Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow the cover to be opened or removed for easy maintenance.
Features:
Specs:
Note: Some vents may not open fully when used with this vent cover. If opened 50% or more, the vent will still achieve maximum airflow.
The MaxxAir II has a vent area that is twice the size of the vent area on standard covers. This provides more airflow in and out of your RV or trailer, and the side vents provide cross-ventilation for even more airflow. The angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out.
This MaxxAir II vent cover comes with 4 EZClip pins. These pins enable you to easily open or remove the cover. When the pins are removed from one side, the opposite side acts as a hinge, allowing you unobstructed access to your roof vent for cleaning and maintenance. To secure the cover closed, slide the pins back into the cover and push them up to lock them in place.
The MaxxAir II vent cover is specifically designed for installation on 2015 and newer-model MaxxFan and MaxxFan Plus roof vents - no drilling or tools are required. The integrated mounting brackets on the MaxxAir II perfectly align with the mounting tabs that are molded onto the flange of the roof vent. To install, fit the cover over the roof vent. Then slide the included EZClip pins through the tabs and rotate them up to secure the cover in place.
If you're installing this cover over an older model MaxxFan or MaxxFan Plus roof vent without mounting tabs, no drilling is required, and all necessary hardware is included. The MaxxFan roof vent has pre-drilled holes in the side wall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the side wall with stainless steel screws. Then insert the EZClip pins through the brackets to secure the cover in place.
If you're installing this MaxxAir II cover over any other roof vent, then drilling into the frame of the roof vent is required to mount the aluminum brackets. Stainless steel screws, nuts, and washers are included to install the cover. However, if you're installing the cover over a high-powered, high-speed ventilation fan, use the included self-tapping screws to mount the cover instead.
Average Customer Rating: 4.8 out of 5 stars (585 Customer Reviews)
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow the cover to be opened or removed for easy maintenance.We have had these on our Brinkley Model G3500 for the past year and they have worked great! Our last RV we always fought with the cheaper model fan and flimsy covers during rain storms and ever won. With the MaxxAir fans and covers we no longer have that fight. Our problem now is the fans are too good and suck the heat and cold right out! Great product and I have had zero issues with them.
I bought one as an experiment. It was easy to install and functioned just as I had wished. I immediately ordered two more for my trailer. They arrived within 3-4 days. I have been very happy with etrailer and their products and service.
I think every new trailer should have the MaxxAire vent covers as standard equipment.
Received unit and was slightly skeptical of its fit. after cleaning the inside of the fan cover, I installed new Max AirII with the built-in tabs on my unit and the locking clips. test ran vent cover up and down. mine does stop as it touches the Max Air, as designed. have to wait for a rainstorm to test again and see if it stays open. as designed the sensor would always close it, so couldn't vent moisture out, while showering. If it works as I hope, I will buy another one for my kitchen vent. pricing is the best I have found so far. E-Trailer, you're the best!!
Very easy to install with the Max air2 vent fan .
Great covers that allow for safe ventilation while rv is in storage or on the road.
Great vent cover and very easy installa tion.
On time, perfect fit, and made in USA.
Ups got my delivery a day later than I paid for.... supposed to fit, but I had to trim the cover to fit.... not complaining about the cover, once trimmed it fit but should have fit out of the box according to the expert.... wish it had screen, but, I'll add it later....
The vent cover is a quality product and was very easy to install.
Easy install using existing tabs.
E-Trailer is so easy to work with.
Just what I was looking for. Easy to in stall.
Not the greatest place to buy parts. After spending sometime on the phone trying to order the correct MaxxAir II fan cover I was still sent the wrong item. I returned the item and was charged over half the price of the vent fan price itself in coverage on shipping. I was never informed that if the part was incorrect it would be up to me to pay postage to return. Unacceptable in my book.
Exact replacement.
Sorry to say they were the wrong ones for my Rv. The dealership told me the wrong ones. My Rv has different fans then they said it did.
Works as supposed to; Maxxair does not allow power vent/fan to open ALL the way but don't know if it really matters.
A bit more translucent than opaque. Will allow light in.
Michael
3/4/2024
Very happy with the vent covers. Allows me to have the vents open while in storage with no concern about rain intrusion. A real problem solver.
Nicely engineered with great finish AND made in the USA!
Product arrived as scheduled,easy to install, great price. Thanks etrailer!
Delivery was quicker than expected and at a great price. Thank you E-Trailer!
Craig
9/3/2023
Great, installation was simple.
Fit perfectly over my rain sensing powered roof vents. Took longer to get up on the roof of my RV than it did to install the covers. All I had to do was slide supplied spring clips into the existing slots
Easy Install with no holes in the roof.
Received products quick and had a great followup by etrailer crew.
Mike C.
9/8/2023
They held up very well and allowed us to leave vents open while traveling and in the rain. We traded the camper in on a new 5th wheel so we need to buy them again
Ready install, worked as advertised. I had to be careful that the cover did not interfere with the existing vent cover - the maxair had to be placed as far to the rear of the existing vent to allow the existing cover to clear the maxair - not much wiggle room.
As Described, Fast Shipping, Great Product & Service I will use Etrailer again, Thanks
Very happy with the service from beginning to end!
Do you have a question about this RV Vents and Fan?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John B.
4/26/2024
The MaxxAir vents have been working out no trouble with them at all, they hold up to wind and rain and keep things dry.