Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow the cover to be opened or removed for easy maintenance.
Features:
Specs:
Note: Some vents may not open fully when used with this vent cover. If opened 50% or more, the vent will still achieve maximum airflow.
The MaxxAir II has a vent area that is twice the size of the vent area on standard covers. This provides more airflow in and out of your RV or trailer, and the side vents provide cross-ventilation for even more airflow. The angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out.
This MaxxAir II vent cover comes with 4 EZClip pins. These pins enable you to easily open or remove the cover. When the pins are removed from one side, the opposite side acts as a hinge, allowing you unobstructed access to your roof vent for cleaning and maintenance. To secure the cover closed, slide the pins back into the cover and push them up to lock them in place.
The MaxxAir II vent cover is specifically designed for installation on 2015 and newer-model MaxxFan and MaxxFan Plus roof vents - no drilling or tools are required. The integrated mounting brackets on the MaxxAir II perfectly align with the mounting tabs that are molded onto the flange of the roof vent. To install, fit the cover over the roof vent. Then slide the included EZClip pins through the tabs and rotate them up to secure the cover in place.
If you're installing this cover over an older model MaxxFan or MaxxFan Plus roof vent without mounting tabs, no drilling is required, and all necessary hardware is included. The MaxxFan roof vent has pre-drilled holes in the side wall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the side wall with stainless steel screws. Then insert the EZClip pins through the brackets to secure the cover in place.
If you're installing this MaxxAir II cover over any other roof vent, then drilling into the frame of the roof vent is required to mount the aluminum brackets. Stainless steel screws, nuts, and washers are included to install the cover. However, if you're installing the cover over a high-powered, high-speed ventilation fan, use the included self-tapping screws to mount the cover instead.
Average Customer Rating: 4.7 out of 5 stars (526 Customer Reviews)
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow the cover to be opened or removed for easy maintenance.Installed smoke color on all three vents of '22 GD Imagine 2600RB. Near perfect match to the factory AC cover. For this RV's factory vent frames (14"x14"), you do have to drill into each side of vent frame, but was no big deal. If placed correctly, the vent cover opens about 1/2-3/4 and clears the MaxxAir cover no problem. The only issue was that each vent cover included 4 bolts/nuts and 4 metal screws - each latch requires 2 fasteners, and there are 2 latches per side - that's a total of 8 fastens needed for the type of vent frame on this RV. I would have preferred to have a bolt/nut on all 8, but used a combination of the bolts and screws. If you're careful to no over-tighten the screws, they hold fine and can easily be replaced with bolts if they were to strip out. The fastener packaging did not appear to be damaged or as if parts were missed or lost in the box, was taped and stapled the same on all 3 as if it was supposed to be this way. ? For the expense of this very basic plastic cover, it should have 8 of each fastener type and the only reason for a star deduction; I don't think it's an etrailer issue, but not sure. Either way, was able to get all 3 installed in about an hour and they look and work great.
I have had the more advanced maxx air vents that have the built in motorized rain cover and lower almost flat to the roof when off.
However, when camping under trees, driving down the road, etc, I like the idea these protect the fan cover and if crack over time are an easy replacement.
also offer a little heat relief in the summer with the sun not directly hitting the lid.
I received it vary quickly after ordering it. through the seven + years we have had our RV we have replaced this MaxxAir roof vent about 3 times. This is not due to quality, it is stored outside in the sun (Florida) and all the miles we have traveled (about 13,000 miles) where it takes a beating. I might add that once it is installed for the first time replacement is vary easy, I use 4 clips rather than 2 bolts and 2 clips. This helps when removing it to clean around the MaxxAir roof area and the fan hood.
Fast shipping, easy installation, and fresh air circulation during afternoon Rocky Mountain rain storms.
I am impressed. Arrived fast. Packaging was perfect, and no damage. The installing of these two covers went flawlessly.
Thank you
Kevin
10/16/2023
Still looks Great.
Mike L.
11/8/2023
Fantastic design that clips right into place. No drilling or screws needed since it was a newer Maxxair roof vent fan. This Maxxair cover took longer to climb onto the roof than it did to just put the 4 clips into place. Also love the smoked color as it still lets light in.
Delivered fast (7.0 days) to Alberta, Canada, in great condition: no scuffs, no scratches - impressive when considering how large these vents are and how much plastic surface is on them.
Thanks also to UPS for taking good care of this large package during shipping.
Dk
6/10/2023
One year later: they remain fantastic. With these covers: I leave my vents open all the time, allowing heat of the day to escape. I have Maxxair vents that auto-close if it rains. Definitely would buy again, I cant live without them anymore.
Mike L.
7/12/2023
etrailer has been more than gracious and communicative in keeping us posted about these roof vents. One year ago today I placed the order for these vents and they have been backordered until recently. They were so patient with us.
Since we just received them yesterday we have not had time to install them.
Thanks again!
Clay F.
3/25/2023
Finally had them installed about 6 months ago. They work well and as intended. They keep rain out when vent is opened when it is raining outside.
This is the fourth MaxxAir II I have owned. The product is well constructed and easy to install.
Easy 1 minute installation ! (4) pins to attach to existing roof loops beside vent!
Customer service was the best !! received product sooner than promised and was prefect ! item is a replacement for one that was damaged due to a hail storm in Texas. Thank You Etrailer and Peyton !
Love these things. We added to them to our new Airstream after having covers on our prior Airstream. We live in the rainy Pacific Northwest and so having these allow for us to keep the fans open unless it is really pouring. The Smoke also allows for some light to come. Of all things, we get asked about these by fellow Airstreamers when we're on the road.
Covers are great and arrived early
These domes should be factory included!!! They are perfect for leaving the vent open a bit, and not having to worry about the weather!
Direct replacement for existing cracked ventilator cover. Installed easily.
These work great with the Maxxfan & Maxxfan Plus! Very easy and no holes to drill and nothing to worry about sealing.
GOT THE SMOKED ,LOOK GREAT VERY EASY INSTALL! SEEM HEAVY DUTY GOOD QUALITY . I WOULD BUY AGAIN, THEY CAME WRAPPED WELL SO THEY WOULD'NT SCRATCH.
Delivered on time. Easy to install and and the smoke was available unlike other sites
LOve the flexibility of being able to keep the vent lid open in windy conditions or if there is risk of rain.
I bought 3 of these vent covers, only to find 1 odd-man-out would not fit. I returned that one, and bought the right cover, for vents with fans, and also received it quickly. Installation of all 3 was easier than I anticipated. The Smoke color allows some light to pass, making me and my spouse very pleased. All-in-all, works well, looks good.
Fits = Perfect. Very Easy to install.
I was told by two customer service representatives at etrailer that this vent cover had a bug screen; which I purchased (separately). It has NO BUG SCREEN -- so if you're looking for a vent cover with a bug screen (separate product) move on. I read ALL the e-trailer online Q&A and despite all the Q&A this fact is not clear. THERE IS NO BUG SCREEN FOR THE MAXXAIR II Hope this helps someone. etrailer did credit the price of the bug screen they told me to purchase - Thank you!
work like they say and fit perfectly. Was a easy upgrade.
Product did not fit my rv.
But i have to pay return shipping!!
Katrina B.
6/6/2023
So this cover is designed specifically to fit 2015 and newer MaxxFan and MaxxFan Plus roof vents with mounting tabs. If you have an older model or a Fan that is not MaxxFan, then its possible that this will not fit your application.
work very well to keep rain out and allowing air in, easy install
I installed our new MaxxAir II vent covers today and they look and function great. The installation was easy, especially with ground support from my wife. Thanks honey! I look forward to the increased functionality of our trailer vents now that these covers are in place. I also appreciate the peace of mind in having another layer of protection from troubling weather. Due to our crazy times and supply chain chaos, it took a long time for these vents to arrive. However, it was well worth the wait. The folks at etrailer were fantastic throughout. Thanks!
Do you have a question about this RV Vents and Fan?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Scott
10/21/2023
Had these a year and still lookwork great with no issues.