongue weight. You will also need a product like part # PC3, part # e98880, or part # 63232 to secure the accessory in your 2" trailer hitch receiver, and then the Ultra-Fab Dirt Bike Carrier # UF48-979033. I also recommend the Erickson Ratchet Tie-Down Straps w/ Web Clamps and S-Hooks - 1-1/4" x 12' - 667 lbs - Qty...
  view full answer...
• What Generator Carrier do You Recommend for My 2021 Forest River Columbus Fifth-Wheel?
  I have a solution for you to transport your generator. I reached out to my contact at Mount-N-Lock, and he confirmed that the bumper's receded mounting point of 6 inches from the end of the trailer will not allow you to install the GennyGo Generator and Cargo Carrier for RV Bumpers # MNT34FR. This is because it will most likely interfere with the railing on the platform. With that being said, the best bet is to use your hitch. Since all hitch-mounted generator carriers do not have the...
  view full answer...
  
• Do You Carry Ratcheting Tie-Down Straps Which Use White Straps?
  Currently the ShockStrap E-Track Ratchet # 297-20ETBB are our only ratchet straps that are white in color. The Erickson Ratchet Tie-Down Straps # EM31353 are silver in color.
  view full answer...
• Using the Ultra-Fab Motorcycle Carrier and the Roadmaster High-Low Adapter for an E-Bike
  You can use the Ultra-Fab Motorcycle Carrier for 2" Hitches, part # UF48-979033, to carry your bike. You will need to ensure that you tighten this down well with straps like the Erickson Ratchet Tie-Down Straps w/ Web Clamps and S-Hooks, part # EM31353. I've linked to a video review of these straps below. As for using a riser in your shank, you can use the Roadmaster High-Low Adapter for Tow Bars - 2" Hitches, part # RM-076. It fits 2" receivers and gives you a 6" rise. I've linked to...
  view full answer...
• Is the Ramp of the Ultra-Fab Dirt Bike Carrier Too Steep for My 50 cc Scooter?
  I have a solution for you. The incline of the ramp on hitch-mounted cargo carriers differ for each vehicle. This is because the ground clearance for each vehicle has a different height from the bottom of the carrier to the ground. With that being said, the pictures of the include of the ramp of the Ultra-Fab Dirt Bike Carrier for 2" Hitches - With Ramp - 77" Long - 500 lbs # UF48-979033 is misleading because you may have a different ground clearance height than the vehicle in the photo....
  view full answer...
• Will the etrailer Motorcycle Carrier Work With Scooter on 2019 Subaru Ascent
  So long as your 2019 Subaru Ascent has a 2 inch trailer hitch receiver like the Curt Trailer Hitch # C13400 or Draw-Tite Trailer Hitch # 76253 then a scooter can be carried by the etrailer Motorcycle Carrier for 2" Hitches # e98873. The only thing you'll need to take note of is the track width, which is 5" so that is the largest your tires can be. I was unable to find your tire's exact width but if they are larger then the carrier wouldn't work. If you are able to use the # e98873 then...
  view full answer...
  
• Recommended Bike and Vespa Motor Scooter Carrier for 2018 Winnebago View
  For your 2018 Winnebago View, I recommend you start with the trailer hitch receiver. I recommend the Curt Adjustable RV Trailer Hitch Receiver - 18"-51" Wide - 2" Drop # C13701. This hitch is rated for up to 500 lbs tongue weight. If your motorhome comes with a hitch, you will need to make sure it is rated for at least 350 lbs. Your Vespa 150 scooter's weight of 250 lbs will work well on the etrailer Motorcycle Carrier # e98873. You will also need straps like # EM31353. The carrier...
  view full answer...
• E Track Placement Recommendation for Motorcycle Trailer
  Basically you'll have to mock up where you want the motorcycle to be and where the best place will be for the e-track as there isn't a set place to install the tracks in every trailer. Typically you want the tie down anchors to be about 36 inches apart from each other to get the best angle for them to pull down. For tie down anchors that fit in the e-track slots we have the part # 59131 which would fit and work well. Then for a set of ratchet straps the Erickson kit part # EM31353 would...
  view full answer...
• Cargo Carrier Compatibility With Small Honda Ruckus Scooter
  Your Honda Ruckus has a wet weight of 194 lbs., so you can use it with many cargo carrier options like the 24x60 Curt Cargo Carrier for 2" Hitches - Steel - 500 lbs # C18152. You will just need to make sure that your towing vehicle and hitch receiver rated tongue weights are able to support the weight of the scooter along with the 64 lb carrier. If this is all you will be using the carrier for, you may be interested in the etrailer Motorcycle Carrier for 2" Hitches - 500 lbs # e98873...
  view full answer...
• Will the Yakima SkyBox 21 Accommodate a Box that is 22 H x 17 W x 37 Long?
  I have a solution for you. Unfortunately, the Yakima SkyBox 21 # Y07337 (or any other cargo box we carry) will not accommodate the 22-inch height of your shipping box. However, the Yakima SkyBox 21 will accommodate your travel case and gold clubs. For an alternative way to travel with your travel box, a hitch-mounted carrier is the way to go. I recommend the 19x47 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 300 lbs # C18110. With the Curt Cargo Carrier, you will need the Erickson...
  view full answer...
• What do You Recommend for Transporting My 88-Pound E-Bike on a 2018 Subaru Outback?
  If you are looking for a way to transport your 88-pound Ariel Rider Grizzly, we do not have a standard bike rack that can accommodate that weight. However, the best and easiest route is to use a dirt bike/moped carrier like the Ultra-Fab Dirt Bike Carrier for 2" Hitches - With Ramp # UF48-979033. This carrier comes with an inside track width of 5 inches wide, so it is plenty of room for your 4-inch wide tires. It also comes with an included ramp to make loading a piece of cake. For a locking...
  view full answer...
• Front Mounted Trailer Hitch and Motorcycle Carrier for 2015 Toyota Tundra
  The Draw-Tite Front Mount Trailer Hitch # 65080 that fits your 2016 Toyota Tundra has a vertical load limit (the front mount hitch version of tongue weight) of 500 lbs; you can use this hitch and tow your trailer at the same time so long as your weights stay within their respective capacities. To haul your bike I recommend checking out the etrailer Motorcycle Carrier # e98873. The carrier weighs 58 lbs and has a 500 lb capacity; your bike will fit so long as it has tires which are less...
  view full answer...
• Front Hitch Receiver and Carrier for 250 lb Motor Scooter on 2007 Ford E-450 Chassis
  The Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 65001 is a confirmed fit for your 2007 Ford E-450 Cutaway RV Chassis. It is rated for a vertical load of 500 lbs, so you can use it for a motor scooter that is 250 lbs. If your motor scooter is a motorized bike style, I recommend the etrailer Motorcycle Carrier for 2" Hitches # e98873 along with tie downs # EM31353. This combination will work well on your vehicle. If your motor scooter is a mobility style scooter,...
  view full answer...
• Is Safe Working Load Limit of Erickson Ratchet Tie-Down Straps Per Strap or the Pair?
  The 667 lb safe working load limit (WLL) of the Erickson Ratchet Tie-Down Straps # EM31353 is per single strap. The combined WLL for a pair will be 1,334 lbs so you will be fine using these on a 480 lb sportbike. I've added links to a pair of video reviews on these straps for you to take a look at as well.
  view full answer...
• Recommended Hitch Mount Carrier for a 2006 Vespa LX150 on a 2013 Toyota Highlander
  For your application I recommend the etrailer Motorcycle Carrier for 2" Hitches # e98873 because it is rated for up to 500 lbs which should be more than enough for your 2006 Vespa LX150 and because it comes with and anti-rattle bracket that helps to reduce movement and noise while you are traveling. Be sure you have some ratcheting tie-downs like the Erickson # EM31353 to help secure your scooter to the carrier. If you'd' like to add a lock for both the carrier and scooter then I recommend...
  view full answer...
• Hitch and Motorcycle Carrier for 2018 Subaru Forester
  I recommend a 2-inch Class III hitch for your 2018 Forester since this size offers both higher weight capacity and broader compatibility with accessories like bike racks. The one I suggest is the Draw-Tite # 75876 because it offers relatively simple no-drill installation and you can see the whole install process in the video I linked for you. For a dirt bike carrier I recommend the etrailer # e98873. You can see this item in the linked video. The carrier has a 500-lb load rating and it...
  view full answer...
• Could etrailer e98873 motorcycle carrier Carry a Suzuki VanVan 200
  Your Suzuki VanVan 200 would definitely work on the etrailer Motorcycle Carrier # e98873 that you referenced. It would be a great choice for you. If you need a set of tie downs the Erickson Ratchet straps part # EM31353 would work well. They are easy to use and have more than enough capacity.
  view full answer...

Do you have a question about this Ratchet Strap?